diy factory aux location with aftermarked hu

[battleversiontc]

these are for the people that have a aftermarket hu and want to retain the factory location aux this is so you dont have the mini to mini jack wire running down off the face of the hu or just want to add it if you dont have an i pod

things you would need
rca male to female depending on location 1 to 6 foot
aux input adapter for hu
rca to female mini jack
male mini to male mini jack
drill bit depending on how big the female mini jack
glue gun or glue stick and a torch

ok first step plug aux input into hu

next step find your stock location of the aux or where ever you want to put it. pop out the existing aux jack and chuck it haha.

then take your drill bit. drill out the hole to the exact diameter of the aux

then put the rca to female mini jack input in take your glue gun and surround it let it harden before you let go

then all you have to do know is plug the rcas in run it back to the deck and then enjoy

ill try post pics up as soon as possible to give you a visual look in to how to do it

but the pics will come off a tc but its the same concept