Maxxim Weight

[coheed]

Does anyone know the wheight on the maxxim screech's or the rota flashback's? I know that most people dont like "knock off" wheels but Id rather spend more money on tires than wheels.

[Tamago]

what size width and offset

[coheed]

Rota's 15x7 +40
Maxxim's 16x7 +38 13.6 lbs
And found another sat the same style, but still can't find the weight. :mad:
Drag DR20's 16x7 +40 12.7 lbs

Really looking at the Maxxims but don't know if they will rub because of the offset being lowwer. If that might be a problem I'll go with The Drags.

[kimona]

Maxxim, 16x7, ET38, OEM size 195/50/16 should be fine.

[thebarber]

Rota's 15x7 +40
Maxxim's 16x7 +38
And found another sat the same style, but still can't find the weight. :mad:
Drag DR20's 16x7 +40

Really looking at the Maxxims but don't know if they will rub because of the offset being lowwer. If that might be a problem I'll go with The Drags.

will 2mm of offset difference be the deciding factor on whether they rub or not?

[coheed]

Not sure thats why I brought it up. I dont honestly know. I'm thinking it all depends on tire choice. But I'm still not gettin the info I wanted. I would like to know how much the weigh each. I'm pretty sure their close but still. Any help would be appreciated. And I have look and searched.

[kimona]

Don't have the weight for you, but yes 2mm makes a significant difference on our cars.

[coheed]

So would +40 or +38 be better? edited the third post.

[kimona]

Ideally, ET42 or greater works best up front. With 15/16's, if you opt for ET38-40, then run 195mm rubber. With ET42 plus, you can run 205mm rubber.

[coheed]

Alright. So I'll go with the Drag's cause thier lighter and have the higher ET.

:burnrubber:

[kimona]

Here's something very similar on johnnypaseo's Vitz: If I reacll, they're Maxxim 16x7, ET38, with 195/50/16 tyres.

[coheed]

Was he lowered? I plan on gettin Tein's.

[dvlnblkdrs]

i run et38, 205-45 on tein coilovers, no rub

[coheed]

Nice, how low do you have it?

[dvlnblkdrs]

about 2 inches

[coheed]

Do you think I'd rub with just the Tein springs. Bout the same height but softer, obviously. Cant really afford coilovers on a college budget. :frown:

[dvlnblkdrs]

i think you'll be fine.. i could go lower if i wanted.. like another 3/4" or so.. u should be fine

[coheed]

Sweet thanks. :thumbup: