Group Buy - True Double Din Radio Trim for Liftbacks (180mm opening)

[CTScott]

Last Call: I am going to place the order, so midnight EST tonight (4/1) will be your last change to hop on. Again, I won't require payment until I have them in my hands and am ready to forward them on to you...



Thanks to the help of one of our members from Denmark, I have finally tracked down the illusive radio trim piece, which Toyota uses with the TNS400 Navigation Head Unit (the one with the removable TomTom GPS). I will be importing the parts from Denmark, then will ship them to interested parties on this side of the pond.

Update on pricing:
Picked up locally in Southbury, CT: $45 each
Including shipping to anywhere in the Continental US: $50 each
Including shipping to Alaska, Hawaii, or Canada: $55 each



This trim piece shown below has the proper sized opening (180mm vs the 200mm in the standard radio trim). This will allow mounting of a double DIN head unit without having to use the Metra-type plastic trim pieces, for a much cleaner look.

If you are interested, please let me know ASAP, as I'd like to get the order in very soon.

I will update this thread with final pricing and the list of interested people:

1. CTScott -Installed - No Mod (Eclipse AVN2210p)
2. yrsdrgn
3. pariahdecss - Installed - Mod (Kenwood DNX 7120)
4. WolfWings - Shipped
5. IsLNdbOi - Received - Mod (Pioneer FH-P8000BT)
6. Keesue
7. cruz-gsr -Shipped
8. goku87 -Shipped
9. WeeYari - Received - Mod (JVC KW-XG700)
10. gmodder - Shipped
11. Hwnstyle21
12. Adriaan -Shipped
13. Saggio -Shipped
14. Grandieri - Shipped
15. anubisx99 - Shipped
16. kxsails - Shipped
17. fuji - Shipped
18. JMT529 - Shipped
19. Syroyizhka
20. njiteb - Received (waiting for 1DIN pocket)
21. JosephDoc - Installed - Mod (Kenwood-8120)
22. gwasabi - Shipped
23. MGargano - Received - Mod (Pioneer AVH-P4000DVD)
24. ozmdd
25. Taiyaki - Installed - No Mod (Alpine IVA-W205)

Here is a picture of the actual piece from Denmark:
http://i372.photobucket.com/albums/oo163/ctscott329/Misc%20Yaris/DDTrimPiece.jpg

Here is the picture that I put together a few months ago to show the difference:
http://i372.photobucket.com/albums/oo163/ctscott329/RadioBezelComparison.jpg

[detroiter]

Can we U.S. owners actually install a radio like that first pic?? And if so, is it a straight plug in and it works or must modifications be done?

[Doc Zaius]

Is it possible to get the gloss black that the RS's have?

[CTScott]

Can we U.S. owners actually install a radio like that first pic?? And if so, is it a straight plug in and it works or must modifications be done?

That's the purpose of this part - To allow a normal double DIN radio to be installed without having the plastic fillers between the radio and the silver trim. So, any double DIN install will look as nice as the picture.

[pariahdecss]

Awesome - - thanks for the effort in finding these

[CTScott]

Is it possible to get the gloss black that the RS's have?

To the best of my knowledge the part only comes in Silver. Spray paint is always an option...

[WolfWings]

I'm in like Flynn!

[IsLNdbOi]

If you'll be taking payments via PayPal, then add me to the list!

[CTScott]

If you'll be taking payments via PayPal, then add me to the list!

Paypal for sure.

Thanks to my wife's business I will also be able to take credit cards for the non-paypal people...

[Danish Yaris]

Hi

If anyones interested I can get the TNS400 too.
I can check if you can get it in black, but then the price would probably be about 5 times as much.
These are made for the TNS400 and that´s why they are cheap.

Regards Steven.

[IsLNdbOi]

What's a TNS400?

[CTScott]

The TNS400 is the Toyota version of the Eclipse AVN2210p navigation head unit (it includes the HU and the plastic trim piece as a kit). It is what is pictured on the top of this post.

By the way, Danish Yaris is my source for these. I figured that to keep the cost down for those of us on this side of the Atlantic that I would order as many as possible, shipped directly to me, and then I will reship to the individuals over here.

For anyone on the other side of the Atlantic, I would suggest going directly through Danish Yaris, as shipping will obviously be much more reasonable.

[Danish Yaris]

Hi

Yes, if anybody in the East want this radiopanel or something else European only parts/accessories just PM me or write here. I could probably ship some other parts together with the radiopanels, if it´s ok with Scott, if someone wants other parts too.

Regards Steven.

[cruz-gsr]

hi
if you can install any regular double dim radio like a pioneer nav, i want one

[devinlamothe]

Hey, mark me down for one of these babies!!!

[goku87]

Paypal for sure.

Thanks to my wife's business I will also be able to take credit cards for the non-paypal people...

Oh snap. In that case +1 via credit card. :thumbsup:

[WeeYari]

I'm in!

[SilverBack]

Nice! I like it how the kit isn't just 2 spacers

[Saggio]

Hi

Yes, if anybody in the East want this radiopanel or something else European only parts/accessories just PM me or write here. I could probably ship some other parts together with the radiopanels, if it´s ok with Scott, if someone wants other parts too.

Regards Steven.

What other parts can you get? Post pics of your car so we can see what you have that the USDM's don't. :biggrin:

Thanks!

(I'd consider getting one of these too!)

[Danish Yaris]

Hi

My car doesn´t have all the accessories avaible, but the model I have is the most expensive after the T Sport, so it´s the one with most stock equipment.
Here are some pictures of it:
http://www.yarisworld.com/forums/showthread.php?t=13393

Regards Steven.

[gmodder]

Iam in too..Please get back to us with price...

[RagnaCaT]

Hmmmm..... This sounds really nice!!

[CTScott]

Iam in too..Please get back to us with price...

Check the first post. I updated the cost.

[Saggio]

Hi

My car doesn´t have all the accessories avaible, but the model I have is the most expensive after the T Sport, so it´s the one with most stock equipment.
Here are some pictures of it:
http://www.yarisworld.com/forums/showthread.php?t=13393

Regards Steven.

Very nice! I wonder how much your HVAC controls would be. :biggrin:

[gmodder]

Still in at that price

[Adriaan]

When is the last day to send the money for it. If it some time in mid to late april i'll be in on the group buy.

[CTScott]

When is the last day to send the money for it. If it some time in mid to late april i'll be in on the group buy.

At this point I'm just looking for the count. I won't ask for the money until I receive them and am ready to ship them.

[Saggio]

Put me on the list please. I'd buy one!

[goku87]

alrighty, two more people. :)

[Grandieri]

Please add me to the list. I know Im new but paypal for sure.

[cali yaris]

Add me. :thumbsup:

and thanks for doing this.

[Danish Yaris]

Hi

Is there anyone of you that can help me with a VIN number on a Toyota Yaris S model pre 2009? I need it to order a rear skirt for my Toyota Yaris.
Hope someone could help me out quick, you can just PM it to me, I won´t use it for other then order the part from Toyota TMME.

Regards Steven.

[CTScott]

Last Call: I am going to place the order, so midnight EST tonight (4/1) will be your last change to hop on. Again, I won't require payment until I have them in my hands and am ready to forward them on to you...

[WeeYari]

Is the price as outlined in post#1 firm, or subject to change based on # of ppl hopping on?

[CTScott]

Is the price as outlined in post#1 firm, or subject to change based on # of ppl hopping on?

That price was based on dividing the international shipping charge across 20, so I am hoping it will remain at that. Until the box or boxes are packed and weighed I won't be 100% sure, but I am hoping that the shipping weight estimate is pretty close to actual. I don't see it changing by more than a couple of dollars per piece, if it does.

[kxsails]

Please add me to the list from St. petersburg, FL KXSAILS

[JMT529]

Please add me as well if its not too late. Thanks.

[Syroyizhka]

Add me man! when will you get them?

[CTScott]

Add me man! when will you get them?

I finalized the order this morning. Fortunately, I ordered a couple of extras, so I will have one for you.

I am not sure about the when yet, as we are still working out the international bank transfer details.

[njiteb]

i'll take the last one! (although i probably won't be getting a double din anytime soon... just got a single din last month)

[WolfWings]

i'll take the last one! (although i probably won't be getting a double din anytime soon... just got a single din last month)

This still works with a single-DIN unit, it avoids needing the spacers on either side of the head unit though, so things will fit in nice and flush all around. :-)

[JosephDoc]

Hello~~

Is it too late to ask for one? Can you still get one for me?

PM sent also.

[Syroyizhka]

When will u be accepting payment?

[CTScott]

When will u be accepting payment?

As soon as I receive them and am ready to ship. It looks like it will probably be in about 2-3 weeks.

[gwasabi]

Is it too late to ask for one now? do you got any extras? :)

[IsLNdbOi]

What's the status on this group buy?

[CTScott]

What's the status on this group buy?

Still working through the international bank funds transfer. I am hoping to have them in-hand and ready to reship by the end of the month at the latest...

[goku87]

are you going to pm us when you get them or should we just keep watching this thread?

[CTScott]

are you going to pm us when you get them or should we just keep watching this thread?

I'll PM everyone when I'm ready to take payment. I just want to have them in my hands before I make people send me money...

[njiteb]

This still works with a single-DIN unit, it avoids needing the spacers on either side of the head unit though, so things will fit in nice and flush all around. :-)

then won't i have a hole in the bottom or top? lols

[Sodium Duck]

then won't i have a hole in the bottom or top? lols

Yes.

[CTScott]

then won't i have a hole in the bottom or top? lols

You'd need a "standard" kit for filling one DIN slot of the double DIN mounting hole. This type of kit would normally give you a pocket.

Something like this:

http://i29.photobucket.com/albums/c275/autoware302/dash%20kits/UPK750.jpg

http://cgi.ebay.com/Universal-Pocket-Single-Din-Size-Radio-Dash-Mount-Kit-_W0QQitemZ230334106047QQcmdZViewItem

[uncleyaris]

I commend your efforts on the GB!!!!! What a community we have!!!!

[uncleyaris]

Hi

My car doesn´t have all the accessories avaible, but the model I have is the most expensive after the T Sport, so it´s the one with most stock equipment.
Here are some pictures of it:
http://www.yarisworld.com/forums/showthread.php?t=13393

Regards Steven.

Are you willing to buy and ship other stuff available to the Yaris in Denmark?

[uncleyaris]

Like Thomas has before, could you post accessories available?

[njiteb]

You'd need a "standard" kit for filling one DIN slot of the double DIN mounting hole. This type of kit would normally give you a pocket.

Something like this:

http://i29.photobucket.com/albums/c275/autoware302/dash%20kits/UPK750.jpg

http://cgi.ebay.com/Universal-Pocket-Single-Din-Size-Radio-Dash-Mount-Kit-_W0QQitemZ230334106047QQcmdZViewItem

cool, thx scott! just wondering, will the stock bracket work well?

[Danish Yaris]

Are you willing to buy and ship other stuff available to the Yaris in Denmark?


Hi

I can do that if anybody wants some.

Regards Steven.

[Adriaan]

hey njiteb, you can also go to the scrap yard an get the single din slot with a cover from a 95 - 99 camry, paseo and i believe a ceilca. That what i did for mine cuz i also have a single din. I got a camey since it was the cheapest at 2 dollars. Also you need the screws that come with the box and it fits well into the stock brackets. I'll psot some pic when i get back home.

[Nico4960]

:thumbup: Hello from EUROPE (Belgium) :thumbup:

[yrsdrgn]

I know the group buy is probably over but does anyone know another place where i can get one of these pieces? Toyota quoted me $150 for that silver piece

[CTScott]

I know the group buy is probably over but does anyone know another place where i can get one of these pieces? Toyota quoted me $150 for that silver piece

I just sent the money to Denmark today. I ordered 25, which will leave me with 1 or 2 extras, so if you want one I'll add you to the list.

[yrsdrgn]

Please do add me to the list. That would be great. And it's $50?

[CTScott]

Please do add me to the list. That would be great. And it's $50?

At this point it is still $50. By the end of next week Steven should have them in his hands and once he boxes the 25, we'll know for sure what the shipping charge to the US is. We've been working off of an estimate, and as long as that is fairly accurate the price won't change. In an absolute worst case we may be looking at $5 more.

[yrsdrgn]

Okay. I'll be sure to look at this thread for the update.

[njiteb]

hey njiteb, you can also go to the scrap yard an get the single din slot with a cover from a 95 - 99 camry, paseo and i believe a ceilca. That what i did for mine cuz i also have a single din. I got a camey since it was the cheapest at 2 dollars. Also you need the screws that come with the box and it fits well into the stock brackets. I'll psot some pic when i get back home.

:w00t: thanks!

[uncleyaris]

Hi

I can do that if anybody wants some.

Regards Steven.

I went to toyota.de, but had a hard time understanding the site. could you cut/paste the things avilable as accessories, so I could make a wish list!!:thumbup::thumbup:

[Danish Yaris]

Hi

I sent you a PM yesterday.

Regards Steven.

[devinlamothe]

Sweet. I'm excited. :tongue:

[Danish Yaris]

Hi

Parts is ordered today and if I receive them this friday I can ship them out next week. If not I can´t ship them before week 18 as I have vacation next week and not at work.

Regards Steven.

[WeeYari]

I'm hoping our currency exchange rate dosen't start tanking again by the time these arrive. With each passing day, these are getting a tiny bit cheaper for me.

[MGargano]

I just finished installing my double DIN Pioneer and I'm psyched to see it with the 180mm bezel!

[Saggio]

Need.... bezel.... lol

[WolfWings]

I'm just waiting for the bezel at this point... I have the single-DIN Blaupunkt SD48, and the single-DIN Cobra 18 waiting to get installed together, just waiting for the bezel now. :-)

[goku87]

Can't wait!!! :thumbup:

[Danish Yaris]

Hi

I just got the delivery date today and it´s the 22th. April, so they will be shipped the week after.

Regards Steven.

[goku87]

Awwww yeah!!! :thumbup::thumbup::thumbup::thumbup:

[IsLNdbOi]

Wait, what's this thread about? The 180mm DD trim piece or whatever Danish Yaris is selling?

[CTScott]

Wait, what's this thread about? The 180mm DD trim piece or whatever Danish Yaris is selling?

Danish Yaris is my source for the 180mm trim, so he is updating the status of him shipping the 25 to me. He has also made the offer to look into sourcing other European parts for those interested.

[IsLNdbOi]

Ah cool. Thanks Danish Yaris AND CTScott!

[WolfWings]

Yes, thanks much for doing this, and even more so for keeping us all informed!

[ozmdd]

Can't wait!!

[IsLNdbOi]

Danish Yaris, in Europe are there silver aluminum door sill protectors (that say "Yaris" on them) for the 5-door Liftback?

If so, can you get them?

[Danish Yaris]

Hi

Yes, you can buy them as an accessorie, both for 3 door and 5 door hatchbacks.
You can get the in silver or black.

Regards Steven.

[IsLNdbOi]

Hi

I just got the delivery date today and it´s the 22th. April, so they will be shipped the week after.

Regards Steven.


I'm confused... The date of your post is Apr. 16, not the 22nd:
http://www.yarisworld.com/forums/showpost.php?p=290446&postcount=76


When will you be able to ship these out to CTScott?

[MPC Motorsports]

Does anyone know if the Yaris sedan/Vios/Belta comes with a similar part? :iono:

I'd like one for my sedan.

[CTScott]

I'm confused... The date of your post is Apr. 16, not the 22nd:
http://www.yarisworld.com/forums/showpost.php?p=290446&postcount=76


When will you be able to ship these out to CTScott?

Don't sweat it. When he posted that he had placed the order and the expected delivery was the 22nd. He was going to be on vacation this past week, so he should be shipping them to me this week, when he's back to work.

[CTScott]

Does anyone know if the Yaris sedan/Vios/Belta comes with a similar part? :iono:

I'd like one for my sedan.

That's a good question. I see installation manuals for RHD and LHD Yaris liftbacks for the TNS400 (which is the Toyota package for adding navigation with the branded Eclipse AVN2210p), but not for the Sedan. The liftback installation manual was where I ran into the part number for the trim piece.

[Danish Yaris]

I'm confused... The date of your post is Apr. 16, not the 22nd:
http://www.yarisworld.com/forums/showpost.php?p=290446&postcount=76


When will you be able to ship these out to CTScott?

Hi

I posted it the 16th. as I then was told by Toyota Denmark that it would arrive the 22th. That´s why and I wasn´t at work last week.

Regards Steven.

[Danish Yaris]

Hi

I have boxed the parts today and should be shipped out tomorrow if everything works out fine.

Regards Steven.

[keesue]

Damn, I just saw this. Bummer...

[gwasabi]

So we should be expecting our bezel at our front door within the next 3 weeks or so? lol CANT WAIT!

[CTScott]

So we should be expecting our bezel at our front door within the next 3 weeks or so? lol CANT WAIT!

I think so. Steven is hopefully getting the shipment on its way across the Atlantic tomorrow.

[gwasabi]

nicely

[Danish Yaris]

Hi

The box has been sent today and it should arrive in 5-6 days ( workdays ).

Regards Steven.

[Grandieri]

Awesome:headbang:

[anubisx99]

hey I know is a little late but if you have an extra one (or someone decides not to pay or backs out) I'll take it, I'll send you the payment thru paypal the same day you let me know just pm me...thanks.

[CTScott]

hey I know is a little late but if you have an extra one (or someone decides not to pay or backs out) I'll take it, I'll send you the payment thru paypal the same day you let me know just pm me...thanks.

OK. I'll add you to the list of alternates.

[uncleyaris]

GB's are part of the forums benefits!!!

[JosephDoc]

Watching and waiting. :biggrin:

[CTScott]

Watching and waiting. :biggrin:

They're on their way to me. Latest tracking shows them "Sent to the USA". I am expecting them to arrive here on Monday or Tuesday of next week.

[Saggio]

They're on their way to me. Latest tracking shows them "Sent to the USA". I am expecting them to arrive here on Monday or Tuesday of next week.

Sweet! :biggrin:

[CTScott]

I've been refreshing the tracking info about 100 times a day, and it just updated now. Hopefully customs doesn't delay it:

Date Time Event
April 28, 2009 06:20 PM Ready for transport to the U.S.A.
April 29, 2009 08:13 AM Sent to the U.S.A.
May 1, 2009 01:58 PM Arrived in the U.S.A.
May 1, 2009 01:59 PM Item handled by custom

[uncleyaris]

Way to go guys!!!

[WeeYari]

Excellent.

Now 3 of them have one more customs stop to make.

[cali yaris]

I hope "handled" means "gently".... :rolleyes:

[WolfWings]

Eh... it's customs. It probably means 'dropped from a forklift and rattled around with a paint mixer with jumper-cables hooked up to opposite corners' just to make sure there's nothing that's chemically capable of exploding.

[goku87]

Eh... it's customs. It probably means 'dropped from a forklift and rattled around with a paint mixer with jumper-cables hooked up to opposite corners' just to make sure there's nothing that's chemically capable of exploding.

actually they just open it up and look at everything. whenever he gets that package it will most likely have a packing list on the outside stating what is in it that customs put on it.

[WolfWings]

actually they just open it up and look at everything. whenever he gets that package it will most likely have a packing list on the outside stating what is in it that customs put on it.

Yeah, I know. I was just goofing around with how vague the 'handled by customs' entry was, especially with what 'shipping and handling' has come to mean to a lot of the shipping companies over the years like UPS or FedEx. :bonk:

[Saggio]

Need it.... Can't wait! :)

[CTScott]

THEY'RE HERE!!!!!!


I just received the giant box from Denmark! All arrived in perfect condition and I, of course, immediately ripped mine out and installed the new one.

We owe a huge thanks to Steven (Danish_Yaris) for coordinating this GB for us!!!!


Comparison of my old one and the new one:
http://i372.photobucket.com/albums/oo163/ctscott329/Radio/180mmTrimComparison.jpg

Installed (Good bye Metra kit):
http://i372.photobucket.com/albums/oo163/ctscott329/Radio/180mmTrimIn.jpg

I will be PMing all of the buyers shortly with payment instructions. I can ship a batch tomorrow for any payments that make it in today or tomorrow morning...

[WeeYari]

You've got mail. :thumbsup:

[427chev]

Is it possible to get the gloss black that the RS's have?

Buy the silver one and a can of Testor's model spray paint...

[Grandieri]

pm'd you.Thanks.

[Danish Yaris]

Hi

As I told Scott, I´m glad it arrived safely to the US.
Enjoy the install in your cars and please post some pictures.

Regards Steven.

[gwasabi]

SAme thing here. YOu got paypal'd

[JMT529]

Paid via Paypal as well. Thanks!!!

[MGargano]

Paid via Paypal. Thanks!

[WolfWings]

I'm daring here, credit-card payment, away! *punt*

[CTScott]

Thanks for the quick payments! Gmodder sent his so quick I was able to get his out today. Eight more, so far, are going out tomorrow. I am updating the original post as I queue them for shipping...

[njiteb]

just sent the payment! Thanks Scott and Steven!

[vitzzz]

hi danish yaris, can you please send me any prices also for these plastics trim also as in the picture arrowed for the oem stereo. thanks

[Adriaan]

paypal request sent thanks again for doing do and organizing this group buy CTScott & Danish Yaris

[CTScott]

As of now, 15 of the 25 are on their way.

If any of the remaining have changed their mind, let me know, as I have a list of people who expressed interest after the order was already placed.

[njiteb]

it's already here! i'll get it in as soon as my pocket comes~

[IsLNdbOi]

Mine still says:

The U.S. Postal Service was electronically notified by the shipper on May 7, 2009 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated every evening. Please check again later.

[CTScott]

Mine still says:

The U.S. Postal Service was electronically notified by the shipper on May 7, 2009 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if / when available. Information, if available, is updated every evening. Please check again later.

Yours went out in the same batch as njiteb's, but he's only one state away. I would bet that you'll get yours on Monday. As far as the tracking goes, with USPS, there won't be an update until you actually receive it.

[njiteb]

^i'm a girl, btw~ ^_^

[cali yaris]

^ good to know

[Saggio]

Just sent payment via Paypal.

[CTScott]

I just made another post office run - Just 6 more left to ship!

[JosephDoc]

Thanks Scott!!

I got the trim piece today, and I am glad that it is an o/e piece by Toyota France. Nice, my car was all JDM only but now with this "FDM" part!! :clap:

[Taiyaki]

Excellent stuff, got mines today as well. Here are pics

http://img.photobucket.com/albums/v520/02Sakura/IMG_4670.jpg

http://img.photobucket.com/albums/v520/02Sakura/IMG_4671.jpg

[CTScott]

Excellent stuff, got mines today as well. Here are pics

http://img.photobucket.com/albums/v520/02Sakura/IMG_4670.jpg

http://img.photobucket.com/albums/v520/02Sakura/IMG_4671.jpg

Looks great! I can't believe that US Mail got it from Connecticut to Hawaii that quickly.

[Taiyaki]

Tell me about it! The shipping was sooo fast! haha

[PHXDEMON]

How did I miss this thread :eek::frown: Let me know if you have any left. :respekt:

[CTScott]

How did I miss this thread :eek::frown: Let me know if you have any left. :respekt:

I'll add you to the waiting list. There are six still awaiting payment, so keep your fingers crossed...

[PHXDEMON]

I'll add you to the waiting list. There are six still awaiting payment, so keep your fingers crossed...

Awesome :thumbup:

[WeeYari]

Mine probably hasn't cleared Canadian Customs yet :(

[WolfWings]

Got mine yesterday, but didn't get back from work in time to hit the front office of the apartment complex and pick it up. Just put it in, looks great. I'll get pictures later at work tonight. =^.^=

[JosephDoc]

I am putting up my today. I can't wait for the new look!!!

[808_Yaris]

ctscott let me know if you have any left. i'm interested also.

[CTScott]

ctscott let me know if you have any left. i'm interested also.

Will do. I am still waiting to hear from the last six.

[808_Yaris]

sounds good. if there's not enough, will you be ordering more?

[CTScott]

sounds good. if there's not enough, will you be ordering more?

Not at the moment. It started with me looking to get one for myself. After looking into shipping costs it turned out that I needed to order at least 15-20 to make the shipping costs worthwhile.

[808_Yaris]

hope you have extras:smile:

[anubisx99]

what about if you get another big order??? would you do it again or at least tell me all the steps you took so we can start another group buy?, I still have my hopes that you'll have a few extras for us "the little people" tho...

[pariahdecss]

Got mine today and stuck it in, it looks a helluva a lot better than my old Metra kit. I had to trim a little off of the back for my particular headunit with my Dremel but it did not take long. I have a lousy camera . . .
http://www.nohobikeclub.org/yaris/new_trim1.jpg
http://www.nohobikeclub.org/yaris/new_trim2.jpg

Thanks CTScott and Steven (Danish_Yaris) for coordinating this
:respekt:

[CTScott]

what about if you get another big order??? would you do it again or at least tell me all the steps you took so we can start another group buy?, I still have my hopes that you'll have a few extras for us "the little people" tho...

I might consider doing another if there is enough interest. With the bank wire fees and shipping costs, it takes quite a few to keep the cost reasonable. In this case, Steven got us such a great price on the parts that the final price is more than $20 less than what we'd pay to replace our stock radio trim.

[vten]

i want one too

[808_Yaris]

add me on the list if you do another one :)

[lammy29]

http://www.yarisworld.com/forums/attachment.php?attachmentid=22690&stc=1&d=1241274340
my yaris from uk will it fit? i would be interested but will you ship to uk??

[IsLNdbOi]

Been trying to install mine for the past 10 minutes, but can't get it in. I have to angle it to get one side in, but can't angle it the same way for the other side to get the other side in.

Scott, you have a 5-door '09 LB as well. Any tips on putting it in?

[IsLNdbOi]

Ok, figured out why it won't work. My HU (a Pioneer FH-P8000BT) has a small "faceplate" around the front. It's permanently attached (cannot be removed) and this faceplate makes the sides of the unit a little larger than what this trim piece can slide through.

Do you take returns Scott?

Anyone interested in mine? I did manage to scratch it up a little when trying to get it on. There are three scratches on it now. Two are in spots that would be hidden anyway once a head unit is installed (the dark smudges on the the back corner in each pic.). The third is on the front right side of the trim piece.

Pics.:
http://img216.imageshack.us/img216/2091/bottomrightcorner.jpg

http://img301.imageshack.us/img301/8624/bottomleftcorner.jpg

[WolfWings]

If the HU faceplate has any trim that sticks out behind the 7" width of the chassis, even if it looks like it can never come off, it can. That head unit can be made 'chassis flush' all around, as seen from this rear-shot of the fully stripped chassis:

http://akamaipix.crutchfield.com/products/2008/130/x130P8000BT-b.jpeg

Or is this a matter of things not quite fitting just in the corners? Have you tried sliding the head unit into the trim, instead of the trim over the head unit?

[IsLNdbOi]

I tried sliding the HU through the front and the back and it wouldn't fit. It's not just the corners. As I mentioned above, the FH-P8000BT has a faceplate permanently attached to it that can't be removed. I took the entire thing out and it does have screws to remove the entire front of the unit. When you do that, you find that the parts circled in red are permanently attached / molded into / is one piece w/ the entire front of the head unit.

I've circled it in red here:
http://img19.imageshack.us/img19/4724/h130p8000btomt1.jpg

[MGargano]

I tried sliding the HU through the front and the back and it wouldn't fit. It's not just the corners. As I mentioned above, the FH-P8000BT has a faceplate permanently attached to it that can't be removed. I took the entire thing out and it does have screws to remove the entire front of the unit. When you do that, you find that the parts circled in red are permanently attached / molded into / is one piece w/ the entire front of the head unit.

I've circled it in red here:
http://img19.imageshack.us/img19/4724/h130p8000btomt1.jpg

I had the same problem with the new dash trim and a Pioneer AVH-P4000DVD. My head unit has that non-removable trim piece around it as well. Just use a dremel tool/sand paper/file to trim the plastic dash trim until it fits. Took me about 30 minutes but finally I got it to snap into place and it looks awesome. Don't give up because it can be done with a little patience. The pieces you file/sand cannot be seen once the dash trim is in place, so don't worry about that.

[CTScott]

I tried sliding the HU through the front and the back and it wouldn't fit. It's not just the corners. As I mentioned above, the FH-P8000BT has a faceplate permanently attached to it that can't be removed. I took the entire thing out and it does have screws to remove the entire front of the unit. When you do that, you find that the parts circled in red are permanently attached / molded into / is one piece w/ the entire front of the head unit.

I've circled it in red here:


In doing some searching, I see mention of it being common to have to trim to fit the FH-P8000BT. I couldn't find actual dimensions for that ring. Usually the installation manual has the detailed dimensions, but not for that Pioneer.

[CTScott]

http://www.yarisworld.com/forums/attachment.php?attachmentid=22690&stc=1&d=1241274340
my yaris from uk will it fit? i would be interested but will you ship to uk??

To use it with your Yaris, you would also have to replace the outer vertical trim pieces that have the cut-outs for the radio controls. You would need:

PZ489-B0330-00 (The silver trim piece)
55436-52010-B0 and 55435-52010-B0 (The left and right vertical trim pieces)

You may be able to get the parts directly from your Toyota dealer, since they originate from Europe. If not, it would probably be much more cost effective for you to go directly through "Danish Yaris", as shipping from Denmark to the UK would be more reasonable.

[Danish Yaris]

Hi

I´m happy to hear all likes the trims.
If Scott wants and there is enough, I sure will help you with more radiopanels.

Lammy29: If you can´t get the part numbers that Scott wrote to you, I can ship it directly to you, no problem.

Regards Steven.

[JosephDoc]

So I swap mine last night.

I have a Kenwood-8120 and I had to shave off the inner side for about 15mm to make it fit. I guess for some bigger HUs like mine, there will be some modification work needed.

It tooK me 1.5 hours but I am still happy!!!

Thansk Scott and Steven

-------------
Yup, I did it with a dremel.

[IsLNdbOi]

I had the same problem with the new dash trim and a Pioneer AVH-P4000DVD. My head unit has that non-removable trim piece around it as well. Just use a dremel tool/sand paper/file to trim the plastic dash trim until it fits. Took me about 30 minutes but finally I got it to snap into place and it looks awesome. Don't give up because it can be done with a little patience. The pieces you file/sand cannot be seen once the dash trim is in place, so don't worry about that.

Wait so what did you have to file? The parts of the HU I circled in red or the trim piece from Scott? If it was the trim piece from Scott, what part of it did you file?



In doing some searching, I see mention of it being common to have to trim to fit the FH-P8000BT. I couldn't find actual dimensions for that ring. Usually the installation manual has the detailed dimensions, but not for that Pioneer.

Scott, add me to the list (if you have one) for the next group buy. I'd like another one of these since I damaged the first one. The damages could be easily fixed by sanding and repainting, but I don't have the time or skills for that.

[CTScott]

Wait so what did you have to file? The parts of the HU I circled in red or the trim piece from Scott? If it was the trim piece from Scott, what part of it did you file?





Scott, add me to the list (if you have one) for the next group buy. I'd like another one of these since I damaged the first one. The damages could be easily fixed by sanding and repainting, but I don't have the time or skills for that.

OK - I'll add you to the list. Looking at your pictures, I think that what you will need to trim is the scratched area, so you may be OK, other than the scratch on the outer part of the right side.

Can you pop off the existing trim and take a picture with the new trim aligned, so we can see how much trimming needs to happen for your HU?

Looking at peoples' responses thus far, it looks like Pioneer and Kenwood units have required some amount of modification to fit. Eclipse HUs seem to fit without a problem. As people install theirs, please post your HU make/model and experience with the installation, and I'll start compiling the data on the first page of the thread, so we'll know what works out of the box, and what requires modification to work.

[pariahdecss]

Yes my HU is a Kenwood DNX7120 and I had to trim the new trim piece (not the headunit) about 10mm on the back lip to make it fit - for those that are really picky the color of the new piece for my '09 LB is not a 100% match against the center AC/Air center gauge cluster trim but I am fine with that. The new trim piece is lighter than the slightly darker/smokier USDM center gauge panel.

. . . but it still looks hella better than the Metra® gap filler crap kit

[CTScott]

I just popped mine off to take some measurements. My Eclipse AVN2210p (which is actually the radio that Toyota made this piece because of) has a wider trim ring, which is about 1" in from the face. You can see it in the picture below. The wider ring is 179mm x 97mm. The narrower section is 170mm x 94mm.

http://i372.photobucket.com/albums/oo163/ctscott329/Radio/AVN2210p.jpg


The new trim piece's opening is 174mm x 100mm (6 7/8" x 3 15/16"). This is 6mm narrower than Double DIN spec, which probably explains why some HU's fit without a problem and others don't.


Also, the lip of the new trim piece extends 10mm deeper than the original did (see the pic below).

http://i372.photobucket.com/albums/oo163/ctscott329/Radio/TrimComparison.jpg

[IsLNdbOi]

Thanks Scott. Keep me on the list. I'll try taking pics. later. I just find it a PITA to remove the trim pieces and panels to take the HU out.

[CTScott]

Thanks Scott. Keep me on the list. I'll try taking pics. later. I just find it a PITA to remove the trim pieces and panels to take the HU out.

Grab the vertical trim pieces low, on the outside (by the storage pockets) and pull outward. They come off much easier from bottom to top.

[enviri]

scott add me to the list too, its time for me to start getting a system.

[WeeYari]

It has arrived in Canada!

Will try to install tomorrow night. HU will be JVC.

[IsLNdbOi]

I tried trimming all around the back of the trim piece. Trimmed all the way to the line on the surface where you can see where the plastic was "joined" together.

Still no go. This is the best pic. I could take of it.

It's like this on both sides:


http://img9.imageshack.us/img9/5901/edgeqdx.jpg



I do plan on getting the new version of the P8000BT later this year. They've released new versions of most of their 2008 models already. Hopefully, they don't add the stupid faceplate on the new model.

I do still want another of these DD trim pieces Scott so keep me on the list.

[CTScott]

I tried trimming all around the back of the trim piece. Trimmed all the way to the line on the surface where you can see where the plastic was "joined" together.

Still no go. This is the best pic. I could take of it.

It's like this on both sides:


I do plan on getting the new version of the P8000BT later this year. They've released new versions of most of their 2008 models already. Hopefully, they don't add the stupid faceplate on the new model.

I do still want another of these DD trim pieces Scott so keep me on the list.


If I understand correctly, you're trimming the lip of the trim piece to make it less deep? If that is the case, how close is it depth-wise from the trim piece being able to snap on? Also, if you were able to move the HU in deeper (by re-drilling the bracket mounting holes), would that help?

[Danish Yaris]

Yes my HU is a Kenwood DNX7120 and I had to trim the new trim piece (not the headunit) about 10mm on the back lip to make it fit - for those that are really picky the color of the new piece for my '09 LB is not a 100% match against the center AC/Air center gauge cluster trim but I am fine with that. The new trim piece is lighter than the slightly darker/smokier USDM center gauge panel.

. . . but it still looks hella better than the Metra® gap filler crap kit

Hi

That´s because the radiopanel is made for the non faceliftet model which is a lighter silver in color.

Regards Steven.

[IsLNdbOi]

If I understand correctly, you're trimming the lip of the trim piece to make it less deep?

Yes, I thought that's what everyone was telling me to try in the previous posts in this thread. It doesn't look very nice though. You can see in the picture that the trimmed lip can be seen.



If that is the case, how close is it depth-wise from the trim piece being able to snap on? Also, if you were able to move the HU in deeper (by re-drilling the bracket mounting holes), would that help?

Not sure how close it is to being able to snap on. Didn't take that measurement. I don't think moving the HU in deeper would help. The problem is the attached ring / faceplate on the front of the HU.

[WeeYari]

SHIT!!

It's not going to work without some jigging. Going to have to shave about a quarter of an inch off of the sides of the HU opening in the trim panel.

[CTScott]

SHIT!!

It's not going to work without some jigging. Going to have to shave about a quarter of an inch off of the sides of the HU opening in the trim panel.

What HU do you have?

[WeeYari]

What HU do you have?

JVC

[CTScott]

JVC


Looking at an unmounted picture of your KW-XG700, it has a similar lip to IsLNdbOi's Pioneer. Does the narrower part beyond that lip fit through the opening, or is that the area that needs to be trimmed for?

[IsLNdbOi]

The manual for the P8000BT shows this for the dimensions:

Dimensions (W × H × D):
D
Chassis ..................... 178 mm × 100 mm × 160 mm
(7 in.× 3-7/8 in.× 6-1/4 in.)
Nose ........................... 170 mm × 94 mm × 8 mm
(6-3/4 in.× 3-3/4 in.× 3/8 in.)


I couldn't get the P8000BT in even through the front of the new trim piece.

[WeeYari]

Ground off the positioning pins on the HU mounting brackets. Was then able to position HU further back.

[IsLNdbOi]

So after grinding the pins off and mounting the HU further back, does any part of the HU even touch the new 180mm DD trim piece?

[WeeYari]

So after grinding the pins off and mounting the HU further back, does any part of the HU even touch the new 180mm DD trim piece?

The face frame of the HU measured 178mm, with an extended nose at 170mm.
By repositioning the HU, the trim now 'rests' on the 178mm portion of the face frame. There is no contract being made on the inside of the trim piece opening.

[CTScott]

I still haven't gotten a reply from PMs to: ozmdd, yrsdrgn, hwnstyle21, or Syroyizhka.

Please let me know ASAP if you are still interested. I would like the get the last of these shipped this week. If I don't hear from you by mid-week, I'm going to go ahead and move them to the next people on the waiting list.

[IsLNdbOi]

How many people do you have on the waiting list? Are there enough on the list for the next group buy?

[CTScott]

How many people do you have on the waiting list? Are there enough on the list for the next group buy?

Thus far, six on the waiting list, and 5 sales still pending.

[lammy29]

To use it with your Yaris, you would also have to replace the outer vertical trim pieces that have the cut-outs for the radio controls. You would need:

PZ489-B0330-00 (The silver trim piece)
55436-52010-B0 and 55435-52010-B0 (The left and right vertical trim pieces)

You may be able to get the parts directly from your Toyota dealer, since they originate from Europe. If not, it would probably be much more cost effective for you to go directly through "Danish Yaris", as shipping from Denmark to the UK would be more reasonable.

thanks also would this item form ebay fit the item ya selling?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=250239120992&Category=108815&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2

i have a alpine cda-9855
http://akamaipix.crutchfield.com/products/2004/500/h500CDA9855-fp.jpg

[CTScott]

thanks also would this item form ebay fit the item ya selling?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=250239120992&Category=108815&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2

No. That is made to reduce the opening for the OEM one that comes on our cars here. It lets you mount a single DIN radio in the OEM opening. With the trim we have purchased to mount a single DIN radio you would just have to use the pocket to fill the space below the radio.

[lammy29]

No. That is made to reduce the opening for the OEM one that comes on our cars here. It lets you mount a single DIN radio in the OEM opening. With the trim we have purchased to mount a single DIN radio you would just have to use the pocket to fill the space below the radio.

so if i purchased the thing you are selling it would end up looking like the pic below??
http://img.photobucket.com/albums/v373/deltasix/IMG_0421.jpg

[CTScott]

so if i purchased the thing you are selling it would end up looking like the pic below??



No. It would not have the black filler on the sides - The silver would meet the sides of the radio face.

[lammy29]

No. It would not have the black filler on the sides - The silver would meet the sides of the radio face.

does that mean i can just put my system straight in, or wont fit.:confused: lol sorry being akward and asking like a milli questions. what about the the bottom bit will there jus be a gap?

[CTScott]

does that mean i can just put my system straight in, or wont fit.:confused: lol sorry being akward and asking like a milli questions. what about the the bottom bit will there jus be a gap?

No problem. Your radio should fit, but would have an opening below it, since it is half of the height of the opening. You would then fill the opening with a single DIN filler, like the pocket shown below:

http://i29.photobucket.com/albums/c275/autoware302/dash%20kits/UPK750.jpg

[ImportRacer88]

do they have any for the sedans

[CTScott]

do they have any for the sedans

No - Not that I've been able to find.

[ozmdd]

pm sent

[lammy29]

No problem. Your radio should fit, but would have an opening below it, since it is half of the height of the opening. You would then fill the opening with a single DIN filler, like the pocket shown below:

http://i29.photobucket.com/albums/c275/autoware302/dash%20kits/UPK750.jpg

do you know where i can get that from?

[Danish Yaris]

Hi

I´m not sure, but maybe you can use the original Toyota one.

Regards Steven.

[CTScott]

do you know where i can get that from?

You can typically pick up a single DIN filler pocket from places that sell/install car stereos.

The one that I showed above is from ebay:

http://cgi.ebay.com/Universal-Pocket-Single-Din-Size-Radio-Dash-Mount-Kit_W0QQitemZ350203320551QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item5189be98e7&_trksid=p3286.m20.l1116

[lammy29]

You can typically pick up a single DIN filler pocket from places that sell/install car stereos.

The one that I showed above is from ebay:

http://cgi.ebay.com/Universal-Pocket-Single-Din-Size-Radio-Dash-Mount-Kit_W0QQitemZ350203320551QQcmdZViewItemQQptZLH_Def aultDomain_0?hash=item5189be98e7&_trksid=p3286.m20.l1116

sweet your awesome!!:bow:
so i need:
PZ489-B0330-00
55436-52010-B0
55435-52010-B0
and the ebay item and i will able to fit my alpine system in?????

[CTScott]

sweet your awesome!!:bow:
so i need:
PZ489-B0330-00
55436-52010-B0
55435-52010-B0
and the ebay item and i will able to fit my alpine system in?????

Correct. You may have to be a bit creative to mount the alpine HU and the pocket to the stock brackets (a little drilling and/or grinding of the brackets may be required).

[lammy29]

Correct. You may have to be a bit creative to mount the alpine HU and the pocket to the stock brackets (a little drilling and/or grinding of the brackets may be required).

:thumbup:i waited 2yrs nearly..........

so i dont need to purchase the item your selling?

[lammy29]

what about these for the pockets?
http://cgi.ebay.co.uk/DIN-pocket-cubby-hole-radio-blank_W0QQitemZ140321252801QQcmdZViewItemQQptZUK_C arsParts_Vehicles_FasciaPlates_SM?hash=item1403212 52801&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318|301%3A1 |293%3A1|294%3A50
or
http://cgi.ebay.co.uk/Snap-In-Din-pocket-hole-filler-radio-blanking-panel-NEW_W0QQitemZ120416458258QQcmdZViewItemQQptZLH_Def aultDomain_3?hash=item120416458258&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318|301%3A1 |293%3A1|294%3A50

[IsLNdbOi]

You should look for the authentic Toyota branded single din pocket w/ door. I've found some on eBay before. I think they came out of old Camrys.

[lammy29]

You should look for the authentic Toyota branded single din pocket w/ door. I've found some on eBay before. I think they came out of old Camrys.

i tried searching, but don't know what to search for. the reason i trying find a different one is because its a usa seller and i prefer if possible a uk seller that way save time and custom payment

typed in toyota single din and found this what u reckon?
http://cgi.ebay.co.uk/Toyota-Verso-to-05-Single-DIN-Facia-Plate-Adaptor_W0QQitemZ310139747594QQcmdZViewItemQQptZUK _CarsParts_Vehicles_FasciaPlates_SM?hash=item31013 9747594&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50
or even this one
http://cgi.ebay.com/ebaymotors/METRA-99-8216-TOYOTA-YARIS-SINGLE-DIN-RADIO-KIT-2007-07_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a15Q7c 39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50 QQ_trksidZp3286Q2ec0Q2em14QQhashZitem140185573557Q QitemZ140185573557QQptZCarQ5fAudioQ5fVideo

[CTScott]

:thumbup:i waited 2yrs nearly..........

so i dont need to purchase the item your selling?

The part that this thread is about is the PZ489-B0330-00, which is one of the three Toyota parts that you need.

[CTScott]

what about these for the pockets?
http://cgi.ebay.co.uk/DIN-pocket-cubby-hole-radio-blank_W0QQitemZ140321252801QQcmdZViewItemQQptZUK_C arsParts_Vehicles_FasciaPlates_SM?hash=item1403212 52801&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318|301%3A1 |293%3A1|294%3A50
or
http://cgi.ebay.co.uk/Snap-In-Din-pocket-hole-filler-radio-blanking-panel-NEW_W0QQitemZ120416458258QQcmdZViewItemQQptZLH_Def aultDomain_3?hash=item120416458258&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A15|39%3A1|240%3A1318|301%3A1 |293%3A1|294%3A50

The second one has this disclaimer:

"Please not if you are installing a stereo into a Japanese vehicle you will need the dearer din pocket kit as the standard width of a Japanese aperture is smaller than din size and the pocket has to fit from behind."

So, I think you need one which attaches to the brackets with screws, rather than a snap-in one.

[lammy29]

The part that this thread is about is the PZ489-B0330-00, which is one of the three Toyota parts that you need.
cool, just me making sure and wastin your time sorry!!
The second one has this disclaimer:

"Please not if you are installing a stereo into a Japanese vehicle you will need the dearer din pocket kit as the standard width of a Japanese aperture is smaller than din size and the pocket has to fit from behind."

So, I think you need one which attaches to the brackets with screws, rather than a snap-in one.

so would you say safest bet is the one you recommended first time?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=350203320551

[IsLNdbOi]

This is the Toyota one with the door:

http://cgi.ebay.co.uk/DIN-Pocket-Tray-Toyota-Supra-Celica-MR2-Starlet-Storage_W0QQitemZ330326698187QQcmdZViewItemQQptZUK _CarsParts_Vehicles_FasciaPlates_SM?hash=item33032 6698187&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50


found it after 5 seconds of searching.

[CTScott]

i tried searching, but don't know what to search for. the reason i trying find a different one is because its a usa seller and i prefer if possible a uk seller that way save time and custom payment

typed in toyota single din and found this what u reckon?
http://cgi.ebay.co.uk/Toyota-Verso-to-05-Single-DIN-Facia-Plate-Adaptor_W0QQitemZ310139747594QQcmdZViewItemQQptZUK _CarsParts_Vehicles_FasciaPlates_SM?hash=item31013 9747594&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50
or even this one
http://cgi.ebay.com/ebaymotors/METRA-99-8216-TOYOTA-YARIS-SINGLE-DIN-RADIO-KIT-2007-07_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a15Q7c 39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50 QQ_trksidZp3286Q2ec0Q2em14QQhashZitem140185573557Q QitemZ140185573557QQptZCarQ5fAudioQ5fVideo



This would work:

http://cgi.ebay.co.uk/Autoleads-FP-006-Universal-Din-E-Pocket_W0QQitemZ260363938539QQcmdZViewItemQQptZUK_ Cars_Parts_Vehicles_Terminals_Cabling_ET?hash=item 260363938539&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50

[CTScott]

This is the Toyota one with the door:

http://cgi.ebay.co.uk/DIN-Pocket-Tray-Toyota-Supra-Celica-MR2-Starlet-Storage_W0QQitemZ330326698187QQcmdZViewItemQQptZUK _CarsParts_Vehicles_FasciaPlates_SM?hash=item33032 6698187&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50


found it after 5 seconds of searching.

I am not sure if that would fit. It depends on if the door width is less than 174mm.

[lammy29]

This would work:

http://cgi.ebay.co.uk/Autoleads-FP-006-Universal-Din-E-Pocket_W0QQitemZ260363938539QQcmdZViewItemQQptZUK_ Cars_Parts_Vehicles_Terminals_Cabling_ET?hash=item 260363938539&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A13 18|301%3A1|293%3A1|294%3A50

once again:bow: ima go into my local dealer and see how much i can get the three parts for and hopefully they will have it!! i let you know how it goes. maybe pm you becus i used like a whole page in this thread

[lammy29]

"Well the prices are similar, in order to actually supply you with something I will adjust the postage a bit laugh.gif

Total price inc delivery 107.42" managed to get the three parts for little bit cheaper after asking around was orginally £118. :biggrin: also ordered http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=260363938539

hopefully will be here for friday!!!!! i let you know how it goes!!!

:bow: once again Thanks! cant wait!!!! i think i might need adapter so it can fit the alpine system right?

[CTScott]

"Well the prices are similar, in order to actually supply you with something I will adjust the postage a bit laugh.gif

Total price inc delivery 107.42" managed to get the three parts for little bit cheaper after asking around was orginally £118. :biggrin: also ordered http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWNX:IT&item=260363938539

hopefully will be here for friday!!!!! i let you know how it goes!!!

:bow: once again Thanks! cant wait!!!! i think i might need adapter so it can fit the alpine system right?


Yes, you need a wiring harness adapter:

http://cgi.ebay.co.uk/TOYOTA-YARIS-RADIO-INSTALL-WIRE-HARNESS-70-1761_W0QQitemZ140146564197QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item140146564197&_trksid=p3286.m63.l1177

[lammy29]

Yes, you need a wiring harness adapter:

http://cgi.ebay.co.uk/TOYOTA-YARIS-RADIO-INSTALL-WIRE-HARNESS-70-1761_W0QQitemZ140146564197QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item140146564197&_trksid=p3286.m63.l1177

cool i rang up halfords and prob pick up one later today or on friday

[IsLNdbOi]

Ground off the positioning pins on the HU mounting brackets. Was then able to position HU further back.


If possible, can you post pictures of your modified mounting brackets? Which of the positioning dimples did you grind off on each bracket?

So the new trim piece doesn't rest on the face frame of your head unit? If not, don't you see a gap / empty space around the face frame of your head unit (between the face frame and the trim piece)?

[WeeYari]

If possible, can you post pictures of your modified mounting brackets? Which of the positioning dimples did you grind off on each bracket?

So the new trim piece doesn't rest on the face frame of your head unit? If not, don't you see a gap / empty space around the face frame of your head unit (between the face frame and the trim piece)?

I really don't feel like ripping everything apart again.

If possible, can you take and post up a picture of the side of your HU, as well as one of the mounting bracket. I will then use those to show you what I did.

The trim piece does rest on the HU. When the trim reaches the point where it snaps into place, the back side of the opening just meets up with the 'flange' on the face frame.

[CTScott]

I really don't feel like ripping everything apart again.

If possible, can you take and post up a picture of the side of your HU, as well as one of the mounting bracket. I will then use those to show you what I did.

The trim piece does rest on the HU. When the trim reaches the point where it snaps into place, the back side of the opening just meets up with the 'flange' on the face frame.


Here's a picture of the left bracket. You can see the six alignment bumps.

23981

[WeeYari]

Scott,

Can you give me two pictures of the bracket standing on its end as if it was in its mounted position. I would like one of both the inside, and outside of the bracket. It would be my intent to combine bracket photos, with one of the side of the HU so that I may draw arrows between the two to indicate re-alignment positioning.

Thanks.

[CTScott]

Scott,

Can you give me two pictures of the bracket standing on its end as if it was in its mounted position. I would like one of both the inside, and outside of the bracket. It would be my intent to combine bracket photos, with one of the side of the HU so that I may draw arrows between the two to indicate re-alignment positioning.

Thanks.

Stock radio with bracket mounted:

23983


Both brackets viewed from front:
23984


Left Bracket:
23985

Right Bracket:
23986

[pariahdecss]

I had to do this too, in my case I took a ball peen hammer and bashed down the alignment bumps, and then I slotted out the holes so that I could slide my HU further back so that it is almost flush with the new trim - slightly proud. It looks much better this way. It did take some back and forth to get it exactly how I wanted it, but damn it looks sweet.

[WeeYari]

This pic should work for now.

It may have been blind luck that I was able to achieve the exact amount of movement required for my JVC HU.

[IsLNdbOi]

Thanks guys. I'll give this a try when I get the new trim piece.

[IsLNdbOi]

This pic should work for now.

It may have been blind luck that I was able to achieve the exact amount of movement required for my JVC HU.


So the way you mounted it, the HU is attached to each bracket with only one screw?

[WeeYari]

So the way you mounted it, the HU is attached to each bracket with only one screw?

No, 2 screws in each bracket.

[Adriaan]

Received it two days ago but doesn't work with my two single din setup. The radio & the bottom cover pocket are 182mm. I could cut the plastic to get the radio to open but as in the picture, the bottom cover is wider so that wouldn't open. So now I may have to get rid off it, if i can't think of anything after the weekend its gone. I wanted one so badly and i can't use it now. Here a pic of my setup so if anyone else has the same the 180mm radio trim wouldn't work.

http://i40.photobucket.com/albums/e206/adriaan007/IMGP1296.jpg

[IsLNdbOi]

Seems like none of the Pioner / Pioneer Premier head units fit properly in this double din trim piece. I wish Pioneer would create proper double / single din width head units.

[MGargano]

It will fit if you trim the double DIN trim accordingly. I have the Pioneer AVH-P4000DVD which has the same weird face trim piece as yours and I made it work perfectly after a few trips back and forth to the garage to use the dremel tool.

[IsLNdbOi]

Trimmed mine as well. A little bit at a time. Had to trim so much to get my P8000BT to fit that by the time it was trimmed enough, you could see the jagged edges I "trimmed" using my dremel. I posted a picture earlier in this thread.

[CTScott]

Received it two days ago but doesn't work with my two single din setup. The radio & the bottom cover pocket are 182mm. I could cut the plastic to get the radio to open but as in the picture, the bottom cover is wider so that wouldn't open. So now I may have to get rid off it, if i can't think of anything after the weekend its gone. I wanted one so badly and i can't use it now. Here a pic of my setup so if anyone else has the same the 180mm radio trim wouldn't work.

http://i40.photobucket.com/albums/e206/adriaan007/IMGP1296.jpg



How about pushing the headunit in deeper, per WeeYari's instructions above? The HU should work that way. The question is if the door on the pocket will fit within the trim.

[CTScott]

By the way, I have an extra set of brackets.

If someone doesn't have to tools, or doesn't understand the grinding process to move the HU deeper, so the trim piece will fit with wider HUs, I can modify the set that I have and ship it to you in exchange for your set.

[Adriaan]

Still doesn't work due to the cover it the same size as the pionner unit. Because of pionner stupid din size i had to trim the double din metra brackets so it could fit. Guess i'm stuck with the 200mm opening. Unless i change the cover pocket to an open version. But then i'll have items out in the open which i don't like.

[IsLNdbOi]

By the way, I have an extra set of brackets.

If someone doesn't have to tools, or doesn't understand the grinding process to move the HU deeper, so the trim piece will fit with wider HUs, I can modify the set that I have and ship it to you in exchange for your set.


How do you grind the positioning stubs? Will a dremel w/ a sanding head do it?

All I have to do is grind down all of the positioning stubs on the sides of the bracket that face the head unit, right?

[WeeYari]

How do you grind the positioning stubs? Will a dremel w/ a sanding head do it?

All I have to do is grind down all of the positioning stubs on the sides of the bracket that face the head unit, right?

I used a file to remove the stubs. Dremel will work as well. The metal is very soft and easy to remove.

Yes, all you have to do is eliminate all 6 stubs on the HU side of the bracket.

[Sodium Duck]

I used one of those big spinning stone griding wheel things.

[IsLNdbOi]

Finally got it in. For my Pioneer I used my dremel to grind down all six of the positioning stubs. Then I moved the brackets forward until the top front hole was over the front-most screw hole for Toyota mounting points on the Pioneer HU. The top rear hole is now over the hole where the top rear positioning stub used to be.

In this mounting position, I use one of the original mounting bracket screws for the front hole and a short, self-tapping screw for the rear hole (the one that used to be for the positioning stub):
http://img35.imageshack.us/img35/6226/stockradiomountingbrack.jpg

This is the best I could get it. The front bottom edge of the HU is flush / right up against the bottom edge of the new trim piece. The front top edge of the HU is further back so there's a small gap between that top edge of the HU and the top edge of the new trim piece. I'll have to cut the top edge of the stick on bezel that the Pioneer HU came with so I can stick that to the top edge of the front of the HU. Should take care of that gap.

With this new trim piece and the way I had to mount the HU, the HU now sits further back so it's more recessed. I like how this looks.


http://img33.imageshack.us/img33/1307/fronto.png

http://img35.imageshack.us/img35/2677/fromdriverseat.png


Scott, I still need another one of these trim pieces. One of my friends has asked me to install a new HU in his Yaris and he wants me to get one of these for him. Please keep me on the list for your next possible group buy.

[808_Yaris]

^nice pic. find your screw lol!

[WeeYari]

Scott, I still need another one of these trim pieces. One of my friends has asked me to install a new HU in his Yaris and he wants me to get one of these for him. Please keep me on the list for your next possible group buy.

One is for sale here in Toronto.

http://www.yarisworld.com/forums/showthread.php?t=18204

[WeeYari]

This is the best I could get it. The front bottom edge of the HU is flush / right up against the bottom edge of the new trim piece. The front top edge of the HU is further back so there's a small gap between that top edge of the HU and the top edge of the new trim piece. I'll have to cut the top edge of the stick on bezel that the Pioneer HU came with so I can stick that to the top edge of the front of the HU. Should take care of that gap.


I have a small gap at the top of mine which I was able to minimize to nearly un-noticable.

There is a small amount of up/down movement of the HU that can be realized via the 4 screws securing it to the dash assembly. Holding the HU in place with the 4 screws slightly loose, try sliding it up and down. You should notice that you will be able to raise the HU about 1/16".

Give it a shot.

[IsLNdbOi]

I tried re-positioning the HU. Loosened the four screws holding the mounting brackets in then pushed up on the bottom of the HU to raise it as much as possible. While holding it up, I tightened the screws. Helped a little bit, but the gap was still very visible. So, I took that plastic trim pieces that comes with the HU and cut it up so all I had left was the piece that goes along the top edge of front of the HU.

Looks better now:
http://img29.imageshack.us/img29/4875/fixedv.jpg

[paulort]

is it possible to ship it to philippines?

[CTScott]

is it possible to ship it to philippines?

I'm all out of the ones from the group buy at this point. From the Philippines you would probably be able to order the part from a Toyota dealership in Australia (I believe that the Toyota Follow-me package is offered as an option there). If not, it's readily available from Europe.

[anubisx99]

I have one up for grabs...US$55.00 shipped (US)...pm'd me if interested...

[paulort]

ah,okay.thanks for the info. :D

[DED1982]

I can't believe I missed the group buy. I REALLY need this piece! Anyone want to sell me theirs, or start a new GB? Thanks in advance

Doug

[CTScott]

I can't believe I missed the group buy. I REALLY need this piece! Anyone want to sell me theirs, or start a new GB? Thanks in advance

Doug

I am actually getting ready to do another European order, and I am going to grab a few more of these in the process.

[DED1982]

Cool, well, count me in, I'll pay right away! What other pieces were you thinking about getting from over there? I love stuff like this!

Thanks in advance for all the work and planning you've done for the forum.

Doug

[CTScott]

Cool, well, count me in, I'll pay right away! What other pieces were you thinking about getting from over there? I love stuff like this!

Thanks in advance for all the work and planning you've done for the forum.

Doug


There are a couple of people who are looking for the vertical trim pieces that would be required to use some of the Chinese HU's. Also, I am going to get a new set of center caps for my TTE wheels, and I am seriously considering getting a European RS front bumper for my 09.

[uncleyaris]

Post a thread of goodies available, I'm sure the GB sluts will poke interest!!!!!

[Reeves360]

I'm all out of the ones from the group buy at this point. From the Philippines you would probably be able to order the part from a Toyota dealership in Australia (I believe that the Toyota Follow-me package is offered as an option there). If not, it's readily available from Europe.

I'm down for 1 as well. I'm planning on putting in a new stereo here soon.

I just want to double check that this will work for a 09 Yaris Sedan, correct?

[CTScott]

I'm down for 1 as well. I'm planning on putting in a new stereo here soon.

I just want to double check that this will work for a 09 Yaris Sedan, correct?

No. The sedan's radio trim is different than the LB's.

[kudzu71]

There are a couple of people who are looking for the vertical trim pieces that would be required to use some of the Chinese HU's. Also, I am going to get a new set of center caps for my TTE wheels, and I am seriously considering getting a European RS front bumper for my 09.

I'm interested in some of the vertical trim pieces. I've been holding off on the Chinese GPS unit until I read a review of it, but I can't find anyone who has one.

[CTScott]

I'm interested in some of the vertical trim pieces. I've been holding off on the Chinese GPS unit until I read a review of it, but I can't find anyone who has one.

There are a couple of other people who had inquired about those two pieces. They are about $90 plus shipping for the two from Europe.

[eijikikimaru]

is there still going to be another gb for the true Double Din Radio Trim for Liftbacks (180mm opening)?
If not are there other ways of getting the Double Ding Radio Trim???