PDA

View Full Version : Need help on vibration.


Red Horse
10-31-2008, 10:24 PM
I just change my oil & fillter today, I used 3 qt. and 1 cup of royal purple syntetic 5w-30 and a mobil 1 103 filter. I followed the DIY correctly,but whenever i drive around then stop,feel a vibration for 1 or 2 second only and it was'nt there before i change oil. Should i put more oil? or its too much? cause im having a hard time to see the measurement of the light purple oil on the dip stick.

b_hickman11
10-31-2008, 10:45 PM
You might want to go back underneath and make sure your filter is on tight and your plug. Also I would go ahead and add the rest of that 4th qt. of oil.

gid
11-01-2008, 12:03 AM
You might want to go back underneath and make sure your filter is on tight and your plug. Also I would go ahead and add the rest of that 4th qt. of oil.
the car will be at the FULL mark with only 3 and 1/2 quarts . Just did oil change yesterday and is at FULL . This has been the case since we've ownd both YARIS and a '07 PRIUS .

touroxin
11-01-2008, 12:07 AM
I can second that. It took 3 and a half quarts when I did my oil change last weekend.

Red Horse
11-01-2008, 04:48 PM
thanks for the help. I just added half on the 4th and now it runs fine.