XXR 513's 16x7 +15

[Saggio]

XXR 513's 16x7 +15
195/45/16 Yokohama S-Drives

Tires aren't stretched at all. Might go with a 185 if I can find one.

I'll be spacing the rears out at least 10mm.
Rolling both front and rear fenders.
Possibly installing coilovers to get it down a little more.

These are the new wheels for the week lol.

I'll be taking better pictures later this week of them installed. These are just a few quick pictures to get the thread going.

BEFORE:
http://i148.photobucket.com/albums/s32/SaggioWRX/IMG_6272.jpg
http://i148.photobucket.com/albums/s32/SaggioWRX/IMG_6274.jpg
http://i148.photobucket.com/albums/s32/SaggioWRX/IMG_6276.jpg
http://i148.photobucket.com/albums/s32/SaggioWRX/IMG_6279.jpg
http://i148.photobucket.com/albums/s32/SaggioWRX/IMG_6278.jpg
http://i148.photobucket.com/albums/s32/SaggioWRX/IMG_6280.jpg

AFTER CUSCO COILOVERS AND ROLLING THE FENDERS:
http://i236.photobucket.com/albums/ff222/sb25347/IMG_2742.jpg
http://i236.photobucket.com/albums/ff222/sb25347/IMG_2744.jpg
http://i236.photobucket.com/albums/ff222/sb25347/IMG_2746.jpg
http://i236.photobucket.com/albums/ff222/sb25347/IMG_2741.jpg
http://verdugo.smugmug.com/photos/475200270_3LNG6-O.jpg

[marcus]

nice..rs spec should be 195/50/16 or just a tad larger 205/45/16

i am a fan of wide track setup although its illegal in canada..*sIGH*

[Thirty-Nine]

I love the look, but would require a different fit due to my coilovers. I love the style, thought!

[Saggio]

I love the look, but would require a different fit due to my coilovers. I love the style, thought!

Thanks! Yeah I'm going to be "fitting" the wheels soon.

[RHDVIPbB]

Looks similar to old school Watanabes

[Mead]

wasn't this car for sale a while back?

glad you kept it.

[marcus]

wouldnt that hit the fender if ur loaded specially the front..my friend stock yaris non rs when there is 3 people on the back the tire gets tucked in..

[AdeJong 03]

looks good man

[Franck_Qc]

question: why put tires much lower than those of origin?

185/60R15 = Overall Diameter: 23.74 in
195/45R16 = Overall Diameter: 22.90 in
Diameter Difference: 3.54% ! They say never exceeded 3% difference

source: http://www.1010tires.com/TireSizeCalculator.asp




.

[marcus]

[QUOTE=Franck_Qc;235669]question: why put tires much lower than those of origin?

185/60R15 = Overall Diameter: 23.74 in
195/45R16 = Overall Diameter: 22.90 in
Diameter Difference: 3.54% ! They say never exceeded 3% difference

source: http://www.1010tires.com/TireSizeCalculator.asp


i believe he did that due to rubbing issue that he might encounter..

[Saggio]

[QUOTE=Franck_Qc;235669]question: why put tires much lower than those of origin?

185/60R15 = Overall Diameter: 23.74 in
195/45R16 = Overall Diameter: 22.90 in
Diameter Difference: 3.54% ! They say never exceeded 3% difference

source: http://www.1010tires.com/TireSizeCalculator.asp


i believe he did that due to rubbing issue that he might encounter..


Correct. And I might even do a 185/45/16 on these wheels to stretch the tire to fit even better.
The car isn't near being done as far as how its going to look and sit.

[dinamix]

i think it looks awesome as is!..Thats a good stance if your gonna use it for daily driving..any issues with turning or handling?

[PETERPOOP]

car looks great. nice stance. you going to smoke your tail lights?

[TOUGEghost]

Those look sweet! I was thinking of getting a set since they have the dual bolt pattern and can also fit my 240.

[Saggio]

i think it looks awesome as is!..Thats a good stance if your gonna use it for daily driving..any issues with turning or handling?

Handling is great with 1 or 2 people in the car. When I get people in the back it rubs. I'm going to do a slight fender roll this weekend to get the rear wheels to tuck when I have people in the back.


car looks great. nice stance. you going to smoke your tail lights?

I have been thinking about smoking the rear lights. I want to get the JDM RS LED tails first. We'll see.

[PETERPOOP]

yah, go for the rs led tails. watch out for the replicas though. mine already has a LED that went out and the other side had a leak... err

[Saggio]

UPDATE:

So this weekend I added 5mm spacers in the rear making the rear a +10 offset, and the rear fenders were rolled last night. The wheels tuck right in the fender when I hit a bump. The only thing that rubs is the rear plastic bumper now.
I'll be getting coilovers sometime this week to stiffen up the ride, and lowering it another 2".
I'll have it lowered a total of 4" when i'm done.

Will post pics soon... stand by and look for further updates :)

[marcus]

wow.. hey when you roll fender do you need to repaint it..would that crack the paint?

anyways does anyone knwo what the lowest set up for me not to rub when car is full..so far i got 16x7 +40 offset i think this should rub at all even with trd springs and fully loaded car. but i wanna go lower of wider..

