WTB: Rear 10mm Hubspacers

[tk-421]

I am interested in reasonably-priced 10mm hubspacers for my rear wheels. I've been searching all over the place and I can't find them anywhere.

http://www.onetongarage.com/products/rear_spacer_shim/product_pic_480x360.jpg

Thanks! :respekt:

[cali yaris]

I think Tamago was producing these or trying to at some point - hit him up.

[Malaya1221]

got mine from tamaga:tongue:...but i think he ran out of it...u might want to hit up scion forums and maybe ask around for evolved-concepts phone number...yaris and xd use the same spacers if i remember it correctly!

[Black Yaris]

mike at alliance auto

ebay

[RagnaCaT]

Good luck on getting them i also got them from Tamago, I got 2 sets and they are great it looks really clean compared to spacers

[tk-421]

I tried contacting Tamago, but he is not answering his PM's for some reason.
I tried going to the evolved concepts page, but it seems to be under construction.
I also found another site, but they don't have them in stock anymore.

[Malaya1221]

try contacting these guys and see if they make one for scion xa!

One Ton Garage (http://www.onetongarage.com/products/rear_spacer_shim/index.html)

[tk-421]

try contacting these guys and see if they make one for scion xa!

One Ton Garage (http://www.onetongarage.com/products/rear_spacer_shim/index.html)
That's the site I found while googling about... They don't have any in stock at the moment :frown:

[yarstar]

Bump to start watching this thread.


:thumbup:

[RagnaCaT]

That's the site I found while googling about... They don't have any in stock at the moment :frown:

I first checked there, the XA's are a no go for the Yaris but did hear that they made the one's Tamago sold :iono: But try Emailing them

[Tamago]

you HAVE to use yaris specific ones, or xD specific ones. xA/xB will not work

[Tamago]

email: gmprecision@sbcglobal.net

the guy's name is Mark. he's the guy who made my first 10 sets (and then proceeded to try to sell them behind my back.. but screwed up his own part by putting 10mm holes in them instead of 12mm holes)

he may have some of those spacers kicking around for cheap

[mikenacarato]

so we would have to bore the 10mm holes out to 12mm? thats not an issue at all but if thats the case he shouldnt charge full price for them for sure.

[tk-421]

email: gmprecision@sbcglobal.net

the guy's name is Mark. he's the guy who made my first 10 sets (and then proceeded to try to sell them behind my back.. but screwed up his own part by putting 10mm holes in them instead of 12mm holes)

he may have some of those spacers kicking around for cheap

Thanks! I'll see if he has a set available. :thumbsup:

[Thirty-Nine]

H&R TRAK spacers are nice units, too. I had them on my xB (10mm).

[Tamago]

so we would have to bore the 10mm holes out to 12mm? thats not an issue at all but if thats the case he shouldnt charge full price for them for sure.

i agree, and serves him right for trying to deal behind my back lol


btw, get your metric grade12 SHCS bolts from www.mdmetric.com

[yarstar]

Thanks! I'll see if he has a set available. :thumbsup:

+1

[cali yaris]

H&R TRAK spacers are nice units, too. I had them on my xB (10mm).

I have those in stock, but think tk-421 is looking for inside hub spacers and less expensive. :smile:

[mikenacarato]

i agree, and serves him right for trying to deal behind my back lol


btw, get your metric grade12 SHCS bolts from www.mdmetric.com

maryland metrics is way to high for me. ive bought stuff there before and they pricegouge the crap out of you. i can get it locally though anyways. :w00t:

[yarstar]

Are these what you are looking for? If they are and they'll fit, I'm gonna get a set too.

http://cgi.ebay.com/ebaymotors/Scion-xA-xB-3-8-Rear-Hub-Spacer-Shim-Kit-New_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 330305505985QQitemZ330305505985QQptZMotorsQ5fCarQ5 fTruckQ5fPartsQ5fAccessories

[tk-421]

Are these what you are looking for? If they are and they'll fit, I'm gonna get a set too.

http://cgi.ebay.com/ebaymotors/Scion-xA-xB-3-8-Rear-Hub-Spacer-Shim-Kit-New_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3 a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem 330305505985QQitemZ330305505985QQptZMotorsQ5fCarQ5 fTruckQ5fPartsQ5fAccessories
Hmmm.... Looks like those are pretty close (9.5mm)
But according to Tamago, xA/xB spacers will not work on the Yaris. Bummer... They do have a decent price... :frown:

[Tamago]

Hmmm.... Looks like those are pretty close (9.5mm)
But according to Tamago, xA/xB spacers will not work on the Yaris. Bummer... They do have a decent price... :frown:


they will not work. i've personally verified with my own two hands.

[Tamago]

maryland metrics is way to high for me. ive bought stuff there before and they pricegouge the crap out of you. i can get it locally though anyways. :w00t:

good luck finding the right 12MM bolt with correct thread pitch.. the bolt kits that went out with the spacers i sold last year came from mdmetric. cheapest prices i could find on THAT specific bolt

[1NZYaris1]

What size are they M12x1.25 , M12x1.5 or M12x1.75
and what length

[Tamago]

M12X1.25 IIRC and i purchased 50mm

[yarstar]

they will not work. i've personally verified with my own two hands.

Damn. And these were so cheap too.

The seller also tells me these won't fit a Yaris. I've ask him another question where they might be obtained.

Guys name is Mike. Looks like the same guy BlackYaris mentions in post #4.

[RagnaCaT]

they will not work. i've personally verified with my own two hands.

+1

[1NZYaris1]

Tamago or anyone , do you have a scale drawing of these hub plates , please.

[tk-421]

I think I found some compatible hub spacers:
https://www.carperformanceuk.co.uk/yaris-trilock-tailor-made-spacers-pr-26368.html

That picture has to be wrong though... And they're pricey too. :frown:

[Tamago]

that's not a hub spacer

[tk-421]

that's not a hub spacer
Yeah that's what I suspected...
This is what I'm looking for (or very close to it):

http://www.onetongarage.com/products/rear_spacer_shim/product_pic_480x360.jpg

[YarisSedan]

What about the spacer that goes in between the wheel and the hub. I think 10mm you may not even need to extend the studs.

[Tamago]

Yeah that's what I suspected...
This is what I'm looking for (or very close to it):

http://www.onetongarage.com/products/rear_spacer_shim/product_pic_480x360.jpg

well if you can find a machinist who's reasonable, i'll send him the drawings to make more.. in retrospect i should have had the machinist make 100 sets for me instead of only 10

[Tamago]

What about the spacer that goes in between the wheel and the hub. I think 10mm you may not even need to extend the studs.

10mm you WILL have to extend the hubs


but then this begs the question

why don't you just buy the correct offset wheel to begin with?