Work Emotion XD9's (will they fit?)

[kid chino]

I found these, can anyone tell me if the fitment will be ok on my car. I drive an 09 LB dropped on TRD springs 1.2 front and back. Thanks.

http://cgi.ebay.com/ebaymotors/17X7-5-Work-Emotion-XD9-wheels-w-BS-Potenza-RE750_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1171Q7c66Q3 a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293 Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZit em320352490360QQitemZ320352490360QQptZMotorsQ5fCar Q5fTruckQ5fPartsQ5fAccessories

[kid chino]

30 views and 0 replies!? please help if you have any experience with wheel fitment. My concern about them is the width (7.5) and the offset (50mm)

[ChinoCharles]

They won't fit.

[kid chino]

Thanks...can you elaborate. What kind of size would sit flush and not give me any rubbing issues? (17x7) w/ 40mm offset?

[Benggolf2]

Thanks...can you elaborate. What kind of size would sit flush and not give me any rubbing issues? (17x7) w/ 40mm offset?

Yes, am running 17 x 7 +40mm offset with 205/40 x 17 tires..... No rubbing
issues at all. In fact I am running with an H&R 10mm spacer on the rear wheels. :thumbsup:
Check "My Garage" for photos.

[White Yaris]

the size would fit. But offset 50+... im not too sure on that. I hope theres enough clearance for brake caliper.

[Thirty-Nine]

Well, I believe the stock 16s in Japan are a +50 (where's Kimona?). However, a 7.5"-wide wheel is a bit much for the Yaris IMHO, especially if you don't plan on running some negative camber or roll the fenders (or both).

[kimona]

OEM: 17x6.5, ET51, 205/45/17

You want to go with 17x7.5, ET50, 205/40/17.

Check here for clearance: http://www.rims-n-tires.com/rt_specs.jsp

[kid chino]

thanks for all your help guys