Leather Shifter Boot

[1NZYaris1]

:drool:
I liked it so much , i had to buy one ,:drool:
i think it looks better than the factory one , darn sight cheaper too.

Confirmed price is $28.00US FREE :thumbup: shipping when ordered from myself for
New Zealand and Australia and South Pacific .
PM me your Paypal address and i will send you an invoice.

Garm will do America ,Canada Etc.

Diy INSTALL GUIDE on pg 4 :thumbsup:

[jinxor]

Nice boot mate... where did you buy it from??

[ruimond]

Is that the redline one, looks good.

[1NZYaris1]

Is that the redline one, looks good.

No it's not a RedLine , i will give you full details on where to buy ,
and off who in a day or so .
The cost is a lot better than RedLine, approx half the price .
and thats what i paid as a one off custom job.
so if you are interested keep watching and think about color and thread color you want.

[StefanVVTi]

WOW! That looks great!
I was getting used to the rubber boot...and now this!!:thumbup:

[Callisto]

Please, do tell!

[jinxor]

I am interested in the same design for my car... but with blue stitches....

[Kenshin]

Awesome look man, lovin the leather. Just wondering, did you cut your shifter shorter? Or has it been that short since you got it?

[1NZYaris1]

Okay guys sorry about the delay ,
still trying to confirm a price (hopefully around $28.00US ) , i paid $32.00US. inclusive of frieght .
I can also tell you for all those watching and interested all sales will go through MicroImage-Garm- cali yaris , as i am not a regestered Vendor on here ,
Also to help the south pacific sales IE frieght free i will be sending
south pacific sales from New Zealand .
so if you are interested please put up your hand and advise what thread color you would like .

Once priceing has been confirmed ,Garm will take confirmed orders with payment. :thumbup:

[1NZYaris1]

Awesome look man, lovin the leather. Just wondering, did you cut your shifter shorter? Or has it been that short since you got it?

My shifter is stock apart from a NST SSK-2 short shifter and S/S cage bushes.

I am interested in the same design for my car... but with blue stitches....
No problem can do .

Nice boot mate... where did you buy it from??
It was custom made by a friend who is proving hard to get a hold of :laugh:

[1NZYaris1]

Bump i need numbers and preffered colors before i can 100%
confirm pricing , but i can tell you it will be under $32.US shipped :thumbup:
how much under depends on final numbers . :thumbsup:

[1NZYaris1]

Leather boots are on there way ordered today should see them here in
10 day's
Black leather boot with RED , BLUE (royal) , BLACK , GREEN, LIGHTGREY, OR GOLD stitching
Take your pick .

[NJBob]

Nice, I'm tired of the rubber one that always gets full of dirt. :mad:

[Kenshin]

Can I put an request in for a gold one? :)

[1NZYaris1]

You Can , if you like .:thumbsup:

[josevenezolano]

I want one with blue stitching...

[dallas]

Whats the shift knob off of is it a Lexus? Looks nice.

[1NZYaris1]

Whats the shift knob off of is it a Lexus? Looks nice.
No it is Toyota Sport Knob , do you want it , its yours for $32.US
Camry , Rav4 , Corrola , Yaris

[goku87]

Sweeeet. I want one with red!

[1NZYaris1]

Noted and PM'ed :thumbsup:

[Alcott83]

do you have a site took look some other boots i need a new one.. and does anyone know where i can the ring that holds the boot down mine broke??

[1NZYaris1]

do you have a site took look some other boots i need a new one.. and does anyone know where i can the ring that holds the boot down mine broke??

Garm will be putting them on his site when they arrive , and have you tried supa glue on the retainning ring ,it is only plastic. :thumbsup:

[cali yaris]

LOL @ "supa glue"

[1NZYaris1]

LOL @ "supa glue"

One drop holds a ton , according to the TV add's :iono: :tongue: :laugh:

[jinxor]

so you have glued the boot to the stand??

I thought you have to stitch it in....
Not sure what is the best way tho :iono:

[1NZYaris1]

so you have glued the boot to the stand??

I thought you have to stitch it in....
Not sure what is the best way tho :iono:

No and no and no , Wait and see they are not far away now , :drool: :laugh: :laugh:

[kustom play]

so will these come in custom colors

i could go for a black one with pink stitching!

[1NZYaris1]

They can , but will need to be ordered the next order,and a new order won't happen until exsisting stock has arrived and started to sell. :thumbsup:
+ we are awaiting a prototype hand brake boot , which is still 6-8weeks away.


:burnrubber:

[kustom play]

They can , but will need to be ordered the next order,and a new order won't happen until exsisting stock has arrived and started to sell. :thumbsup:
+ we are awaiting a prototype hand brake boot , which is still 6-8weeks away.