[Saggio]

^^^New pics added!^^^ (1st post)

[yarisugi]

Wow Saggio, love those "after" shots. That's like the perfect stance in my eyes.
Amazing what nice wheels and a no-gap drop can do.

[ruimond]

Wow looks great. Mmm Coilovers. Makes lowering springs look like its not even low. Haha.

[2006fronty]

WOW, that looks real good! How does it ride being that low? :eyebulge:

[Ryu]

Wow, that is a nice low rider there, it looks SICK.

I LOVE IT !!!

[Saggio]

WOW, that looks real good! How does it ride being that low? :eyebulge:

It actually rides really nice with the coilovers. I have them set to the stiffest setting too.

The dampening of the Cusco Coilovers rock!


Thanks everyone for your kickass comments :biggrin:

[Prohibit]

im.. in love.

[marcus]

very nice... now how do you drive that thing..lolz.

[cali yaris]

My paint cracked a little when I rolled my fenders. Can we see some closeups of the edges? You probably used the cool tool with the urethane rollers -- I used a baseball bat, LOL

[Thirty-Nine]

So, adding the camber in front reduces any rubbing I assume?

[yarisugi]

Are you still able to fit the BBS wheels with these Cusco coilovers or is it not possible any more?

[Saggio]

My paint cracked a little when I rolled my fenders. Can we see some closeups of the edges? You probably used the cool tool with the urethane rollers -- I used a baseball bat, LOL

I did use the fender roller with the urethane wheel on it. No cracks, just rub marks from the tires lol.


So, adding the camber in front reduces any rubbing I assume?

You are correct. Otherwise the fender was sitting right on the wheels since its do low. I might raise it 10-12mm.



Are you still able to fit the BBS wheels with these Cusco coilovers or is it not possible any more?

The BBS's will fit, they were just a test fit a few weeks ago. They are a friends set of wheels. He has close to $3000 into them. I didn't want to drop that much for wheels.

[minired5stby]

Looks good man keep it up.

[phenoyz]

XXR 513's 16x7 +15
195/45/16 Yokohama S-Drives

http://i236.photobucket.com/albums/ff222/sb25347/IMG_2746.jpg

http://i236.photobucket.com/albums/ff222/sb25347/IMG_2744.jpg


:evil:VERY VERY VERY NICE !!!:evil:

[ddongbap]

Are you rocking the subie stars on ur toyota spot?

[SailDesign]

Are you rocking the subie stars on ur toyota spot?

I noticed that, too. Interesting....

[chief broom]

He owns a subaru performance shop

[Never Enough]

Insane! looks great...

[Saggio]

http://verdugo.smugmug.com/photos/475200270_3LNG6-O.jpg

[808_Yaris]

nice pic. are there any other pictures to see the side view?

[YarisFan007]

Whoa! That's rad!

[YarisFan007]

UPDATE:

So this weekend I added 5mm spacers in the rear making the rear a +10 offset, and the rear fenders were rolled last night. The wheels tuck right in the fender when I hit a bump. The only thing that rubs is the rear plastic bumper now.
I'll be getting coilovers sometime this week to stiffen up the ride, and lowering it another 2".
I'll have it lowered a total of 4" when i'm done.

Will post pics soon... stand by and look for further updates :)

May I ask how what brand are those spacers?... Also, how much are they?

[808_Yaris]

clean car. lol i see the other pics ;)

[whooppee777]

i found online places that rent fender rolling tools. is rolling the fenders something an average joe can do on his own or should it b left to a body shop where guys do it all the time?

how do u roll the plastic bumpers? the fenders and rear quarter panel make sense but how do u make it flush with the bumpers?

[Saggio]

i found online places that rent fender rolling tools. is rolling the fenders something an average joe can do on his own or should it b left to a body shop where guys do it all the time?

how do u roll the plastic bumpers? the fenders and rear quarter panel make sense but how do u make it flush with the bumpers?

You can't roll the plastic bumper unfortunately :frown:

You need a heat gun for sure if your going to do it yourself. And take your time!

[Nagoya_TRD.]

Car looks awesome. The first yaris i have seen with close to proper fitment.

I wonder how it would look with a small 3 mm spacer in the front.

[YarisFan007]

nice Subaru emblem!

[marcus]

bery clean bery clean.

[Russelt3hPirate]

the rear of the yaris doesn't have any "fender" to roll.

did you guys flare them out a little or just squish the little curved portion?

[Saggio]

the rear of the yaris doesn't have any "fender" to roll.

did you guys flare them out a little or just squish the little curved portion?

The rear was flared. Almost a 1" lip was flared.

[whooppee777]

can we get closer pix of the rear, mainly where the the bumpers meet the body/fenders and what not?

[kou]

.

[Saggio]

Ill take a few close ups for you today.

[Typerex187]

^ great job Saggio, for the front did your roll the tabs?

[Saggio]

^ great job Saggio, for the front did your roll the tabs?

Yes, tabs are rolled along with anything else that was poking on the inside of the fender.

[BURRITO]

wait, how old is this thread?... oh well, im a newb.

i want the same thing but i dont want to lower my car and i definitely dont want to rub.

awsome car.

[JumpmanYaris]

wait, how old is this thread?... oh well, im a newb.

i want the same thing but i dont want to lower my car and i definitely dont want to rub.

awsome car.

It's gonna look hediously

[gamerXp]

very cool...