Log in

View Full Version : Sway bar opinions


Nelson
11-09-2008, 10:00 PM
From reading these forums, it seems that the anti sway bar is one of the most consistently appriciated mods to these cars. Most people are buying and installing TRD sway bars. But, what about other rear anti sway options like the GTSPEC Rear Sway Link Brace that is surely lighter than the TRD bar, about the same price.

What do all of you think? Why one or the other?

Thanks

CASTREX
11-10-2008, 12:54 AM
There is only one rear sway bar option... the TRD.

The GT and all other options are not sway bars. Those are chasis re-inforcement bars. Some people here will tell you that they work a lot of people will tell you they don't.

What I can tell you is that non of them perform the same function as the TRD one unit.
Go for the TRD:w00t:

cali yaris
11-10-2008, 01:14 AM
There is only one rear sway bar option... the TRD.

don't forget Ultra Racing, which is cheaper, but slightly less stiff. (19mm vs. 22mm for the TRD)

whoguy
11-10-2008, 01:22 AM
In Australia, I've got the Whiteline one...... no one else seems to have it... only me... :)

largeorangefont
11-10-2008, 02:21 AM
Get the TRD rear sway bar. It is the best bang for the buck handling mod you can do hands down.

The GTspec bar is not a sway bar.

Thread closed.

cleong
11-10-2008, 08:18 AM
You should be aware that there are pros and cons doing handling mods, as it changes the handling characterics of the car.

In the case of this sway bar, the car can become more tail-happy and could possibly catch you out if you're not careful. Although FF cars tend to understeer on power, they can suffer from lift-off oversteer and pitch you into a corner pointed the wrong way.

drbilal
11-10-2008, 08:28 AM
don't forget Ultra Racing, which is cheaper, but slightly less stiff. (19mm vs. 22mm for the TRD)

Whats the price on the Ultra Racing?

largeorangefont
11-10-2008, 05:24 PM
You should be aware that there are pros and cons doing handling mods, as it changes the handling characterics of the car.

In the case of this sway bar, the car can become more tail-happy and could possibly catch you out if you're not careful. Although FF cars tend to understeer on power, they can suffer from lift-off oversteer and pitch you into a corner pointed the wrong way.


The TRD bar is not even close to being that stiff. The car will still push at the limit with the TRD bar, lowering springs and stiffer dampers.

You would need coilovers with significantly heavier springs to get lift-off oversteer in this car.

ozmdd
11-10-2008, 08:08 PM
Is there any FRONT swaybar for the Yaris? I'm trying to stay in the stock class for AutoX, but definitely need something for body roll. Front bars are legal, as are adjustable shocks. Would coil-overs be considered different from adjustable?

cleong
11-10-2008, 09:31 PM
The TRD bar is not even close to being that stiff. The car will still push at the limit with the TRD bar, lowering springs and stiffer dampers.

You would need coilovers with significantly heavier springs to get lift-off oversteer in this car.

I think that's a matter of opinion as well as driving style. You also wouldn't see this on the road if you were driving sensibly.

Although you do have a point. I don't have a rear sway bar of any sort, but my lowered springs are stiffer than DF210s, and also an uneven drop, being lowered more in the front, and the car is quite pointy power off, and can kick its tail out when I brake heavily.

Just be aware that when you make handling mods, there are benefits but also drawbacks and drivers shouldn't expect the car to be as benign as it is usually set up straight out of the factory.

cleong
11-10-2008, 09:33 PM
Is there any FRONT swaybar for the Yaris? I'm trying to stay in the stock class for AutoX, but definitely need something for body roll. Front bars are legal, as are adjustable shocks. Would coil-overs be considered different from adjustable?

The Yaris has a front swaybar. Turn your front wheel fully to one side or the other, and look for a swaybar link that is attached to the suspension strut.

You can order a Cusco larger-diameter front anti roll bar.

ozmdd
11-10-2008, 10:37 PM
Thanks. I should have been specific that I was asking about aftermarket, but you took care of that for me! Definitely something for me to check out.

anonymous user
11-10-2008, 10:44 PM
It has been brought up that a larger FSB would induce more understeer without upgrading a rear-one. I'd have to concur on this, so get a trd one and go to STS class instead of H-stock. In the beginning you're not that competitive anyway, so just go have fun. As your driver skill improves, you should mod the car. Knowing how your car handles stock for a novice is very important for future mods. You'll know EXACTLY what is working for you and what mods are negligible or are actually detrimental to your performance.

cleong
11-11-2008, 12:03 AM
Just thinking out loud, since running a stiffer/thicker front anti roll bar makes you understeer more, perhaps removing the front anti roll bar will make you understeer less. That's assuming you already have stiffer lowering springs to begin with.

It costs you next to nothing to try out, you just have to undo the swaybar links from the struts.

largeorangefont
11-11-2008, 12:19 AM
Just thinking out loud, since running a stiffer/thicker front anti roll bar makes you understeer more, perhaps removing the front anti roll bar will make you understeer less. That's assuming you already have stiffer lowering springs to begin with.

It costs you next to nothing to try out, you just have to undo the swaybar links from the struts.

If you want lift oversteer, that is how to get it.

You don't want a bigger front bar, it will make the car plow into the corners, and unload the inside tire easier.

uncleyaris
11-11-2008, 12:24 AM
I have the TRD, and in the fall we did a great course here in the GTA which pushed the car and the TRD performed well!!!!!!!!!!!!

andries
11-11-2008, 01:52 PM
I go up two days with the TRD Sway Bar and it seems as I drive another car (positive opinion)
He is his money worth double.

Benggolf2
11-11-2008, 04:13 PM
The TRD is one of the most cost-efficient suspension mod anyone car make on his Yaris next to installing lowering/sports springs! :thumbsup:
Like Andries says, it's like driving another car! :burnrubber:

cali yaris
11-17-2008, 01:06 AM
Is there any FRONT swaybar for the Yaris?

yes, C-One makes a BEEFY front sway bar.

Homeboy
12-09-2008, 07:17 AM
I here nothing but positive reactions about the TRD sway bar, so I ordered one too.

But, is a the use of a front strut bar recommended or not? Does it have any effect? My car will be lowered with though shorter springs (- 1.5in).

andries
12-09-2008, 07:47 AM
I here nothing but positive reactions about the TRD sway bar, so I ordered one too.

But, is a the use of a front strut bar recommended or not? Does it have any effect? My car will be lowered with though shorter springs (- 1.5in).

:thumbsup:

darkmoon87
12-09-2008, 10:12 AM
Wouldn't it be safe to get a tie-bar support in conjunction with the sway-bar setup?

Is there an aftermarket tie-bar available for our cars?

toad
12-09-2008, 07:10 PM
didn't i read somewhere long ago(pre-hack) that progress was developing a rear sway bar for our yaris? i've checked their website, but all i can find are the springs for our car. maybe it never materialized?

03Z33
12-10-2008, 01:09 PM
didn't i read somewhere long ago(pre-hack) that progress was developing a rear sway bar for our yaris? i've checked their website, but all i can find are the springs for our car. maybe it never materialized?

They never went into production on it. Still possible they will somewhere down the road but for now your choices are the TRD/Whiteline/Ultra Racing for the rear.

If you want even stiffer rear, you can incorporate one of the lower trailing arm chassis braces such as Nitto/Megan/GT-spec (all pretty much the same).

Front options are C-One and Cusco, C-One being a little bit larger (should be stiffer). I have a brand new C-one front sway bar for sale if anyone is interested, see the link in my sig.

toad
12-10-2008, 07:40 PM
thanks!