:burnrubber:

that kinda sucks

it means i could be waiting forever and a day

if they did custom order right away that would be a lot better

[goku87]

They can , but will need to be ordered the next order,and a new order won't happen until exsisting stock has arrived and started to sell. :thumbsup:
+ we are awaiting a prototype hand brake boot , which is still 6-8weeks away.


:burnrubber:

oh SNAP! I know what I'm buying in 6-8 weeks! Red stitch plz. Just for future reference.:cool:

[jinxor]

yeah.. the e-brake boot sounds nice... ill call dibs for it tooo
Blue stitch FTW!!!!

[spookz]

The 09 Yaris' have their factory shift boot stapled into the trim ring. There's another option for you fellas =P

[kustom play]

i wanted a black boot with pink stitching to match my new wheel

[1NZYaris1]

The 09 Yaris' have their factory shift boot stapled into the trim ring. There's another option for you fellas =P

The 06-08 boot is held in the same way as the rubber boots .
whats your piont :iono:

[JBougie]

I want one with blue stitching!!

[spookz]

The 06-08 boot is held in the same way as the rubber boots .
whats your piont :iono:

Oh is it, my bad then. I've never examined the 06-08 rubber boots. So I have no idea how that was secured to the trim ring. Now I know it's the same, thanks. LOL.

[goku87]

You know 1NZYaris1, it seems like you might want to hurry up. There are obviously a lot of potential buyers!! :D

[1NZYaris1]

:rolleyes: Rome was not built in a day, but just so everyone is informed , and
this is not an excuse, the person making these for us is doing his best ,
he is currently spending most day's in hospital with his mother , who
has just been diagnoised with cancer .
He has also said that he was hoping to have these in the post to me
today or Tommorrow,
As for the hand brake boot he has not even started on this yet , but
given the 6-8 week time frame i was given , i now understand why .
Please be Patient, and Kustom play i have ask him if the boots are still
there can he send yours at the same time , but as yet have not reiceved a reply to this request sorry.
One last thing to remember is i am doing this with the help of Garm and the last thing i want
to do is upset or piss anyone off including Garm . Cheers

[kustom play]

i found a guy online already who can make me a custom one right away

sorry to hear about your friend though, i too had cancer and got through it

its a tough crappy road, but staying positive helps

[1NZYaris1]

i found a guy online already who can make me a custom one right away

sorry to hear about your friend though, i too had cancer and got through it

its a tough crappy road, but staying positive helps

So you don't want the one that i just ordered ,

[kustom play]

no im all set already

i already went with the other guy,

[1NZYaris1]

No Problem , Garm can have it for his Yaris :biggrin:

[JBougie]

I am in no rush - the Yaris isn't going anywhere. lol

So, I'll be here whenever they come in!

[1NZYaris1]

bump :
watch this space
Boots are here. :thumbup:

Including ONE pink stitched one

[jinxor]

:needpics:

[1NZYaris1]

:needpics:

:bellyroll: HMMMMM :bellyroll:
okay you win , still waiting to see where your SSK-2 though

[jinxor]

really nice... looks clean

[1NZYaris1]

Yes they are , and yours will be in the mail soon , Thank you :thumbsup:

[1NZYaris1]

Confirmed price is $28.US Shipped any where in Australia ,New Zealand.
PM me to place your order, payment via Paypal.

[NJBob]

YES! I'm down for a Blue Stitchy. I'll complete the transaction tonight. :thumbsup:

[1NZYaris1]

You won't be disapointed, these are a great mod for the car.:thumbsup:

[1NZYaris1]

Garm ,have you recieved yours yet , i think i may have ended up with your :barf: Pink Stitched Boot :laugh: , can i send it to you ,please. :thumbup:

[rningonfumes]

Nice!...Do I smell a DIY write up??

[1NZYaris1]

Very simple to do but if one is required then i guess so . :laugh:

[cali yaris]

Mine came in too! .. and I also got a pink one. Putting them up into my store right now.

Also $28 shipped anywhere in USA.

Here you go guys:
http://www.shop.microimageonline.com/product.sc?categoryId=13&productId=123

[1NZYaris1]

Nice and simple DIY Install Shift Boot .

Step 1: Remove gear Knob

Step 2: Pull the rubber shift boot upwards , while gently prying up
plastic surround.

Step3: Remove rubber shift boot from surround .

Step 4: Clip Leather shift boot into place , as per photo. onto plastic
surround

Step5: Place shift boot and surrond over gear lever and clip into place.

Step6: replace gear knob

Step7; finish and take photo's to put up here.

[Grandieri]

Thanks guys! Cant wait to replace the ugly rubber.

[NJBob]

Dittos...I just ordered mine tonight. Thanks Garm and 1NZYaris1. COOL! :thumbsup:

[the_boss]

i should order one... I have to remove the rubber one every 2 weeks to clean out the dirt:frown:

[1NZYaris1]

i should order one... I have to remove the rubber one every 2 weeks to clean out the dirt:frown:

Do it you won't regret it at all :biggrin: :thumbup:

[edmcc]

Ordered mine earlier today. :thumbup:

[1NZYaris1]

Can't wait to see pictures , of the different color's installed :clap:

[Shappers]

That looks amazing, think I might have to place an order...!

[1NZYaris1]

That looks amazing, think I might have to place an order...!

You can PM , Garm or Myself , look forward to your order.:thumbsup:

[ruimond]

That looks like a very simple DIY, i was thinking you would have to remove the centre panel,etc. Still deciding if i want to get one. Ha. :laugh:

[1NZYaris1]

That looks like a very simple DIY, i was thinking you would have to remove the centre panel,etc. Still deciding if i want to get one. Ha. :laugh:

No the plastic surround unclips , and the rest is very straight forward from there . :thumbsup:

[the_boss]

Do it you won't regret it at all :biggrin: :thumbup:

yea i know! but for now i have to stay at the hotel for 2 weeks and i kinda have some other stuff on my mind but as soon as I get back in my house ill definitly look at this more seriously!

[1NZYaris1]

yea i know! but for now i have to stay at the hotel for 2 weeks and i kinda have some other stuff on my mind but as soon as I get back in my house ill definitly look at this more seriously!

Your good , they will be here when you want one , Garm has them listed
http://www.shop.microimageonline.com/product.sc?categoryId=13&productId=123
in his online store. :thumbsup:

[A-tron]

Totaly ordering one when I get home. Such a simple and clean upgrade. And so hot.

[WeeYari]

These are nice. Wish mine was a M/T just so I could order a shift boot :(

[Shappers]

Have just ordered mine in Red! Awesome!

[A-tron]

Ordered and eagerly awaiting its arival. woot

[1NZYaris1]

:drool: LAST CHANCE FOR ANYONE IN AUSTRALIA , NEW ZEALAND INTERESTED IN
BUYING ONE OF THESE BOOTS TO DO SO FREIGHT FREE , FOR $28.00US
You have until Friday (10/04/09) afternoon to PM or Email me .
After this you will neeed to place all orders through Garm, and Postage will
be charged $11.00US Approx (final postage cost's will be confirmed by Garm at time of order. :thumbup:

[NJBob]

Mine is shipped! :smile: I'll prolly see it Monday...depending on the post office....maybe Friday if I'm lucky. I will post pics.

[1NZYaris1]

Bump , Any takers in AUSTRALIA

[1NZYaris1]

Just a teaser , here's my new Gear Knob to go with my new Shift Boot ,
Thanks Garm :thumbup:

I need to make a little spacer to lift the boot , but apart from that ,
it's bloody nice.

[jinxor]

That looks great!!! And they are complimenting each other as well... nice setup Ray

[NJBob]

Here's my lone pic. .... too much contrast light right now but I was so jazzed to get it and install it right NOW, I just snapped a shot real quick. Me likey!
http://www.yarisworld.com/forums/images/funkygarage/860/Boot.jpg

[33OH]

Those look really nice.

Might I suggest adding a bit of leather/upholstery glue to the edges?

[1NZYaris1]

Here you go spacer made and fitted

[1NZYaris1]

Still got a couple left, anyone want one.

[goku87]

Those look really nice.

Might I suggest adding a bit of leather/upholstery glue to the edges?

http://www.yarisworld.com/forums/images/funkygarage/849/IMG00497.jpg

hey! how did you get your shift stick so short???

[schleppy]

As a side note, I'm currently trying to put a suede shift boot in my 09 LB, and the shifter trim ring is totally different from the ones pictured here. The material has to be a lot thinner to pass over the ring, then sandwich between the ring and the center console. The snaps on the ring itself are also much smaller, and fewer in number. Be warned!

I'll post pics if I can.

[AznGouki]

Oh man I dunno how I missed out on this. Free shipping to canada perhaps? Interested in black stitching.

Rich

[1NZYaris1]

As a side note, I'm currently trying to put a suede shift boot in my 09 LB, and the shifter trim ring is totally different from the ones pictured here. The material has to be a lot thinner to pass over the ring, then sandwich between the ring and the center console. The snaps on the ring itself are also much smaller, and fewer in number. Be warned!

I'll post pics if I can.

The 09 boots are viynal , and stapled to the ring , if i remember correctly .
you can find and purchase the 08 ring it will fit.

[schleppy]

The 09 boots are viynal , and stapled to the ring , if i remember correctly .
you can find and purchase the 08 ring it will fit.

Excellent info, thanks! You wouldn't happen to have that part number would you?

[1NZYaris1]

Excellent info, thanks! You wouldn't happen to have that part number would you?

No sorry i don't but if you PM Tim at TRD Sparks he will help you out .

[A-tron]

Word. I still havn't used any fabric glue on it yet. But still, this thing is nice. I totaly recomend getting one.
21593

[1NZYaris1]

Thank you for the photo, looks good . :drool:
anyone elsewant one

[NJBob]

Now my gearshift knob looks cheasy. I'm off to Pep Boys to find some inexpensive replacement.

[Shappers]

jsut fitted mine... theres quite alot of excess under where the tabs connect, so think I'm going to need to trim it slightly to make it fit.

apart from that, am very impressed with the way it looks!

[cali yaris]

NJ Bob, check out our shift knobs before you give your money to Pep Boys! :thumbsup:

The boots look really good everyone! Can I use the pictures?

[33OH]

hey! how did you get your shift stick so short???

I cut it 3.25" with a grinder.

[1NZYaris1]

NJ Bob, check out our shift knobs before you give your money to Pep Boys! :thumbsup:

The boots look really good everyone! Can I use the pictures?

You can use mine, ahhh you already have:laugh: :thumbup:

[NJBob]

NJ Bob, check out our shift knobs before you give your money to Pep Boys! :thumbsup:

The boots look really good everyone! Can I use the pictures?

Can't see spending too much for a knob. I do like this one though.

http://us.st12.yimg.com/us.st.yimg.com/I/brandsportinc_2050_480984649

[A-tron]

Lol I hear you their. The boot looks rad. But now I'm in the same boat with the knob.

[goku87]

I cut it 3.25" with a grinder.

Neato. Did you re-thread the shaft or just leave it as it was?

[1NZYaris1]

Okay , Back to shift boots , :rolleyes:

[1NZYaris1]

Jinxor , have you got your's yet. :rolleyes:

[33OH]

Neato. Did you re-thread the shaft or just leave it as it was?

Just left it. I drilled my stock shift knob out to fit, and hammered it onto the shaft. It's a very snug fit. :smile:

[1NZYaris1]

Just left it. I drilled my stock shift knob out to fit, and hammered it onto the shaft. It's a very snug fit. :smile:

thats a bit harsh , what happens when it's time for a change.:laugh:

[1NZYaris1]

here you go the second to last peice of the centre consol. :biggrin:

For got to add this sit's over the orginal rubber boot .

[jinxor]

oh... nice product... how much mate?

Next mod... CF centre console like garms... hehe

[cali yaris]

^ :wink:

[1NZYaris1]

oh... nice product... how much mate?

Next mod... CF centre console like garms... hehe

:eek: I didn't know Garm had a C/F consol, i must have missed that one :drool:

[33OH]

thats a bit harsh , what happens when it's time for a change.:laugh:

I made a custom spacer that fits over the knob and has the stock toyota threads on it.

Or, I can just use the universal allen screw ones.

But either way, I'm set.

I have a thread about it all here: http://www.yarisworld.com/forums/showthread.php?t=13901

[1NZYaris1]

The Blue stitched Handbrake Boot is up for sale if anyone wants it.
Pm me if interested :thumbsup:

[Yarisaur]

I ordered a shift boot and e brake boot from garm and im having trouble getting the shift boot to fit on properly, by the way i have a sedan, i thing it might have been only designed for the lift-back because mine dose not have the trim ring shown in the install, just the piece of the center console that the factory boot hooks on to.. dose anyone have a sedan with these installed i need help.?

[Roby86]

I have ordered mine, and here is the result, it seems ok.

Unfortunately there are no predefined holes for the plastic pins on the plastic cover, so I had to make mine by few sharp objects.. :-)

https://dl.dropboxusercontent.com/u/11820215/20130805_202137_LLS.jpg
https://dl.dropboxusercontent.com/u/11820215/20130805_202156_LLS.jpg

[RSYaris2008]

I like the leather boot, I'm getting one once I find it.

[jcboy]

you can actually use the same boot that you have, just do a similar stitching AND red stitching. that is if you have the leather boot and not the rubber thing.

[IllusionX]

you can actually use the same boot that you have, just do a similar stitching AND red stitching. that is if you have the leather boot and not the rubber thing.

the hatchback all came with a rubber boot afaik.

[jcboy]

the hatchback all came with a rubber boot afaik.

oh ok. here's what i did with mine. sort of DIY, but with the assistance of a tailor who has a heavy duty sewing machine.

http://i92.photobucket.com/albums/l15/boodis/Gusot/IMAG1554_zpsb792514e.jpg

[Kar98]

Step 4: Clip Leather shift boot into place , as per photo. onto plastic
surround


http://i.imgur.com/To6XWNE.jpg

Did you make any cuts into the shift boot for the clips, or am I too stupid? :iono: