Pioneer Avic-D3 VSS wire problem

[TWEAKED_ICE]

So, I just installed an Avic-D3 on my girlfriends 09 Yaris-S, tapped the vss wire to the purple wire via instructions found here on yarisworld.... but, there is no signal coming through. Is it differenent on the 09? I would assume not, but I'm willing to try anything at this point.

Used this for reference:
http://www.tweakedice.com/img/yarisvssfuse.jpg

Any suggestions?

[TWEAKED_ICE]

Any help?

[eTiMaGo]

I'm not sure myself, really... What I do know is that between 07 and 08 the tach wires changed color from green to orange, so it is possible the VSS as well. If you can't match the wire color, maybe try looking up the actual pin location, that should remain the same.

[CTScott]

The easiest place to grab VSS is at the TPWS connector (behind the lower passenger glove box)

TPWS location:

http://i372.photobucket.com/albums/oo163/ctscott329/TPWSPicture.jpg


VSS wire location:

http://i372.photobucket.com/albums/oo163/ctscott329/TPWSConnectorPicture.jpg

[TWEAKED_ICE]

perfect! thank you for that, i'll try it out!

[ali077]

i need help plz... i drive a vitz trd turbo 2003. ive installed a pioneer vdp and i need a speed signal wire for the vdp to work. any1 can help?