rear lip gasket

[808yaris]

Due to an accident, I had to replace my rear bumper cap. I removed the rear lip of the stock body kit and now I can't find the "gasket" that seals the top of the lip to the bumper. My painter told me to go to the dealership. The parts guys have no individual listing for the gasket and said it only comes with the lip. Any leads or advice is greatly aprreciated. This is on a 07 S sedan.

[spookz]

When you say gasket, are you referring to the rubber strips that fill in the tiny gap all around the top?

If so, your local Toyota dealer's parts dept should carry some. They come in 2 metre rolls at a cost of $6.00 AUD. (I'm not sure about Toyota in the states, but in Toyota Australia carries this part.)

[808yaris]

Thank you for the responses. Yes, it is the rubber strip that fills in the gap btwn the lip and bumper. The parts guys know what I'm talking about but can't do or get anything without a part #. I've tried aftermarket bodykit manufacturers but no luck in obtaining just the gasket. Looks like I'm stuck unless anybody else has advice.

[spookz]

Oh okay, my local panel beater also said they used this stuff all the time. So maybe you could go and ask your panel beater (and maybe he could obtain some from Toyota).

[808yaris]

I'll keep trying. Thanks spookz.

[808yarisLB]

Hey 808yaris, there might be a part number for it, because they sell everything separate most of the time. Some how they dont have the part number for the front and rear lip in the system, but they do have the side skirt seal part number. You can probaly use side skirt seal for the rear, and some time it comes in black or gray.

[spookz]

Yeah, it comes in either black or gray. Body coloured strips only come from factory unfortunately.