Intake Update

[richardholdener]

Sorry it has been so long guys, but with the economy the way it is, the Yaris project took a backseat to other more profitable intake systems at Dynatek. I have done everything I can to convince the owner that the intake should be produced. We have finished the testing, already have the finished design ready for production but the cost of production versus the very small profit margin just isn't as appealing to the owner as the $5,000-$6,000 system we sell for the V8 guys. What I have done is to take this upon myself and pay for the production run to show the potential of this type niche market. I am going to get the intakes produced on my own dime. I am working with a couple of different fabrication shops to do the short production runs. I will post the completion date as soon as it is finalized. Again, sorry for the delay but the choice was between having and not having the intake available.

[ChinoCharles]

Thanks for the update Richard, and thanks for funding the project from your own pocketbook. That is remarkable. I'll be patiently (yet anxiously :smile:) awaiting the day you finish them up!

[at3GG]

:clap: :respekt: :w00t: :bow:

[Tamago]

because these are gonna be built by several small shops, what are the chances of them being 'not all the same' ?

[kou]

thanks Richard.

[ROCKLAND TOYOTA]

sooo this is now pushed back to what summer/fall?
"the Yaris project took a backseat to other more profitable intake systems" is a funny way of putting it and not something id expect to hear from mr holdner. i assume the xd/ts intake is also on hold due to the failing economy and better selling products you offer........

[mikenacarato]

well im sorry to hear its being delayed but thats also good for me. it will give me some time to comfortably resave the money.

[CASTREX]

Actually this should not be much of a surprise...

This is what is happening to many companies all across the US and their international ramifications...

I work for a US company here in Costa Rica and over the last few weeks several radical measurements have been put in place in order to dramatically decrease the expense in order to save the cash needed to sort the crisis....
All companies are saving their cash right now and putting must of their projects and investments on hold.

Yeah... is a shame for all of us but is just the way the things are right now...

Hopefully the crisis won't extend beyond this year...



Richard, thx for your efforts and please keep us posted

[richardholdener]

The intake swill all be manufacturered by teh same company-we are just looking into a couple to find best pricing, schedule and final product quality.

because these are gonna be built by several small shops, what are the chances of them being 'not all the same' ?

[richardholdener]

Though I have been pushing the yaris intake project from Day, the reality is that the owner ofthe business makes the ultimate decision, so the comments posted regarding cost effectiveness of the project didn't really come from me. That said, I sure like to know why you'd have me post anything but the truth-the formum members deserve no less.

sooo this is now pushed back to what summer/fall?
"the Yaris project took a backseat to other more profitable intake systems" is a funny way of putting it and not something id expect to hear from mr holdner. i assume the xd/ts intake is also on hold due to the failing economy and better selling products you offer........

[mikenacarato]

im with you richard. what the boss says has to go. im in this buy till the end.

[PETERPOOP]

same here. i'll be waiting for mine.

[thepoche]

Thanks for the update and don't forget about the long tube header, I want to buy that too :thumbup:

[NonStopTuning]

Good luck with everything Richard. All of us at NST wish you all the best!

:thumbsup::thumbsup:

[lilredrocket]

Thank you! I don't know why anyone would question you when you will put your own money on the line to produce an intake for the economoblie.

[ztrack157]

Why doesn't richard and NST hook up on this? It would be sweet.

[ROCKLAND TOYOTA]

Though I have been pushing the yaris intake project from Day, the reality is that the owner ofthe business makes the ultimate decision, so the comments posted regarding cost effectiveness of the project didn't really come from me. That said, I sure like to know why you'd have me post anything but the truth-the formum members deserve no less.

sorry if i hit a sore nail there but your enthusiasm through this whole thing on both forums has been motivating to some. i laughed after reading your comments posted as im sure so did others. i apologize if i often type what im thinking but at least its the truth rather than blow smoke up your ass. i'll be waiting for updates like everyone else seeing as now there's plenty of time to save now.....

[Doc Zaius]

Rock, stop being a dick.

Mr. Holdener, thanks for taking on this project by funding it. I hope it pays off! I can't make use of the intake (Blitz s/c owner), but will very patiently wait to hear about the header. Thanks again from YarisWorld. The choice between waiting and not having this performance option available is an easy one. :thumbsup:

[thebarber]

sounds good richard....taking one for the community?

could someone remind the estimated price of this thing again?

[KCALB SIRAY]

I believe it was $699, I could be wrong

[at3GG]

thats what I remember too

[PETERPOOP]

sounds about right.

[RagnaCaT]

Rock, stop being a dick.



:laughabove:Ha ha ha can't show an old dog new tricks! I've learned one thing in this forum Rockland is like that... :biggrin:

Other than that can't wait to see this on the streets!!!:evil:

[tk-421]

I might actually have enough money for this IM... Can ppl still be added to the list?
Also, I'd really appreciate it if Mr. Holdener could post the dyno graphs for the midrange mani (http://www.yarisworld.com/forums/showthread.php?t=10356) so that I can make a more informed decision. Thanks!

[mikenacarato]

i thought the midrange manny got dropped?

[tk-421]

i thought the midrange manny got dropped?
Not exactly. He is still waiting for enough demand for it, though. The top-end mani will be built first.

I'm sure more people will be interested in the mid-range version once they look at production pics of the first one, along with some nice dyno runs of both version.

[Thej3sta2]

mad respect yo

[PETERPOOP]

you will be waiting awhile for the midrange...

[tk-421]

you will be waiting awhile for the midrange...
I can be patient... Sometimes. :biggrin:

[kou]

update bump.

[mikenacarato]

:)

[PETERPOOP]

can't..........take.........this............waitin g...........it's...killing....me!!! AHHH!!!!!!!!

:bonk:

[LtNoogie]

While you all are waiting for the intake manifold, why don't you do a baseline dyno run now? I don't want to hear about how your butt dynos are measuring an extra 30 hp after the manifold.

[PETERPOOP]

I will maybe do that. However, not until my intake is paid for and being shipped my way. Until then, i will continue saving for a lip kit and turbo kit.

[cali yaris]

yeah no word from Holdener.... gotta wonder

[mikenacarato]

:(

[kou]

BUMP.

[thepoche]

The intake and header are the only mods i plan to do this summer... I hope Mr. Holdener doesn't abandon this project !

[PETERPOOP]

HOPEFULLY they will be out by then. Don't get your hopes up.

[Yoda]

pff abandonded

[AlexNet0]

wow... this sucks, I was planning to buy one of the ones garm got after the production run, if any

[yarstar]

I was wanting one too. Expecially to use the 1zz TB we both have. That would have been SWEET!! I'm holding out for R. Holdener.

[kou]

BUMP.:frown: