Painted (red) my headlights trim....+ Tutorial

[hasher22]

Hey guys i just updated my headlights. NOW ITS WITH RED!!! LOL! (P.S its illigal to paint it black or red or any other colour in australia.....but i see so many cars with black headlights....)

Phase 1 (Stocked)

http://img221.imageshack.us/img221/2023/p7190718ny4.jpg


Phase 2 (Added black)

http://img218.imageshack.us/img218/5258/p7190731nh9.jpg


Phase 3 (Added RED!)

http://img218.imageshack.us/img218/2403/p7260742ei9.jpg

Plz tell me if you think its hot or not!!.....personally i love it!! (Not becuz its done by me, cuz the colours looks soooo good.....lol)













TUTORIAL
As seen from the last thread
Items i used
- Phillips screw driver (the + head one)
- Black "Power Plus Spray Brush" Spray Paint 150g
(you might want to get a bigger size if your are painting the majority of the headlights)
- Maskin tape


1- Start by opening your hood (DUH)
2- You will see these little black pivet thingy's....you need to take all of them out. To get them out push the little circle in the middle of the black things and push them up. to get them back in again do the opposite.

http://img207.imageshack.us/img207/4325/p7190715es5.jpg

http://img95.imageshack.us/img95/5933/p7190716ob5.jpg

3- There will be some on the side of the bumper next to the wheels so u can get them out too.
4-Next thing up - look under the car, there will be screws there. Take them out with a PHILLIPS screwdriver.
5 - Now your ready to take off the bumper. (As for me i didnt take it off, i just pulled it off half way, while half of it was still attached to the car) To take off the bumper you need to put a bit of pulling force. 1st of all PULL each side of the bumper with a bit of force (dont worry i wont snap or bend the bumper)
http://img95.imageshack.us/img95/3116/p7190718iw0.jpg
6- now its time to remove the lights.........first of all there are 3 screws that are holding the lights in place. Get them out!!!

http://img95.imageshack.us/img95/6128/p7190719vt4.jpg

http://img95.imageshack.us/img95/4531/p7190720hq8.jpg

http://img207.imageshack.us/img207/1655/p7190721po2.jpg

7-Now take off the head lights and of course the wires are connected to it.

http://img95.imageshack.us/img95/9860/p7190723td2.jpg

8-Now thats done, do it to the other one!!! when both headlights are off, shut the hood, lock up ur car and get those things into your OVEN!...lol

(SORRY NO PICS FOR THIS SECTION!!)
9-Ok put your headlights into the oven and set it to 250 - 300 Degrees (I put mine on 250. 250 is enough). Leave it in there for about 5 mins!! DONT LEAVE IT FOR 5 MINS STRAIGHT!!! KEEP CHECKING IT SO IT DOESNT MELT!!
10- The gooey REALLY STICKY glue should all be LOOSENED up, so take it out of the oven and GET A BUTTER KNIFE and try to seperate it with the butter knife!!! (if your doin it with ur hands it will be harder, i suggest get a butter knife and stick it between the black and the clear plastic and bend the knife upwards so it will pop out!!)
11 - once its sperated it will look like this (thats just the gooey glue)

http://img207.imageshack.us/img207/3304/p7190729ik8.jpg

12- Now get the parts you wanna SPRAY paint. go outside and spray IT! if you are paintin it black, have about 3-5 coats on. AND REMEMBER NOT TO SPRAY TOO CLOSE, becuz there will be dry drip marks on it. you dont want that. it doesnt matter if there are unfinished patches in your 1st - 2nd coat. the 3rd - 5th coat will cover it all up! and it will look great! With every coat leave it in the sun to dry for about 10 mins then go to ur 2nd coat and so on.

Oh yea you might wanna cover the spaces u dont want to spray black, red, blue whatever colour with good masking tape.

12 - once everything is painted and your happy PUT IT ALL BACK TOGETHER :)

http://img95.imageshack.us/img95/1593/p7190730we4.jpg
(ive just painted the top bit....thats all i wanted done...)

13- now go back to ur car, put in the headlights, attach the bumper, and put in the little black plastic thingys and the screws back in.

