cali yaris built motor

[cali yaris]

Stupid YW hack. Here's some pics and specs again on my built motor. A lot of you know I'm still waiting on my tC to get done with body and paint so I can put the Yaris down, tune it and swap motors. I'll keep adding to this as I find more pics. So, besides all the turbo stuff I did so far....

Parts list for the build:
Motor bored & sleeved to approx. 1.6L
ARP head studs
CP pistons 9.5:1
Pauter custom rods
Twin-Fire Ignition Modules
CDI Pencil Coil set
AEM EMS management
Plug-n-Pin Kit for EMS
3.5 bar map sensor kit
Air Inlet temp sensor kit
Coolant temp sensor kit
Gauge-type wideband UEGO controller
Adjustable Fuel pressure regulator
World-Racing TBC-1 digital boost controller
2004 Matrix throttle

http://www.microimageonline.com/images/garm/motor/block-1.jpg

http://www.microimageonline.com/images/garm/motor/block-2.jpg

http://www.microimageonline.com/images/garm/motor/complete-1.jpg

http://www.microimageonline.com/images/garm/motor/complete-2.jpg

http://www.microimageonline.com/images/garm/motor/complete-3.jpg

http://www.microimageonline.com/images/garm/motor/complete-4.jpg

http://www.microimageonline.com/images/garm/motor/head-001.jpg

http://www.microimageonline.com/images/garm/motor/head-002.jpg

http://www.microimageonline.com/images/garm/motor/head-003.jpg

http://www.microimageonline.com/images/garm/motor/head-004.jpg

http://www.microimageonline.com/images/garm/motor/head-005.jpg

http://www.microimageonline.com/images/garm/motor/pistons-1.jpg

http://www.microimageonline.com/images/garm/motor/pistons-2.jpg

http://www.microimageonline.com/images/garm/motor/rods-1.jpg

http://www.microimageonline.com/images/garm/motor/rods-2.jpg

http://www.microimageonline.com/images/garm/turbokit/tbc-1.jpg

[darthbauer]

That's all pretty stuff ya got there Garm. :drool:

[cali yaris]

WOT = FEAR is my goal.

[pinoypizzaboy]

wow!! :clap::thumbup:

[darthbauer]

How much WHP are you looking to get out of this?

[eTiMaGo]

yummy car porn :biggrin:

[ChinoCharles]

Ugh.

[darthbauer]

I think we can all agree that Garm has to much money to blow on his cars.

[ChinoCharles]

Garm is paving the way for anyone that has ever wanted a 300 HP Yaris. I think it would be freekin' awesome/hilarious/jaw-dropping to beat a Ferarri in a Yaris.

[cali yaris]

I should probably go back to bone stock on the outside, for the most fun possible.

(just kidding)

[darthbauer]

Now you just need to work on those launches you love so much Garm. Then you will smoke everyone.

[ChinoCharles]

Naw, its way more funny to beat a Ferarri in a car that looks like a disco ball roller skate than it is to beat one in a stock econohatch.

I'm really just in this for the laugh factor.

[ChinoCharles]

Now you just need to work on those launches you love so much Garm. Then you will smoke everyone.

It was a launch on a dyno. Cut him some slack. :laugh:

[cali yaris]

nah he meant my 0-60 video -- I really do suck at launching consistently.

[ztrack157]

How many vital organs did you need to sell for this?

[m911gt]

damn Garm, beautiful work so far, I can't wait to see the end product.

[Ranggarn]

But seriously, the Yaris is a DAMN GOOD LOOKING CAR

If it could beat a ferrari... Jesus I'd have the perfect setup!

Kinda like a smart diablo for that matter... just sexier = )

[Malaya1221]

How many vital organs did you need to sell for this?

offtopic:i think, one kidney would suffice!:tongue:

would b fun just to have those on an all motor yaris!

[Thej3sta2]

Ohh yeah with beautiful itb's

[06silveryaris]

nice port job on the head.

[TheRealEnth]

nice nice nice!

[Thej3sta2]

oh yeah i just puked in my mouth

[Thirty-Nine]

Very impressive, Garm! I'm glad there are crazies ... er ... trailblazers out there like you willing to pioneer engine builds like this.

Honestly, we all benefit from your research and hard work!

[cali yaris]

Thank you!

[PETERPOOP]

paving the way for us. i will follow in your footsteps.

[kargoboy]

Garm, very nice...what are you doing on the tranny end to handle the power, in particular the clutch and differential?

[TinyGiant]

so what kind of HP do you expect and what kind of 0-60

you'll be at lotus status before long :)

[darthbauer]

so what kind of HP do you expect and what kind of 0-60

you'll be at lotus status before long :)

Idk if they were right but someone said something like 300whp.

[TinyGiant]

Idk if they were right but someone said something like 300whp.

thats insane..

lol i'd love to make my yaris into a little sleeper... but my wallet isn't thick enough

i cant wait to watch the incriminating youtube videos though

[staypuft]

maybe nst can make you some of them cams they made for the 86, now that would be hawtsauce,
cant wait to see the videos

[cali yaris]

kargoboy, I have already installed an Exedy stage I clutch and KAAZ LSD.

I'm considering a C56 trans swap, but that will have to come later.

tinygiant, my goal is 300 whp and I'd like to see this car get into the 11's or at least low 12's.

[TinyGiant]

you going to put anything into the exterior or leave it stock to blow some minds?

[darthbauer]

He's already got stuff done to the inside.

[TinyGiant]

i think you should get it painted like the exterior of a plane with the lines and rivets .. make it look like a rat rod.. or make it look rusty .. or better yet make it look super walmart cheezy

[cali yaris]

LOL, exterior is pretty much done, interior a few more parts but pretty close too

[TinyGiant]

is this in the white one? or is this a second yaris?

[darthbauer]

Yes, its the bad ass white one.

[richardholdener]

garm

I've tried a numbe rof times to get ahold of you via phone-any chnace you can give me a call-

Richard

[cali yaris]

I think 24 hours to respond is a reasonable response time, especially when you want something :wink:

Calling me out on the forum/jacking my thread to do so is not cool -- just my opinion.

[at3GG]

:drool: I'm driving out to cali to record this thing the first time its on the street!

[cali yaris]

at least i know my money is well invested

Yes -- with me, you know EXACTLY where the money is going. :laugh:

[mikenacarato]

the car is going to be amazing! love the build!

[toyochris]

nice build man!!! :eyebulge::barf:Is your fault i will have wet dreams with your yaris.:wub::wub:

[richardholdener]

I didn't realize I had crossed a line-I was just requesting a call. I Won't bother you again.

I think 24 hours to respond is a reasonable response time, especially when you want something :wink:

Calling me out on the forum/jacking my thread to do so is not cool -- just my opinion.

[Minne_Yaris]

did you say 11's or low 12's!!!! wow.. I can't wait for the day this happens... I'll gladly tell some of these punks out there "Yes We Can!"

[cali yaris]

haha, me too! Even high 12's would be exciting.

(Richard, call me anytime, just give me a day to respond. I believe it is a matter of forum etiquette to respect each other's privacy. There may be other points of view on this subject than just mine, however.)

I forgot to add the '04 Matrix throttle I got for this as well.

[at3GG]

Richard and Garm-

You two are the mad scientists behind our yaris dreams. So stop arguing and focus on making these eggs roll faster! ...please?

:respekt:

[cali yaris]

haha, you'll have to separate us. You can give me a timeout first. I'll go sit in my car now... :biggrin:

[Return of the Yarii]

Cali, I honestly thinked you jumped the gun, Richard was just asking that you call him....just my 2 cents.

[at3GG]

How about...for your timeout...I get to sit in your car instead. I really dont care which one. :thumbup:

[cali yaris]

I hereby apologize to Richard Holdener (on a public forum) for any disrespect I may have caused, insinuated or implied. Fair enough?

[justjesus]

Going back to the build....

Engine is looking sweet. I'll take 2, thanks. (not engines, minutes. as in 2 minutes of fun in the yaris when it's in !)

[PETERPOOP]

i am going to copy everything garm does.

[scioncrew]

quote: (nah he meant my 0-60 video -- I really do suck at launching consistently)

hi garm i wouldnt worry about that. the AEM will take care of that

[cali yaris]

hey look who it is -- the builder himself!! welcome to YarisWorld man!

[scioncrew]

Thank you! im just poking around seeing whats the talk of the today is :wink:

[Treyz]

Garm, let me know whn you're gonna ship it out to me.

:tongue:

Coming out great!

[dallas]

That's some pretty impressive engine machining and port work. What machine shop did the work and specifically the sleeving to allow for the oversize pistons? Could this be the work of Cosworth! Have you increased the valve size at all ? I better let you go so you can go knife edge the crankshaft LOL Keep us posted on this great project! :thumbup:

[PHXDEMON]

:bow: i want details garm. who did the block/headwork? where did you get the pistons? We all want details on how to build a 300 WHP Yaris. :biggrin:

[gboezio]

Don't forget the high volume fuel pump and bigger lines, clutch and axles.

Damn thick sleeves, are these Aluminium/Nikasil or ductile iron, by the color I'd say iron ?
One thing for sure is that engine and management is built to see up to 30 psi of boost, I don't have much details on the construction of the Yaris engine and drivetrain, I just hope it's strong enough to live behind a monster like this.

Thumbs up for the build and keep the pics coming :D

[Abodame99]

hey cali, what do you plan on doing after you put the built motor in? i say you put slicks on it and try to get 10 sec

[cali yaris]

bigger lines, clutch and axles.

Exedy Stage I clutch (very stiff)
Fortified axles from Drive Shaft Shop

fuel system will be upgraded as needed. in-tank pump would be preferable.

i say you put slicks on it and try to get 10 sec

I have drag wheels and slicks for it, but I doubt it's a 10 second car. Getting into the 11's would be thrilling, never done it.

[Brad D]

Do you guys have good luck with the twin fire? mine died in my S14 in just a few hours.. then I swapped in a DIS4 wire for wire they plug in the same.. But I like the Twin fire better for its smaller has less BS on it that the AEM takes care of any way.. and it can be triggered falling edge or rising edge.

[cali yaris]

have had mixed results with the coils. They were arcing, which we fixed with heatshrink (but shouldn't have to do that IMO). One has popped off so far, might need a bracket to really hold them down there solidly. Overall, ok, not fantastic, but the car is running real nice at 9.5 psi right now. Built motor swap is the next step, after I drive it a little bit.

[Brad D]

have had mixed results with the coils. They were arcing, which we fixed with heatshrink (but shouldn't have to do that IMO). One has popped off so far, might need a bracket to really hold them down there solidly. Overall, ok, not fantastic, but the car is running real nice at 9.5 psi right now. Built motor swap is the next step, after I drive it a little bit.


if you get the CBR coils (can be had for 50# a set on ebay) the plugs you need to use must have a screw off top, and the coil grabs on that thread.. but its hard to find good plugs that are like that, I run IK24's in my car.

Also if you cant fix the spark issues why not try the factory coils? they are a smart coil no? if so the AEM can run them direct with no ignitior or spark box (twin fire ect)

cool setup the car should fly... what do the 3drs weigh in at?

[yaris-me]

I didn't think a stripped block could look sooooooo beautiful!:eek::drool:

[id3379]

Awesome job so far garm, can't wait to see the finished product, you gunna be selling custom built engines now on micro image ;-) ?

[areithan1980]

he should:) then i'll have another thing to save up for :P great car btw! garm

[Derek3CE]

Cali,
Do you know how much the cylinder bore was increased by? I know the stock is 75mm; I'm just wondering how much it can be opened up by before risking thin walls on the stock iron sleeves.

[cali yaris]

I do not know if specs like that are made available to everyone, but I will ask. It's a small motor, there's not a lot of thickness there to play with as you said.

I think it's about a 1.6L now.

[CtrlAltDefeat]

so beautiful... :drool::drool::drool: So you are taking this thing cross country for a grand tour when it's done so us poor mid-westerners can witness this beast in person, right? I'm not sure if the wife will let me drive cross country to come see it. :laugh: Seriously, you inspire all of us. I cannot wait until it's done... Are you still thinking about using the paint job I suggested?

[aucorium]

Garm , i love your boost controller !!

all this turbo goodies got me thinking of turbo'ing my 1.3 2nzfe with the greddy turbo kit. anyone got in experience or info regarding issues with a bolt on kit like that ?

[cali yaris]

I wouldn't mind touring in it, I guess we'll see. Paint job is not on my mind quite yet!

[AlanSRT4]

so how much power did you make with it? how much it all run you?

[MANSETH]

OMG!!!:eek:
:clap::thumbup::thumbsup::w00t::headbang::bow::eye bulge:
:respekt:

[Altitude]

so how much power did you make with it? how much it all run you?

You should sit down for this - http://www.yarisworld.com/forums/showthread.php?t=21593
:biggrin:

[advocate]

You should sit down for this - http://www.yarisworld.com/forums/showthread.php?t=21593
:biggrin:

jesus can't believe i've never seen this post before... can't wait to see the car in person tomorrow.

[Yarimoto]

Wonder how much estimated that would cost for Garms setup(help me budget myself to get something close or what not lol). Soo sexy I think no wait I did just bust a nut. 300 lil speed demon.

[echosqwat]

Dang wish you had been around when we were trying to get more power out of Echos 8 years ago! This is cool stuff!

[cali yaris]

motor build + fuel system + standalone = approx. $8k, goodies like gauges, radiator, motor mounts, etc etc not counted.

Doesn't need to be nearly this fancy to make power though!

[vten]

hey Garm ,

if I bring you $8K ... would you do it for meh :biggrin:

[cali yaris]

A little more and leave your car for 3-4 weeks -- I will take care of it.

[PETERPOOP]

A little more and leave your car for 3-4 weeks -- I will take care of it.

If I was local, I so would.

[echosqwat]

motor build + fuel system + standalone = approx. $8k, goodies like gauges, radiator, motor mounts, etc etc not counted.

Doesn't need to be nearly this fancy to make power though!

8k? Sounds like some corner cutting? I spent $15K minimum on most of my stockish builds. But of course Porsches are a bit more expensive.