PDA

View Full Version : Cool Scangauge holder

1NZYaris1
03-03-2009, 11:10 PM
:biggrin: Thanks Garm for the Scanguage and custom holder (MicroKats),
Now i just need to find a suitable area for install :wink:
SIPNGAS
03-03-2009, 11:11 PM
Cute...lol...
PHXDEMON
03-03-2009, 11:15 PM
lol
slothman86
03-03-2009, 11:17 PM
How to they hold up on corners, do they get pay reductions for dropping it? is there some sort of MicroKat union?
1NZYaris1
03-04-2009, 12:04 AM
How to they hold up on corners, do they get pay reductions for dropping it? is there some sort of MicroKat union?
:bellyroll: No pay here it's all done for love:wub: , slave labour :biggrin:
jeremyshay
03-04-2009, 01:32 AM
bahaha. c3po moved!
LtNoogie
03-04-2009, 01:50 AM
Wow, there's gonna need to be some serious velcro to keep their butts stuck to the dash. I can see them critters yelling "Whoaaaaa!" during an autocross session.
1NZYaris1
03-04-2009, 02:30 AM
Wow, there's gonna need to be some serious velcro to keep their butts stuck to the dash. I can see them critters yelling "Whoaaaaa!" during an autocross session.

You need to strap one too your S/C :thumbup:
1NZYaris1
03-05-2009, 12:54 AM
Okay i retired the MeerKats
and installed it above the mirror, what do you think.:wink:
yaris-me
03-05-2009, 11:58 AM
I like the MicroKats better.:thumbsup:
RagnaCaT
03-05-2009, 08:08 PM
NICE!
Benggolf2
03-05-2009, 10:47 PM
Neat location. Only issue is you have to take your eyes off the road completely with the Scangauge mounted above your rear view mirror.
*MAD DOG*
03-06-2009, 02:42 AM
That's where I have my reverse parking sensor screen located. It has a picture of how close I am to an object behind me and it also tells me how close I am in cm.

http://i208.photobucket.com/albums/bb65/MADDOGZONER/TonyYrx016.jpg

That location is good for reverse parking sensors or an e-tag, but I don't think it's a good location for a scangauge considering it has buttons and you'd have to reach high to press them.
1stToyota
04-08-2009, 10:17 AM
Okay i retired the MeerKats
and installed it above the mirror, what do you think.:wink:

Does that SGII mount work with the factory mirror, or does it only work with mirrors with round bases? I like the mount and the SGII, but not if I have to replace the mirror or stick it to the dash.
firebob
04-08-2009, 01:00 PM
I thought the scan gauge and GPS went in the glove box. When you get out of the car you close it and the people walking by do not know you have toys to steal.
1stToyota
04-08-2009, 01:34 PM
In that case I guess I'll be getting...

drive with glovebox closed (http://lib.store.yahoo.net/lib/auterra/RightProfileWithStand.jpg)
POORSHA
04-08-2009, 04:26 PM
Here is my sgII, not hard to do.
1NZYaris1
04-08-2009, 06:27 PM
Does that SGII mount work with the factory mirror, or does it only work with mirrors with round bases? I like the mount and the SGII, but not if I have to replace the mirror or stick it to the dash.

My Scanguage is just Velcroed to the roof , and because i had my front window replaced about 4 months ago , it now has a dark blue tint accross
the top of it , so the Scanguage cannot be seen from the outside of the car.:thumbup:
i was going to do the glove box method , but was wooried about the sun
on it.:respekt:
birdman
10-03-2009, 04:02 AM
That Scangauge in the glove box turned out real nice. Must have been a sweaty bear to do it.
IsLNdbOi
10-03-2009, 04:39 AM
The BlendMount looks cool:
http://store.nexternal.com/shared/StoreFront/product_detail.asp?RowID=101&CS=mgt&All=
driverofchuckles
08-04-2014, 01:54 PM
http://imgur.com/Wx06Ur6
http://imgur.com/I3nXtwY
http://imgur.com/MzU2jPw
http://imgur.com/s6BCOHq

these pics of the start of the mod.

eventually i'm going to put a double female ended ethernet port on the panel then fabricate a short double male ended cable and a holder for the unit itself. pretty proud of how this turned out. just waiting for time and money to finish it. oh, and a nice 3D printer too :smile: