MY GTI Front bumper plus WICKED turn signals..

[marcus]

finally got it done.. videos and photos on this gti front and of course my idea of led turn signal.. love the front and even more love my aggressive led turn signal, it lets other people on the road know IM CHANGING LANE! specially at night..

PRM INTAKE on the go just need to wait till toyota is done with my issue...


VIDEO LINK! http://www.youtube.com/watch?v=2GSCcySjSjU&eurl=http://www.youtube.com/my_videos_edit2?ns=1&video_id=2GSCcySjSjU&next=%2Fmy_videos2%3Fpi%3D0%26ps%3D20iurl=http://i3.ytimg.com/vi/2GSCcySjSjU/hqdefault.jpg

and i know there is imperfection on the lines.. itll be fix..its actually not done im running a black lining on this right after..

[marcus]

kinna just notice that prm intake matches the color of the gti front..its match made in heaven..

[WeeYari]

PRM intake +1.

Didn't know you were going for it marcus. Let me know what you think. We'll compare notes. Can't wait to hear what the opinion is on an M/T Yaris.

[Meteorite_Marty]

I want to do the same to the front of my car. Did you use vinyl? How did you do it?

[Adriaan]

Looks good! Did you do it yourself? How you have to paint the hood deflector to match the car paint.

[Kaotic Lazagna]

Nice. How much was that intake, btw?

On another note, those LED's are sick, but they'd scare the bejebus out of me if you were to start signalling next to me at night; I'd first think that a cop was trying to pull me over. lol.

[marcus]

PRM intake +1.

Didn't know you were going for it marcus. Let me know what you think. We'll compare notes. Can't wait to hear what the opinion is on an M/T Yaris.

no i just caved and bought it...setup look good..im just having a little small issue with the car toyota ordered parts for it but till then i cant put it on..soon enuff.


I want to do the same to the front of my car. Did you use vinyl? How did you do it?

i used primer and then bumper paint..right now its a little wet..


Looks good! Did you do it yourself? How you have to paint the hood deflector to match the car paint.

yup just 2 hours ago.....and i havent put the intake on .. i cant wait have to keep myself busy..


check out the video guys..

[WeeYari]

BTW marcus, you'll forever be known as the guy who stole my one-of-a-kind status. :wink:

[marcus]

BTW marcus, you'll forever be known as the guy who stole my one-of-a-kind status. :wink:

well we dont want that.. if ur talkin about the prm.. then i call 2nd...lolz.. by the way gerry did explain quite a few intake setup he had..very interesting..
plus i forgot to tell him the he does look like JOSH GROBAN... if you know that singer..its funny how he resemble him..thought hes gonna sing opera at one point...;lolz. nice guy btw..

[PETERPOOP]

blue turn singal LED bar? you're crazy. Got any pics of what it looks like in the day time and where it's mounted.

[marcus]

blue turn singal LED bar? you're crazy. Got any pics of what it looks like in the day time and where it's mounted.

its actually pure white.. the vids made it look blue.. and its still very noticeable on day time..

[Kaotic Lazagna]

its actually pure white.. the vids made it look blue.. and its still very noticeable on day time..

In that case, I retract my previous cop statement. lol.

[cali yaris]

daytime pics, please!

[Minne_Yaris]

\

On another note, those LED's are sick, but they'd scare the bejebus out of me if you were to start signalling next to me at night; I'd first think that a cop was trying to pull me over. lol.

hahah i was thinking the same thing when i first saw it..... :headbang:

[yarisugi]

Turn signal lights on window sill not legal I assume?

[marcus]

Turn signal lights on window sill not legal I assume?

i dont know what reason a cop will tell me about it not being legal.. i say its actually very noticeable at night which is the main point of a turn signal other driver will see instantly.. we shall see..

[marcus]

DAYTIME SHOT COMING SOON>> the paint should be flat black but it was still wet when i took the picture..

[marcus]

update.. the front now look black flat..which is what i wanted.. looks great but not done im adding dimension on it this weekend..