THERE U GO!! WALLA!! you now have sexy black head lights....
http://img246.imageshack.us/img246/4505/p7190731ve6.jpg

[johnnyfive]

that looks hot as hell :)

dont really think they will give you problems for painting the non reflective/light emitting parts of your head lights

ohh, did i mention...that is freaking HOT!!


looks real good with the red, would look real nice with a blue also, not sure about flint mica though ;) so i will live vicariously through your hot headlights :)

[riceboy]

not really a big fan of the black.. i'd rather see the whole thing done in red....

but:respekt: for doing something different..

[paultyler_82]

Wow, I think the red/black really sets it apart, looking good!

[Katana]

Nice work there.

[Violin]

Looks really good! Nice tutorial too.

[oscarying]

SO HOT MAN

[Chris07LB]

Liked your original setup better..

[ChinoCharles]

Yeah, not a huge fan of all the colors on the headlight, but you were clean about it and you like it, so kudos! Great work.

[Chris07LB]

Here's a clearer pic for removing those push in plastic rivits.... Use it if you wish in your How-To. :thumbsup:

[Yaris Yaba]

Great work!

[xfatefailsx07]

looks nice and clean.. good work.. u must be a pro at removing the lights now..haha nice job:thumbup:

[nick1983]

I really like it. Looks alot better that way

[sroberts]

What did you do to get the lens back on? Did you have to reglue it? Or did you just use the same glue?

[hasher22]

What did you do to get the lens back on? Did you have to reglue it? Or did you just use the same glue?

i used the same glue........

[Centurion2200]

for putting all back together..... i know u used the same glue....but you have to put it on the oven again for the glue to get hot an fill the space nice?....


i dont want water coming inside my headlight.... :)

[vodkalush]

I threw mine in the oven for a min or 2 then repressed it back together, I;ve been checking the light housing every time it rains/dew all over, no signs of leaking.

[KSIbucky]

what color would you do if you have a silver car
not silver because then i'd just leave it stock

[hasher22]

what color would you do if you have a silver car
not silver because then i'd just leave it stock

Black.......Thats all i can think of for a silver car, unless u want silver paint to match ur car instead of chrome.

Though i wanna see Dark green headlights with the silver...that would look unique then again i guess u have to have the same colour interior and some green decals......


But my opinion - Black

[Black Yaris]

Has anyone knocked out their orange reflector in their U.S. spec headlights yet? I plan on smoking my headlights in a similar fashion shown in this thread, so I can retain the look my HID lamps

[hasher22]

Has anyone knocked out their orange reflector in their U.S. spec headlights yet? I plan on smoking my headlights in a similar fashion shown in this thread, so I can retain the look my HID lamps

What do u mean by smoking? Becuz most people get confused with the term "smoking".

Or you want to paint them?? As with the orange reflectors u americans have, if u wanna get rid of that....simple paint over it.

[Black Yaris]

smoking or tinting is a translucent black paint. it will make my headlamps look like black chrome, so it will stay reflective so I can stil see the road at night.

[hasher22]

Well i used "Night Shades" for my tail lights, but it came out matt, u might want to get some clear gloss paint.

Though im just thinking if the chrome will be black chrome if u know what i mean if u apply some the smoke spray.

Theres always tints u can buy......cut it to size and stick it on

[vodkalush]

Has anyone knocked out their orange reflector in their U.S. spec headlights yet? I plan on smoking my headlights in a similar fashion shown in this thread, so I can retain the look my HID lamps

when you open up the headlight housing you can simply remove the orange reflector.

[TRD_Yaris]

VERY NICE! though, it may look cool if you reversed the Red and Black painted areas on the headlights.

[hasher22]

TRD Yaris

http://www.yarisworld.com/forums/showthread.php?t=892

thats what this guy did......but his one is blue

[window_lee]

it looks very good
i think if u try smoke for the black part will look much better
cause i am thinking to do it

IT IS VERY NICE LOL

[TsYaris]

do your lights ever fog up because its been opened?

[Betrivent]

Holy thread necro. 8 years.

[xalpha322]

shame the pics dont work anymore :iono: