Official Eyelids Pics Thread

[tk-421]

http://i206.photobucket.com/albums/bb182/bionic_seahorse/samples-gb3.jpg

http://i206.photobucket.com/albums/bb182/bionic_seahorse/02.jpghttp://i206.photobucket.com/albums/bb182/bionic_seahorse/01.jpg
http://i206.photobucket.com/albums/bb182/bionic_seahorse/03.jpg

[SIPNGAS]

no eyelids..
http://i70.photobucket.com/albums/i96/leittare/4953217109_ORIG.jpg

Rockin' the attitude with the eyelids..
http://i70.photobucket.com/albums/i96/leittare/calendar2.jpg

[tk-421]

Nice! Thanks Lisa. :thumbsup:

[engelm_]

TK, are you going to be doing a GB for these again... Also, when you did it, how much did the Sedan ones go for.

[tk-421]

TK, are you going to be doing a GB for these again... Also, when you did it, how much did the Sedan ones go for.
I will not be conducting GBs for the forseeable future, but Garm (cali yaris) is keeping these in stock. Please contact him if you'd like a set, and then remember to post some pics! :wink:

[Astroman]

http://i209.photobucket.com/albums/bb3/astroman87/DSC01000.jpg
http://i209.photobucket.com/albums/bb3/astroman87/Identity-4.jpg
http://i209.photobucket.com/albums/bb3/astroman87/Burien%20Car%20Show/WinningYaris-4.jpg
http://i209.photobucket.com/albums/bb3/astroman87/Burien%20Car%20Show/Shiningmytires1.jpg

[tk-421]

Thanks, Astro! :thumbsup:

[cali yaris]

nice pics! I have these in stock for both liftback and sedan.

[PETERPOOP]

too bad they don't come painted. that'd be accommodating.

[engelm_]

GAH, I want them.....

Stupid holidays, and school.. BOOOOO for minimum wage jobs.

[YAR1S]

too bad they don't come painted. that'd be accommodating.

My point exactly. I'd buy a pair if they were painted.

[tk-421]

Well, it's out of the question as far as I'm concerned. There's just too many variations between countries to deal with, and refunding paint jobs gets old real quick.

[lita_g]

I know this may sound like a dumb question for everybody here, but what's the purpose of eyelids? Is it just for show? or does it have a functional purpose too?

[cali yaris]

Just for show. Agreed on the painting, sorry!

[drbilal]

http://i430.photobucket.com/albums/qq30/bilalasgher/IMG_0069.jpg

http://i430.photobucket.com/albums/qq30/bilalasgher/IMG_0067.jpg

[eTiMaGo]

Some better pics of mine...

http://memimage.cardomain.com/member_images/9/web/2469000-2469999/2469203_71_full.jpg

http://memimage.cardomain.com/member_images/9/web/2469000-2469999/2469203_72_full.jpg

http://memimage.cardomain.com/member_images/9/web/2469000-2469999/2469203_74_full.jpg

Mind you these were the V2 eyelids which did not fit quiiiite as well as the current ones :smile:

[derickveliz2]

http://derickveliz.googlepages.com/YarisFrontCTP.jpg

http://derickveliz.googlepages.com/YarisOvercastFrontsmall.jpg


This one works great. Thanks tk-421

http://derickveliz.googlepages.com/YarisComp2.JPG

[ZING]

Those SKC headlights are amazing, how much did they cost?

[Moura]

Do you guys remember when I was mad, because I thought they were not good for the 5door model? hehe

This is How I was trying to set them up (LOL):

http://i268.photobucket.com/albums/jj26/Bfamim/P1020420.jpg


And this is how they look now:

http://i268.photobucket.com/albums/jj26/Bfamim/IMG_1983.jpg


http://i268.photobucket.com/albums/jj26/Bfamim/P1030320.jpg


With lights on:

http://i268.photobucket.com/albums/jj26/Bfamim/P1030211.jpg


The one from the left needs to be slightly reajusted, but havent been in a mood for real perfection, lol.

Cheers and thanks to TK for the work he had to post them to Europe ;)

[tk-421]

Thanks for the pics, Moura! Glad you liked them. :thumbsup:

[Treyz]

Do you guys remember when I was mad, because I thought they were not good for the 5door model? hehe

This is How I was trying to set them up (LOL):

http://i268.photobucket.com/albums/jj26/Bfamim/P1020420.jpg


And this is how they look now:

http://i268.photobucket.com/albums/jj26/Bfamim/IMG_1983.jpg


http://i268.photobucket.com/albums/jj26/Bfamim/P1030320.jpg


With lights on:

http://i268.photobucket.com/albums/jj26/Bfamim/P1030211.jpg


The one from the left needs to be slightly reajusted, but havent been in a mood for real perfection, lol.

Cheers and thanks to TK for the work he had to post them to Europe ;)


BWAHAHAHA ... Yeah I remember that! I was one of the people that helped you diagnose your problem. Looks good now :thumbsup:

[Treyz]

Before the carbon hood ...

http://i6.photobucket.com/albums/y203/Treyz/100_2588.jpg

http://i6.photobucket.com/albums/y203/Treyz/100_2584.jpg

http://i6.photobucket.com/albums/y203/Treyz/100_2589.jpg

http://i6.photobucket.com/albums/y203/Treyz/100_2590.jpg


After the carbon fiberhood (wrapped in black vinyl)

http://i6.photobucket.com/albums/y203/Treyz/DSC01486.jpg

http://i6.photobucket.com/albums/y203/Treyz/DSC01494.jpg

http://i6.photobucket.com/albums/y203/Treyz/DSC01464.jpg

http://i6.photobucket.com/albums/y203/Treyz/DSC01440.jpg

[tk-421]

Wow that looks hot! :drool:

[derickveliz2]

http://derickveliz.googlepages.com/Yaris_Sears.jpg

[jpadua]

My eyelids are DIY :) Silver Vynil Sticker
http://www.jaypadua.com/vios/vios_eyelids1.jpg
http://www.jaypadua.com/vios/vios_eyelids2.jpg
http://www.jaypadua.com/vios/vios_eyelids3.jpg

[drbilal]

Nice ride. Why does the 3rd pic look like the kit is slightly detached?

Interesting eyelids.

[derickveliz2]

My eyelids are DIY :) Silver Vynil Sticker



Your night shots are AWESOME

[YarisFan007]

http://derickveliz.googlepages.com/Yaris_Sears.jpg

That's sexy!

[zenabi87]

where can i buy some eyelids?

[drbilal]

contact caliyaris

[tk-421]

My eyelids are DIY :) Silver Vynil Sticker
Looks nice! Did you get vinyl matched in that color?

Nice ride. Why does the 3rd pic look like the kit is slightly detached?
I don't see it. :iono:

contact caliyaris
+1

[jpadua]

@derickveliz2

Thanks! that was a good shot... by the way, you're ride looks really awesome with the eyelids, I think the red color really brings out the contrast with the headlamps.

@drbilal
thanks, about the kit, I placed a rubber lining in between the kit and the bumper. just incase I decide to remove the kits.

@tk-421
it was lucky! I wasnt sure if it would match, actually its a bit darker, but I guess it looked good with the lighting.

[Stargate YARlantIS]

Thanks to Garm, I got these really quick! My 3yr old niece says she looks mad w/ the eyelids.

[custom Lftback]

what did you paint them with?

[Stargate YARlantIS]

what did you paint them with?

who me?

[Pitt Yaris]

for those vinyl stickers, looks awesome. would love to do that with flint mica, much much cheaper.

[Prohibit]

You might be able to see mine in my signature.

[Yarisight]

14986

I finally got the hood and lids painted TK. This was from group buy 2. I was the only Blazing Blue from group buy 2. The color didn't match USDM Blazing Blue, so I had the lids repainted when I got my CF hood painted. PIST OFF YARI UNITE! :evil:

[Yarisight]

Another shot...

[Yarisight]

.

[tk-421]

Thanks for the pics, Yarisight! That's an aggressive look right there... :evil:
Sorry about the paint thing... It is really hard to get some colors to match OEM sometimes, especially when I don't have an actual USDM part to compare it to.

[derickveliz2]

I finally got the hood and lids painted TK. This was from group buy 2. I was the only Blazing Blue from group buy 2. The color didn't match USDM Blazing Blue, so I had the lids repainted when I got my CF hood painted. PIST OFF YARI UNITE! :evil:

Now that looks cool :w00t:

[msfire671]

do these eyelids come off easily? meaning could someone just go up to your car and yank them off? if so then i think ill go with the vinyl..cheaper and i wouldnt have to worry about getting off work on day and its missing....damn vandals!

[Treyz]

not really. But then again, I guess it also depends on what version you have. No one really steals these to begin with and most people who modify our cars are on here. I have v2 which still have a base to them. I believe it's v3 that have that part eliminated.

[tk-421]

do these eyelids come off easily?

It is NOT easy to remove the eyelids, as long as you use the 3M tape that I recommend, which is designed to bond with the plastic parts of your car. Then again, if someone tries to pry them off, they may damage the eyelids, which means that at least that idiot won't be able to use them for anything.

I have v2 which still have a base to them. I believe it's v3 that have that part eliminated.

The difference between v2 and v3 is essentially just the base, as Treyz correctly mentioned. The base may help a bit on this issue, but not really. The upside of not having the base is that the eyelids are much closer to an OEM look, and there's virtually no rubbing when opening/closing the hood.

So, in essence, the eyelids are as secure as any other "add-on" body part that is attached to your car (be it a spoiler, rocker panels, etc). Obviously those parts will be more secure if they are drilled/bolted in place as well as taped, which is something that cannot be accomplished with the eyelids.

[Herbicidal]

I will not be conducting GBs for the forseeable future, but Garm (cali yaris) is keeping these in stock. Please contact him if you'd like a set, and then remember to post some pics! :wink:

Guess I'll jump onto the eyelid band wagon. Ordered up a pair from Garm today. Next I need to order the paint and probably some clear coat. He recommended AutomotiveTouchUp.com for the supplies. Looks like $19.95 for the spray paint (12oz) and $7.95 for the clear coat (12oz). They make it real easy to get the right paint. Total shipped to my door is $36.23. Just paid for those items too.

I'll post some before and after shots. It will probably be in January before I can get it done. :cool:

[tk-421]

I'll post some before and after shots. It will probably be in January before I can get it done. :cool:

That's great news! Looking forward to those pics.
Please let us know about that paint touch up service! That would really help a lot of people decide on getting those lids for their cars.

[YAR1S]

meh as soon as these start coming in colors... let me know and I will be sending money your way for sure.

[Treyz]

The difference between v2 and v3 is essentially just the base, as Treyz correctly mentioned. The base may help a bit on this issue, but not really. The upside of not having the base is that the eyelids are much closer to an OEM look, and there's virtually no rubbing when opening/closing the hood.
Once I got mine, I test fitted them over and over sanding down what ever was needed. Got the gap even on both sides so that there is no rubbing.

[Herbicidal]

Once I got mine, I test fitted them over and over sanding down what ever was needed. Got the gap even on both sides so that there is no rubbing.

Good tip. I"ll do the same, then paint.

[tk-421]

Good tip. I"ll do the same, then paint.
Actually, you don't need to do that. You'll be getting v3's. :wink:

[Treyz]

Yup .. what I did was for Version 2 and probably those that have version 1 could do the same if they wish.

[Luna V 2.0]

So if I get these I'll have to probably paint them. Does anyone by any chance know what the color "Blaze Blue" is known outside of Toyota? I don't want to mess up the color and have to repaint it.

Oh and how much would it cost to have these painted?

Edit: Sorry hadn't noticed someone went over price already. Either way, if anyone actually knows what Blazing Blue is known as to the rest of the world, it'll save me some guess work (and possibly some money). heh

[Treyz]

The color code for the paint should be on the door panel.

[tk-421]

Either way, if anyone actually knows what Blazing Blue is known as to the rest of the world, it'll save me some guess work (and possibly some money). heh
Here are two good links that provide that information:
http://www.automotivetouchup.com/
http://www.toyotareference.com/#YA

[Yarisight]

So if I get these I'll have to probably paint them. Does anyone by any chance know what the color "Blaze Blue" is known outside of Toyota? I don't want to mess up the color and have to repaint it.

Oh and how much would it cost to have these painted?

Edit: Sorry hadn't noticed someone went over price already. Either way, if anyone actually knows what Blazing Blue is known as to the rest of the world, it'll save me some guess work (and possibly some money). heh

USDM Blazing Blue Metallic is 8T0. My local auto body shop had no problems matching my lids and hood dead on.

[Treyz]

Only color anyone will have a real problem with is Bayou Blue. It's kind of a PITA to match.

[msfire671]

thanks for the info treyz and tk!

that'll be next on my list to go on my yaris!

[Herbicidal]

Received my eyelids yesterday, thanks Garm! Just waiting for the paint. Looks like that will arrive sometime next week. I'm not sure how quickly I'll get to paint them. May need to wait for drier weather.

