PDA

View Full Version : add power mirrors


mikenacarato
01-22-2009, 10:29 AM
what would one have to do to add power mirrors? im pretty sure the wiring is all there so i can plug up a switch, BUT are the mirrors in the car now ready for power as well or do i need new mirrors?

Shroomster
01-22-2009, 05:06 PM
need new mirrors.... the motor is in the mirror assembly itself....LIST:

- new mirrors (just swap the colored inserts to the enw ones be careful the clips are all facing each other, you'll see what I mean by that)

- fuse for under hood panel---or in car panel probably a 15a

- check to see if the wiring harness is there, if not you'll need a wiring kit that runs from the fuse panel to both door harnesses

- master door switch/ driver side panel switch assembly (dependent on where it goes)

- harness for this ^^^ might be included with the wiring harness for the driver side not mirror, not sure....