[thebarber]

don't like it at all....sorry.....imo, its never worked on the yaris bumpers for me

and id lose the RS badge on the hood deflector

[marcus]

don't like it at all....sorry.....imo, its never worked on the yaris bumpers for me

and id lose the RS badge on the hood deflector

well i dont like that shot either but it make big difference in person upclose.. and the rs emblem stays..lolz.

[PETERPOOP]

Since your car is so stock, it's hard to make it work. However, once you get the thing slammed and have some either gunmetal or black wheels, new headlights, microimage's black mesh grill, and get rid of the hood deflector, it should look great!

[KCALB SIRAY]

great job

[ChinoCharles]

It looks better on a JDM RS bumper because that center section has borders rather than blending with the rest of the face, but this doesn't look bad. I think it convinced me not to do it though. :iono:

Marcus, if you're happy RAWK THAT THANG. Looks good.

[marcus]

yup rims on the way., next month..although im already running trd springs on them ....nothing fancy..dont want to rice it up...although i may have started that with the emblems and this gti front.. we shall see..

[PETERPOOP]

OMG, did you just imply that dropping the thing lower is considered "ricing it up." And you adding emblems and a "gti front" is ricing it up? lol. You need a different mindset please!

[marcus]

OMG, did you just imply that dropping the thing lower is considered "ricing it up." And you adding emblems and a "gti front" is ricing it up? lol. You need a different mindset please!

not the dropping part..i wanted to go lower as well .. i guess the blackened front is ok..im actually happy with it again its not done. although the rs emblem kinna worries me..the thing is i actually do have an rs..but it may be too much to have it 2x on the front..now im stress...

oh congrats on the blitz installation..and the vids..

[YarisSedan]

I remember seeing a post another made awile back that looked really good. He used some sort of black vinyle and did just the center portion. What you did is the center plus extended to the sides a bit and up to the top of the grill. Which makes it look obviousely painted and not from the factory that way. What kind of prep work did you do before painting? Any sanding or atleast wash away with dish soap to strip any wax. Otherwise you are going to have wicked orange peel or atleast peeling of the paint in the near future. It looks decent from far away. But up close i would like to see more pics. To me vinyl would have been the way to go that way if you change your mind later its not permanent. =)

[marcus]

I remember seeing a post another made awile back that looked really good. He used some sort of black vinyle and did just the center portion. What you did is the center plus extended to the sides a bit and up to the top of the grill. Which makes it look obviousely painted and not from the factory that way. What kind of prep work did you do before painting? Any sanding or atleast wash away with dish soap to strip any wax. Otherwise you are going to have wicked orange peel or atleast peeling of the paint in the near future. It looks decent from far away. But up close i would like to see more pics. To me vinyl would have been the way to go that way if you change your mind later its not permanent. =)

thats why im adding another dimension to it.. i got to delete this photos ...most people didnt like it ill repost once im done.. i did sand it with 200 grit then 600 then 800.. 3x prime plus 2x bumper paint..

[marcus]

deleted photos and no more photos till im done..lolz..

[marcus]

Nice. How much was that intake, btw?

On another note, those LED's are sick, but they'd scare the bejebus out of me if you were to start signalling next to me at night; I'd first think that a cop was trying to pull me over. lol.

sorry missed ur post.. intake is being sold for $200 canadian pick up or $200 usd shipped.. itll be a group buy though..i believe its $250-260 regular price.

and yah i do turn head on them turn lights.. so far no issues.. i just dont use it if theres cops around just incase but day time is ok still noticeable but not as bright.

[Kaotic Lazagna]

sorry missed ur post.. intake is being sold for $200 canadian pick up or $200 usd shipped.. itll be a group buy though..i believe its $250-260 regular price.

and yah i do turn head on them turn lights.. so far no issues.. i just dont use it if theres cops around just incase but day time is ok still noticeable but not as bright.


It's all good. That's cool, I think you're the only person that I know that has that intake.

[WeeYari]

It's all good. That's cool, I think you're the only person that I know that has that intake.

I have the prototype that's been on since last November.

[marcus]

prm intake going in today.. this afternoon.. i cant wait. gonna clean the engine bay b4 i put it on and review will follow..stay tuned..

[marcus]

ok done...heres the prm intake link..

http://www.yarisworld.com/forums/showthread.php?p=275707#post275707