Question, those of you with them painted and installed, did you paint the underside too? Any advantage or disadvantage?

[Treyz]

Just follow the instructions on the can. I don;t know exactly where Roseville is in Cali, but if you are in southern Cali, should be no problem as long as the weather is over 50 degrees and there is low humidity. If not, then I would suggest indoors then.

[Herbicidal]

Just follow the instructions on the can. I don;t know exactly where Roseville is in Cali, but if you are in southern Cali, should be no problem as long as the weather is over 50 degrees and there is low humidity. If not, then I would suggest indoors then.

Thanks Treyz. I'm in northern CA, near Sacramento. Did you paint the underside of the eyelids too? It would almost seem that the rough unfinished surface of the eyelid next to the headlight would hold the doublesided sticky tape better then if it were painted. :iono:

[tk-421]

Thanks Treyz. I'm in northern CA, near Sacramento. Did you paint the underside of the eyelids too? It would almost seem that the rough unfinished surface of the eyelid next to the headlight would hold the doublesided sticky tape better then if it were painted. :iono:

There is no need to paint the underside of the eyelids. The 3M tape will be able to stick to both painted or unpainted surfaces just the same, though.

Just make sure to paint the edges in order to make it look like it's painted all over. :thumbsup:

[Treyz]

The bodyshop did mine since I was having other work done (keymarks taken off). They did paint the underside though.

[ZING]

Astroman, where did you get the "got yaris?" sticker hehe

[jpadua]

Finally installed my eyelids, thanks again to Cali Yaris for the eyelids, they are fantastic, it really looks like a part of the car.
http://www.jaypadua.com/vios/lr_viosbackdrop.jpg
http://www.jaypadua.com/vios/lr_viosfront.jpg
http://www.jaypadua.com/vios/lr_viosangle.jpg
http://www.jaypadua.com/vios/lr_vioseyelid.jpg

[niveks240]

check these out! love how agressive it makes it look :thumbup:
http://i118.photobucket.com/albums/o115/niveks240/DSC07777.jpg
http://i118.photobucket.com/albums/o115/niveks240/DSC07774.jpg

[Benggolf2]

Eyelids....how appropriate! Looks cool, like a lady with fake eyelashes. :tongue: (j/k)

[Treyz]

check these out! love how agressive it makes it look :thumbup:
http://i118.photobucket.com/albums/o115/niveks240/DSC07777.jpg
http://i118.photobucket.com/albums/o115/niveks240/DSC07774.jpg
Where did you get those from? Looks odd lol.

[niveks240]

its still a prototype for NIAbodykits.com

[Treyz]

Interesting ...

[eTiMaGo]

check these out! love how agressive it makes it look :thumbup:
http://i118.photobucket.com/albums/o115/niveks240/DSC07777.jpg
http://i118.photobucket.com/albums/o115/niveks240/DSC07774.jpg

not bad, but they completely block out the turn signal???

[niveks240]

yeah but honestly you can see the reflection. and looks awsome.

[Herbicidal]

Here's a teaser...the weather was warm enough over the past weekend that I made a lot of progress on getting my set painted and clear coated. The Flint Mica came out great! However, to my rather discerning eye, there is a little too much 'orange peel' in the clear for my tastes. A buddy at work paints motorcycles as a side business and he's going to take a look at my work so far and make some suggestions. Based upon my description today, he thinks that perhaps gentle wet sanding with some 1,200 or 1,500 grit sandpaper might do the trick, then spray on another coat or two of clear to finish it off. I'll post up the final pics when they are ready. Stay tuned!
:headbang:

[PHXDEMON]

Anyone know where I can get carbon fiber eyelids for the 3dr liftback?

[tk-421]

Stay tuned!

Keep us posted!

Anyone know where I can get carbon fiber eyelids for the 3dr liftback?

You can get an unpainted set and get them wrapped in CF. Garm sells both items through the store.

[Herbicidal]

Wow, it's been awhile since I bought them but they are finally done! The color match was perfect! I used 3m double sided molding tape, cut to fit using a razor blade, then applied to the back of the eyelids then carefully attached them. Now my little guy has a more aggressive look. I'm very happy with the way they turned out. I hope you think so too. :thumbsup:

Paint, clear coat and eyelids before prep and paint:
http://www.yarisworld.com/forums/images/funkygarage/799/S_100_5040.jpg

Before installing eyelids:
http://www.yarisworld.com/forums/images/funkygarage/799/S_100_5134.jpg

After install:
http://www.yarisworld.com/forums/images/funkygarage/799/S_100_5137.jpg

Angle view:
http://www.yarisworld.com/forums/images/funkygarage/799/S_100_5138.jpg

[tk-421]

Thanks for the pictures! Your car looks great. :thumbsup:
So it looks like our question has been answered. AtuomotiveTouchUp.com is the best place to get some matching paint for a decent price!

[Herbicidal]

Thanks for the pictures! Your car looks great. :thumbsup:
So it looks like our question has been answered. AtuomotiveTouchUp.com is the best place to get some matching paint for a decent price!

Thanks much! :smile:

Yeah, my buddy who paints motorcycles was quite impressed. The key is to do many 'lite' coats, giving about 5-10 minutes between them. Wet color sanding with 1200 - 1500 grit paper makes them nice and smooth. I did the wet sanding between the paint and applying the clear coat. I'll let them cure for a few weeks, then I'll do the polish and wax thing to seal 'em up.

[Noogie]

The car looks great. Very neat job.

[Herbicidal]

The car looks great. Very neat job.

Thank you!

[cali yaris]

I'm posting these for Belta S:

http://i92.photobucket.com/albums/l25/theoperator_2006/yariss004.jpg

http://i92.photobucket.com/albums/l25/theoperator_2006/yariss002.jpg

[tk-421]

They look good in that color! Nicely done, Belta S!

[tk-421]

Eyelids club members: Please read this and reply. I really could use your help! http://yarisworld.com/forums/group.php?do=discuss&gmid=86#gmessage86

[derickveliz2]

Eyelids club members: Please red this and reply. I really could use your help! http://yarisworld.com/forums/group.php?do=discuss&gmid=86#gmessage86


Sure no problem...

http://derickveliz.googlepages.com/YarisHRDDorchesterblurrS.jpg

:thumbsup:

[tk-421]

Thanks Derick! That's a really nice pic. :thumbsup:

[Herbicidal]

Eyelids club members: Please read this and reply. I really could use your help! http://yarisworld.com/forums/group.php?do=discuss&gmid=86#gmessage86
Done. :headbang:

[tk-421]

Done. :headbang:
Thanks! :respekt:
Any generous LB members out there? :biggrin:

[tk-421]

Here you go TK you can use any of these if you would like.
Thanks Mike! :thumbsup:

[Herbicidal]

I took a few more pics tonight. Here's a couple, there are a few more in my album. I guess the sedan's are covered. :thumbsup:

http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=553

http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=555

[tk-421]

Nice pics!
Yeah I think I have enough sedan pics. Now I just need a few more LB pics and I'll get cracking on this project. :thumbsup:

[Yarisight]

Nice pics!
Yeah I think I have enough sedan pics. Now I just need a few more LB pics and I'll get cracking on this project. :thumbsup:

TK good luck with your project. If you need more LB photos you can use my pics if you want to....I think they are on page 3 or 4 in this thread.

[tk-421]

TK good luck with your project. If you need more LB photos you can use my pics if you want to....I think they are on page 3 or 4 in this thread.
Thanks dude! I appreciate the gesture. :thumbsup:

[YarisSedan]

http://www.geocities.com/animesrule1/eye1.jpg

[PHXDEMON]

anyone know where I can get the CF eyelids for a liftback?

[tk-421]

anyone know where I can get the CF eyelids for a liftback?
The way I would approach that would be to get an unpainted set (http://shop.microimageonline.com/product.sc?categoryId=5&productId=67) and CF wrap (http://shop.microimageonline.com/product.sc?categoryId=6&productId=30). Those two items are available on the MicroImage store. :thumbsup:

[PHXDEMON]

The way I would approach that would be to get an unpainted set (http://shop.microimageonline.com/product.sc?categoryId=5&productId=67) and CF wrap (http://shop.microimageonline.com/product.sc?categoryId=6&productId=30). Those two items are available on the MicroImage store. :thumbsup:

good suggestion. but I want real CF.

[eTiMaGo]

that stuff is real CF, but in a convenient adhesive-backed form.

You could take the eyelids to be CF-wrapped, but it'll essentially be the same thing, though with maybe a more durable/glossy finish.

BTW I took my old ones out of storage, I think it'll soon be time to disable the ugly starship LEDs on my headlights and return to the mean look :biggrin:

[wiirenet]

Thanks! :respekt:
Any generous LB members out there? :biggrin:

If you still need pics I'll hopefully be splurging on eyelids within the next month..... I'll prob be tinting my windows first though, then I'll see how much money I want to spend things I don't need but want lol. Ugh, I should be saving money for a vacation I already have set up in May but I keep wanting to buy stuff for my car!

[tk-421]

If you still need pics I'll hopefully be splurging on eyelids within the next month..... I'll prob be tinting my windows first though, then I'll see how much money I want to spend things I don't need but want lol. Ugh, I should be saving money for a vacation I already have set up in May but I keep wanting to buy stuff for my car!
Well, it's all about perspective. The way I look at it, my car mods should last a lot longer than any vacation I take. Plus, you'll spend a lot more than what's needed for tint+ lids anyway.
Thanks for the offer to take some pics. I could really use some more LB ones!

[kustom play]

i'll go out and snap a few pics for you

when i got them the white was off a little

tk offered to give me like 20% off or something but they are a solid product and it wasnt that bad

it might of been because its a phoenix car and the paint might of faded a bit

http://www.4055design.com/yaris/eyelid_01.JPG

http://www.4055design.com/yaris/eyelid_02.JPG

http://www.4055design.com/yaris/eyelid_03.JPG

http://www.4055design.com/yaris/eyelid_04.JPG

http://www.4055design.com/yaris/eyelid_05.JPG

[tk-421]

i'll go out and snap a few pics for you

when i got them the white was off a little

tk offered to give me like 20% off or something but they are a solid product and it wasnt that bad

it might of been because its a phoenix car and the paint might of faded a bit

I like that look, kustom play! Thanks for the pics. :thumbsup:

Paint fade is one of the reasons brand new parts don't match the car. Honestly though, I am pretty sure it had more to do with how much paint actually varies between countries. I need some paint samples from the actual car it's going to be installed on in order to get a perfect match.

Just out of curiosity: Did the white even out with the rest of the car over time?

[kustom play]

I like that look, kustom play! Thanks for the pics. :thumbsup:

Paint fade is one of the reasons brand new parts don't match the car. Honestly though, I am pretty sure it had more to do with how much paint actually varies between countries. I need some paint samples from the actual car it's going to be installed on in order to get a perfect match.

Just out of curiosity: Did the white even out with the rest of the car over time?

no its still off so i would assume the white must of been a tad bit different then my car

but like i said its not that bad and im happy with the product

[tk-421]

no its still off so i would assume the white must of been a tad bit different then my car

but like i said its not that bad and im happy with the product
Thanks :respekt:

[1NZYaris1]

Here's mine Thanks Tk :thumbup:

[shambala9er]

Just showing off mines thanks to Garm, I do not see what the big deal is about getting them painted they really transform the car. Thanks Garm.
http://www.yarisworld.com/forums/picture.php?albumid=157&pictureid=1233

[Treyz]

TK, putting mine back onto my new '09. We'll see how the look on the new headlights.

[TinyGiant]

yeah but honestly you can see the reflection. and looks awsome.

can i get a pic of the turn signal on? :) i'm considering getting a pair of these for yaris :)

[ScubaSteve]

Here's mine Thanks Tk :thumbup:

Any trouble with the colour match for the Copper Orange(Tucsan Sunset)? Got the same colour on my Yari and contemplating ideas for my car when I finally get away from stock.

[1NZYaris1]

can i get a pic of the turn signal on? :) i'm considering getting a pair of these for yaris :)

Here you go Chris :thumbsup:

[1NZYaris1]

Any trouble with the colour match for the Copper Orange(Tucsan Sunset)? Got the same colour on my Yari and contemplating ideas for my car when I finally get away from stock.

Hi Steve , As far as the color matching goes it really depends on
who's doing it for you , but i have not had any problem's yet , touch wood :tongue:

[t0m4s]

is there any DIY to put the eyelids? ... i just bought a pair and i dont know how to install them...
do i need to open the lamp? or it's installed over the lamp from the outside?

[tk-421]

Just showing off mines thanks to Garm, I do not see what the big deal is about getting them painted they really transform the car. Thanks Garm.

I agree! Getting them painted locally is quick and not that expensive. You also get the best results, since they match it to your car's paint.

Here's mine Thanks Tk :thumbup:

No problem, Ray! Thanks for the nice pics. :thumbsup:

TK, putting mine back onto my new '09. We'll see how the look on the new headlights.

I tested v3's on an 09 and they fit perfectly. I didn't need to change the design at all. Please post more pics of your awesome Yaris!

Any trouble with the colour match for the Copper Orange(Tucsan Sunset)? Got the same colour on my Yari and contemplating ideas for my car when I finally get away from stock.

Any reputable shop should be able to match your color without issues. Just make sure they use enough flint to match your color just right. :thumbsup:

is there any DIY to put the eyelids? ... i just bought a pair and i dont know how to install them...
do i need to open the lamp? or it's installed over the lamp from the outside?
There's no DIY per say, since the process is very simple:


Clean the areas with rubbing alcohol and let dry
Stick one side of the 3M tape below each piece
stick the other side on top of each lamp
press firmly on both eyelids and let them set 10-15 mins
Done!

[Treyz]

Here are v2's on my v2.0 ... I gotta admint, the curve fit's 100% beter for the base than they did on v1.0 lol ...

http://i6.photobucket.com/albums/y203/Treyz/IMG_9129.jpg

http://i6.photobucket.com/albums/y203/Treyz/IMG_9132.jpg

[spookz]

Awesome work Treyz, I always wanted to see how the eyelids will look on an '09. Thanks!

[msfire671]

another question...lets say we wanted to remove the lids with little to no damage...can it be done with a heat gun or extemely powerful hair dyer? would it damage both headlight and lid?

[eTiMaGo]

nice, treyz, awesome to see how well they follow the "kink" in the 09 headlights!

[Treyz]

another question...lets say we wanted to remove the lids with little to no damage...can it be done with a heat gun or extemely powerful hair dyer? would it damage both headlight and lid?

I can't tell you how many times I've taken mine off and put back on .. no problems at all. I'm running with version 2 of these eyelids which still has the base which was later eliminated for version 3.

1. Initial install
2. Removed, wrapped in vinyl, and reapplied
3. Removed for winter '08/'09
4. Reapplied for FL trip
5. Removed for trade in of '07
6. Reapplied for the new '09

[tristan]

Here are v2's on my v2.0 ... I gotta admint, the curve fit's 100% beter for the base than they did on v1.0 lol ...




awesome! I really wanted to get some eyelids but weren't sure if they fit the 09. thanks!

[Rnankoo]

where can you get the eyelids painted

[Herbicidal]

where can you get the eyelids painted

You can easily do it yourself. Check out www.AutomotiveTouchUp.com for the supplies. Back in December I paid $19.95 for the spray paint (12oz) and $7.95 for the clear coat (12oz). They make it real easy to get the right paint. Total shipped to my door is $36.23. Color match was spot on. Look back through this thread for some of my other posts around the December, January timeframe. I have some pics posted and how I prepped them.

Good luck! :thumbsup:

[msfire671]

I can't tell you how many times I've taken mine off and put back on .. no problems at all. I'm running with version 2 of these eyelids which still has the base which was later eliminated for version 3.

1. Initial install
2. Removed, wrapped in vinyl, and reapplied
3. Removed for winter '08/'09
4. Reapplied for FL trip
5. Removed for trade in of '07
6. Reapplied for the new '09

loooks awesome! :biggrin:
but how do you remove it and not damage it? my brother put it on for me but it looks a bit off..the way im looking at yours and everyones it looks flushed with the hood...thats the look im going for..
I got mine painted for $80.00..

so fellas...some tips to removing please! :help:

[Treyz]

loooks awesome! :biggrin:
but how do you remove it and not damage it? my brother put it on for me but it looks a bit off..the way im looking at yours and everyones it looks flushed with the hood...thats the look im going for..
I got mine painted for $80.00..

so fellas...some tips to removing please! :help:
Heat is the trick to making the double sided tape easier to handle. Either do it on a hot sunny day, or use a blow dryer to heat the tape up and carefully pull them off slowly.

What version of the eyelids do you have?

[msfire671]

i got the ones from garm!
thanks for the reply.

[Treyz]

Lol .. yeah, the ones that Garm sells are from TK ... probably Version 3's then.

[msfire671]

got it on...gotta fix one side though..its a pita to get it off!

[canadian_princess]

http://i430.photobucket.com/albums/qq30/bilalasgher/IMG_0069.jpg

http://i430.photobucket.com/albums/qq30/bilalasgher/IMG_0067.jpg

nice! my car only sexier! i need the grille and the eyelids.

[canadian_princess]

You can easily do it yourself. Check out www.AutomotiveTouchUp.com for the supplies. Back in December I paid $19.95 for the spray paint (12oz) and $7.95 for the clear coat (12oz). They make it real easy to get the right paint. Total shipped to my door is $36.23. Color match was spot on. Look back through this thread for some of my other posts around the December, January timeframe. I have some pics posted and how I prepped them.

Good luck! :thumbsup:

im trusting you about this do it yourself paint job. :eek: my color is silver streak mica. can i hit u up 4 any questions if need be? females tend to need assistance sometimes lol. and it was $36.23 lol.

[Treyz]

nice! my car only sexier! i need the grille and the eyelids.

:wub: hi!!!

[Herbicidal]

im trusting you about this do it yourself paint job. :eek: my color is silver streak mica. can i hit u up 4 any questions if need be? females tend to need assistance sometimes lol. and it was $36.23 lol.
No problem. I think the hardest part was to figure out a way to hold the eyelids so you can paint them and let them dry. You only need to get to the top and edges, the bottom can be left un-painted. I ended up using papertowel tubes, no papertowels on it of course, and taped them to the underside of the eyelids. Once they are secure, find a spot that you can set the tube down (standing it upright) and paint. Maybe stick a screwdriver into the ground and put the tube over it. Start the paint process by holding down the button on the spray paint can before you get to the eyelid and continue with the paint until after the eyelid. Hold the can about 8 - 10" away and move the spray can back and forth smoothly. Don't try to cover it in one or two passes. Be patient and follow the directions on the cans. Many light coats are better than 2 or 3 thick coats. Follow the same process for the clear coat, making sure the actual paint has had plenty of time to cure. Again, check the clear coat spray can for when it's safe to spray the clear. You can do it! :thumbsup:

[canadian_princess]

:wub: hi!!!

hello. :wink:

[canadian_princess]

No problem. I think the hardest part was to figure out a way to hold the eyelids so you can paint them and let them dry. You only need to get to the top and edges, the bottom can be left un-painted. I ended up using papertowel tubes, no papertowels on it of course, and taped them to the underside of the eyelids. Once they are secure, find a spot that you can set the tube down (standing it upright) and paint. Maybe stick a screwdriver into the ground and put the tube over it. Start the paint process by holding down the button on the spray paint can before you get to the eyelid and continue with the paint until after the eyelid. Hold the can about 8 - 10" away and move the spray can back and forth smoothly. Don't try to cover it in one or two passes. Be patient and follow the directions on the cans. Many light coats are better than 2 or 3 thick coats. Follow the same process for the clear coat, making sure the actual paint has had plenty of time to cure. Again, check the clear coat spray can for when it's safe to spray the clear. You can do it! :thumbsup:



oh shit i hope i didnt get the wrong color. its the exact same as those big pics right above. well, the one on my profile.i know theres a darker silver almost grey. thats not me.:frown:

[canadian_princess]

so< treyz... what the hell is a bayou yaris? lol

[Treyz]

Bayou Blue of course ...

http://www.yarisworld.com/forums/showthread.php?t=19

[canadian_princess]

oh. duh, sorry. thats like me saying 2007 streak yaris sedan. lol

[falker]

heres mine i thought i would do something a little different :biggrin:

[kac]

interesting for sure. How does that look with the lights on?.. no bad shadows or anything?

[Treyz]

heres mine i thought i would do something a little different :biggrin:
Use a blow dryer next time to strech the vinyl out so you don't have the folds/crinkles. You will need to pull off the headlights to be successful in that.

[falker]

Use a blow dryer next time to strech the vinyl out so you don't have the folds/crinkles. You will need to pull off the headlights to be successful in that.

yeah i pulled them off but i only had a blow dryer available
and its industrial window tint
but its only temporary till i buy some better materials

[Herbicidal]

oh shit i hope i didnt get the wrong color. its the exact same as those big pics right above. well, the one on my profile.i know theres a darker silver almost grey. thats not me.:frown:Any update?

[Treyz]

yeah i pulled them off but i only had a blow dryer available
and its industrial window tint
but its only temporary till i buy some better materials

Yeah, in this this case, Vinyl would be the best case, but you need to see what's translucent. But the tint should have contoured better with the heat though no?

[regal]

When they offer 09 LB headlights without the yeller side markers I'll get the eyelids, otherwise it just accenuates the problem.

[Treyz]

When they offer 09 LB headlights without the yeller side markers I'll get the eyelids, otherwise it just accenuates the problem.
What do you mean? I have an 09 liftback with the eyelids carrried over from the 07.

[regal]

What do you mean? I have an 09 liftback with the eyelids carrried over from the 07.

I mean the headlight assembly without the yellow side markers like you can get for 07-08. Adding eyelids to an ugly headlight just draws attention to the bad styling.

[lilredrocket]

^ Most states require that amber reflector. Toyota put them in the head light because if they put it anywhere else then it would have been "BAD" styling. If you take out amber reflector you will probably get ticketed for it alot. But if it really bothers you that much then bake your head light, pull them apart, and remove the reflector.

[canadian_princess]

Any update?

WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!:eyebulge:

[tk-421]

WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!:eyebulge:
Cool! Looking forward to those pics. :thumbsup:

[Yaris VVT-i]

Hi, i'm italian, this is my eyeline made in home :smile:

http://img91.imageshack.us/img91/3087/5copys.jpg

[Herbicidal]

WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!:eyebulge:
Yaaaay! You did it! Looks great. :smile:

[marlondog]

Anyone throw the eyelids on some of those Ebay projector headlights? I bet you it will look wicked as hell.

[marlondog]

Some of these cars looked stoned.

[ruimond]

Anyone throw the eyelids on some of those Ebay projector headlights? I bet you it will look wicked as hell.

Etimago's ride has it, was one of the first that i thought of. Can't remember who else has it this way.

Hrmm i might get some from Garm for my projectors. lol.

http://img269.imageshack.us/img269/2980/yarismay09031.jpg

[FreddysEvolutionIX]

WWWWWWOOOOOOOOO! i finished it! eyelids, paint, all finished! looks like i bought em! ill post a pic asap. looks sexy. then i just have to finish replacing the yaris and toyota emblems on back with the belta and TRD ones i bought for half! e-bay baby!!!:eyebulge:

You did them? Shoot....I did it. They came out sweet. Too bad they're not completely straight. Good enough.
BTW: notice how I'm following you?
TA 4E!

[tk-421]

Too bad they're not completely straight. Good enough.
How so?

[FreddysEvolutionIX]

Since they're the eBay eye lids they're not 100% perfect. I'll take a pic or I'll have her take a pic to show you guys. You barely notice it. Since I'm a big car freak I notice it like a sore thumb.

[pipexbn]

http://i30.tinypic.com/116m5on.jpg

http://i33.tinypic.com/bg1gth.jpg

http://farm3.static.flickr.com/2708/4076365165_c46a6c920b_o.jpg

http://i35.tinypic.com/kb1xi.jpg

http://i35.tinypic.com/2cxgihh.jpg

[JPMedina]

Hello...

Thanks to Bernardo, my new friend from Mexico D.F.

I leave mi new hot eyelids...

http://i37.tinypic.com/5vp56f.jpg
http://i33.tinypic.com/o074ux.jpg
http://i33.tinypic.com/1537cs2.jpg
http://i37.tinypic.com/2m5igjo.jpg

[wiirenet]

http://i1006.photobucket.com/albums/af189/wiirenetGeek/IMG_2818.jpg

[tk-421]

Thanks for all the pics so far!
Please keep them coming... :respekt:

[carmine]

where can i buy eyelids?

[tk-421]

where can i buy eyelids?
Welcome to YW! :thumbsup:
Check here: http://shop.microimageonline.com/product.sc?productId=67&categoryId=5

[YAR1S]

what thickness of 3M tape is everyone using? I have very thin stuff and somewhat thick stuff.... I Want it pretty flush to the hood line and yet not fall off or be ripped off by some hooligans, LOL.

[tk-421]

1mm thickness is the one I recommend. You could go lower than that, but I'm not sure if it will be sticky enough... (never tried)

[YAR1S]

thanks tk

[SweetRS]

love my eyelids

[Yaris4ever]

Welcome to YW! :thumbsup:
Check here: http://shop.microimageonline.com/product.sc?productId=67&categoryId=5

Is this the only place that sells them?
Are they easy to install?

[Herbicidal]

Is this the only place that sells them?
Are they easy to install?
Don't know, but definately a great place to buy from. :thumbsup:
Yes, double-sided tape works great! :smile:

[YAR1S]

http://i7.photobucket.com/albums/y294/Cheekyllama/YARIS/IMG_0914-1.jpg


<3 my eyelids

[tk-421]

Is this the only place that sells them?
Are they easy to install?

Yes on both counts. :thumbsup:

[Yaris4ever]

Yes on both counts. :thumbsup:

OK, thanks for that :w00t:

[Gatoblanco]

Can someone show me a before and after of the eyelids (even better if its on a white hatch). I am not sure if they are an improvement or not. Thanks

[tk-421]

Check the first and second posts in this thread for pics on white cars.

As far as the improvement thing, I think it sets the car apart from all others and makes it look more aggressive, which is something the Yaris could use more of, if you ask me. If you like that idea, then try them out. It's not like they're super expensive... You can always sell them here if you change your mind too.

[lammy29]

i want carbon fibre ones!!

[tk-421]

Any more pics YW members would like to share?

[Astroman]

Here is the first post-wreckpic w the eyelids on.

http://i209.photobucket.com/albums/bb3/astroman87/IMG00037-20100507-1942.jpg

[derickveliz2]

Bump...

http://i634.photobucket.com/albums/uu61/derickveliz/DSC_9494.jpg

[Kal-El]

Here is the first post-wreckpic w the eyelids on.

http://i209.photobucket.com/albums/bb3/astroman87/IMG00037-20100507-1942.jpg

Your car looks great.

How about painting the eyelids black to match your black hood line? That would look sweet.

[minired5stby]

Bump...

http://i634.photobucket.com/albums/uu61/derickveliz/DSC_9494.jpg

That looks cool on the Sedan too especially in red :w00t:. But what kind rims did you get they look great.

[derickveliz2]

That looks cool on the Sedan too especially in red :w00t:. But what kind rims did you get they look great.

Thanks,

they are O.Z. Ultraleggera 16x7 with 195/50/16.
:thumbsup:

[minired5stby]

Here is my new eyelids being shown off at T.O.R.C. show here in Cali:

http://i485.photobucket.com/albums/rr218/minired5stby/RevueToyotafest072.jpg

http://i485.photobucket.com/albums/rr218/minired5stby/RevueToyotafest071.jpg

[Astroman]

Your car looks great.

How about painting the eyelids black to match your black hood line? That would look sweet.

The hood is actually carbon fiber. I was going to have the eyelids wrapped in CF but after a test fit with them painted I decided to leave as is. I feel that leaving them painted really breaks up the carbon look while still looking agressive and clean. I used my blackberry to take that pic, will take a better one with the real camera soon. It really looks awesome in person.

[derickveliz2]

Before & After!

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/BeforeAfter2008-2010DerickVeliz.jpg


When I look at these pictures, I feel good. :biggrin::biggrin::biggrin:






.(o:






.

[Yaris4ever]

Finally getting my eye lids next week, I'll post some pictures when the job is done!

[RaizaYaris_pr]

Hi!
I need to know the price of the eyelids for a Sedan and also if you send them to Puerto Rico... Thanks in advance!

[tk-421]

Welcome to the forums :thumbsup:
You can get the eyelids at the microimage store (http://www.microimageonline.com/store)
And they ship worldwide, so you're covered.
Be sure to post some pics when you get them installed!

[eTiMaGo]

Before & After!

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/BeforeAfter2008-2010DerickVeliz.jpg



At first I was like :biggrin: but then I was :mad:

[Astroman]

The hood is actually carbon fiber. I was going to have the eyelids wrapped in CF but after a test fit with them painted I decided to leave as is. I feel that leaving them painted really breaks up the carbon look while still looking agressive and clean. I used my blackberry to take that pic, will take a better one with the real camera soon. It really looks awesome in person.

Yes I've quoted myself, lol. But I found a couple good pics to share showing the eyelids better, and I painted the grill BACK to black (stupid body shop assuming I wanted the galvanized wire look)

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs511.ash1/30177_1386950067890_1056187890_1083094_8029391_n.j pg
http://i209.photobucket.com/albums/bb3/astroman87/DSC01653.jpg

[custom Lftback]

^ looks great Astro

[Ayaz]

Maybe a Newbie question, but do they come pre-painted????

[custom Lftback]

no they do not

[brieghne]

does garm have a shop?

[custom Lftback]

shop.microimageonline.com

[Astroman]

They don't come painted for one reason is because there were some issues with them matching exactly to the cars paint. Mine did, but I got mine a while back from tk, and had to modify them to fit right. I had mine recently repainted after the accident because there were some rock chips and the dumbass shop spider-cracked one of them trying to pull them off. I kinda covered the ENTIRE underside of the eyelid with 3M heavy duty emblem tape.

[ERA]

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/BeforeAfter2008-2010DerickVeliz.jpg



hmm. ive taken and interest in the eyelids. seeing this, its very tempting.

[Herbicidal]

Yeah, they make quite a difference on the sedans. Gives them a meaner, more aggressive look. I'm quite happy with mine too! :thumbsup:

[derickveliz2]

It's was a must for me!

.

[1NZYaris1]

Up dated photo for you TK :thumbsup:

[tk-421]

That looks great, Ray! Thanks for the nice pics! :thumbsup:
I want an RS front like that... :cry:

[Herbicidal]

Love mine! TOTALLY changes the look, especially on a sedan. Bought my paint and clear from AutomotiveTouchUp as well.

http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=553

http://www.yarisworld.com/forums/picture.php?albumid=73&pictureid=552

[custom Lftback]

finally got mine installed today! they look SICK

[LA Yaris]

CF Wrap on my Eyelids

[Klink10]

LA....those and your car look very nice.

[darkMINI]

I used a vinyl decal sheet to make mine. A little different shape though.

[matthewai]

L R

[matthewai]

|||

[darkMINI]

I know, she's dirty.

[LA Yaris]

LA....those and your car look very nice.

Thanks!

[Rnankoo]

:w00t:http://i563.photobucket.com/albums/ss77/tugunsup/downsize_3.jpg

[purple vitz]

CF Wrap on my Eyelids


wow I've never seen eyelids on sedans before, they all look so kl!

[purple vitz]

Here are some neat eyelines too :)

http://www.shinko-chem.com/beck/vitz90/vitz90mca_type1_top2.jpg

http://www.shinko-chem.com/beck/vitz90/vitz_new_eyeline_smoke_top.jpg

http://www.shinko-chem.com/beck/vitz90/vitz_carbon_r.jpg

http://www.shinko-chem.com/beck/vitz90/vitz90_mcb_1.jpg

http://www.shinko-chem.com/beck/vitz90/vitz90_mca_1.jpg

[andrisetia]

Here are some neat eyelines too :)

http://www.shinko-chem.com/beck/vitz90/vitz90mca_type1_top2.jpg



where can i get this eyelines ? will it fits for yaris 2011 (facelift)?

[pokiou]

any1 able to post a link to where we can buy the sedan eye lids ? cheers

[derickveliz2]

For Sedan:
Just click on the:

LINK (http://shop.microimageonline.com/Eyelids-EL-01-up.htm)


:thumbsup:
http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/33ec06cc.jpg


D.

[pokiou]

thank you my good man... problem is i dont think they ship to australia :( lol

[derickveliz2]

thank you my good man... problem is i dont think they ship to australia :( lol

Ask Garm, probably he would make it possible!

D.

[cali yaris]

problem is i dont think they ship to australia

of course we do! But our shopping cart doesn't handle those orders, so please email us at sales.microimage@gmail.com

[lammy29]

hay garm just wondering whats the best things to use to stick the eyelids down?

[Herbicidal]

hay garm just wondering whats the best things to use to stick the eyelids down?Heavy duty double-sided sticky tape. From Home Depot or Lowes.

[lammy29]

dont have tht in uk but im sure b&q do it.

cant wait to put them on.... thanks to garm and brian!!!:thumbsup:

[dawin2122]

thats mine in process

[malibuguy]

wouldnt the eyelids on a 4dr affect light output?

otherwise they look really good...i may have to get a pair

[Kaotic Lazagna]

wouldnt the eyelids on a 4dr affect light output?

otherwise they look really good...i may have to get a pair

Nope, not 99% of the ones posted here. lol.

[derickveliz2]

wouldnt the eyelids on a 4dr affect light output?

otherwise they look really good...i may have to get a pair

Not at all!

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/35122773.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/f7e13e07.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/33ec06cc.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/BeforeAfter2008-2010DerickVeliz.jpg


D.

[rye7jen]

Not at all!

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/35122773.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/f7e13e07.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/33ec06cc.jpg

http://i634.photobucket.com/albums/uu61/derickveliz/Yaris%20Deadening/BeforeAfter2008-2010DerickVeliz.jpg


D.





:clap: :clap: :clap:

[latsyric]

nice pics! I have these in stock for both liftback and sedan.

hey I have a silver sedan and I was wondering how much you were asking for a pair of the eyelids?

Thank you

[1.5]

They're 69 on microimageonline.com but they're out of stock and have been for a while.

[lammy29]

http://i1192.photobucket.com/albums/aa329/lammy29/Mods/DSC_0420.jpg

[1.5]

So mean. I wish I could get a pair for my sedan. Its impossible to find any.

[testh01]

Hi
I am new here, and I feel the eyelid installed pics are so cool. For 2008 hatchback , where can I get them? Micro Image got sedan one available only . BTW I am from Taiwan ^^~

[tk-421]

I believe I have 9 remaining LB sets that are primed and ready for painting. I have a set with your name on it for $40 + shipping. PM me your paypal address if you're interested. :thumbsup:

[aznchic]

hey any word on when the eyelids for the sedan will be available again?

[tk-421]

I have the molds in storage but no fabricator willing to do the job... It's really hard to get only a few sets done at a time when the profit margin is so low.

[12 yaris]

Making my own.

[aznchic]

I have the molds in storage but no fabricator willing to do the job... It's really hard to get only a few sets done at a time when the profit margin is so low.

Man!! Should have bought these when I saw them a while back...now its too late :cry:

[Jo-län]

I'm new (here) and it would be awesome to get some for my sedan. :)

[aznchic]

I have the molds in storage but no fabricator willing to do the job... It's really hard to get only a few sets done at a time when the profit margin is so low.

Hey tk, how many committed ppl would you need in order to make them again? How much will they cost, $69?

[1.5]

I'm new (here) and it would be awesome to get some for my sedan. :)

GL with that. LMK if you find any, I want a set bad.

[Jo-län]

GL with that. LMK if you find any, I want a set bad.

Thanks, but Its really hard to find ones for the sedan version :frown:

[tk-421]

Hey tk, how many committed ppl would you need in order to make them again? How much will they cost, $69?

I'm willing to (re)start looking for a fabber once I can get at least 20 commited people on a list. (on a new thread if possible :biggrin:).

[1.5]

I'm willing to (re)start looking for a fabber once I can get at least 20 commited people on a list. (on a new thread if possible :biggrin:).

1. 1.5 07 sedan
2.
3.

[goliath1812]

1. 1.5 07 sedan
2. Goliath1812 07 sedan
3.

Gunna keep it in this thread, or start a new one?

[Kaykogi]

1. 1.5 07 sedan
2. Goliath1812 07 sedan
3. Kaykogi 09 Sedan
4.

[Jo-län]

1. 1.5 07 sedan
2. Goliath1812 07 sedan
3. Kaykogi 09 Sedan
4. Jo-Län 11 sedan
5.

[aznchic]

Ok guys I started a new thread for those that want a set! Its under "Sedan Owners! Sign up to get your eyelids here!" Hopefully it will attract more people to reply if they are looking for a set! Spread the word and let's do this!

[1.5]

great I hope we can make this come to fruition.

[Jo-län]

http://farm8.staticflickr.com/7090/7302714308_f63de8e969.jpg (http://www.flickr.com/photos/79655778@N06/7302714308/)
Untitled (http://www.flickr.com/photos/79655778@N06/7302714308/) by Jo-län (http://www.flickr.com/people/79655778@N06/), on Flickr

http://farm8.staticflickr.com/7223/7299450624_76a4f288f8.jpg (http://www.flickr.com/photos/79655778@N06/7299450624/)
Untitled (http://www.flickr.com/photos/79655778@N06/7299450624/) by Jo-län (http://www.flickr.com/people/79655778@N06/), on Flickr

http://farm8.staticflickr.com/7089/7299457526_907fd4537a.jpg (http://www.flickr.com/photos/79655778@N06/7299457526/)
Untitled (http://www.flickr.com/photos/79655778@N06/7299457526/) by Jo-län (http://www.flickr.com/people/79655778@N06/), on Flickr

[edwinwithtiar]

I had eyelids for my TRD Sportivo

[g.q.vios]

how do i post pics here????:respekt:

[tk-421]

just surround the link in img tags or click on the little image icon... Noob. :biggrin:

[SilverSquash!]

Hey are the v3 eyelids for 07 liftback available?

[Sam!]

Here's a couple of mine!

http://i943.photobucket.com/albums/ad277/samfitz89/0636AB28-70E9-4361-947F-BE9F3B4699B0-26152-00002BB3AB3D82AB.jpg

http://i943.photobucket.com/albums/ad277/samfitz89/C9B9D7A5-B89F-4CF4-B29C-7F57EF04BF4B-26152-00002BB39A0DC8ED.jpg