YARiS Panel Delivery

[jclo3313]

I've been thinking about a YARiS panel delivery for some time now. I'm going to do a "bed" floor in bamboo with polished aluminum runners all the way to the drivers seat. Vinyl on the windows and fabric like the headliner on the inside where the window would be. I just thought it would be kind of different you know. Well let's hear from you, and feel free to let me have it.
21193
Floor close to this
21194
Like the HHR only cooler because it's a YARiS.:biggrin:
21195

[jclo3313]

Tinted windows help the look.
21198

[Shroomster]

....pics aren't showing up...stupid FF

[jkuchta]

I dig it!!

Do this!

[Kal-El]

Toyota doesn't build these, do they? Do you have to convert it yourself?

[YAR1S]

odd.... not my idea of nice but hey... if its good for you then do it.

why do you need a delivery van/hatch thingy anyways?

[Kal-El]

If I needed that type of privacy, I'd just get limo tint on the back windows.
To me, that would just look a lot better and is cheaper.

[SilverBack]

I like the idea. Yaris shag van FTW!

[CTScott]

I like it. I think it would look better with the door pillar red though.

[m911gt]

why do you need a delivery van/hatch thingy anyways?

for the ladies, i'm guessing :iono:
:laugh: JK John, I like the idea, pretty neat!

[AlexNet0]

I think it would look pretty cool, I dont know about how well you would be able to see though.

That would work really well for me because I have quite a few tools and/or equipment that always end up taking over my back seat, and racks could be put up in back if it was like that.

[m911gt]

I think it would look pretty cool, I dont know about how well you would be able to see though.

That would work really well for me because I have quite a few tools and/or equipment that always end up taking over my back seat, and racks could be put up in back if it was like that.

shouldn't be too bad, i used to have a full size panel van and visibility wasn't bad...how much worse could it be in a tiny Yaris?

[1NZYaris1]

Ther is a PDF for factory flat floor conversion , file size is 4.5MB
so it's to large to put up here , but if you PM me your email i will send it to you. :thumbsup:

[yaris-me]

Do it!:thumbsup:

[mikenacarato]

i think it looks unique. do it. :)

[protegeV]

sorry, but that looks TERRIBLE.

[kargoboy]

I say do it.

[jclo3313]

Thanks for the input so far. As to why, do I need to do it, no. I,m not worried about visability at all, if I can drive a firetruck the YARiS is a sinch. The main reanson for going this way is to pull off something unique. Like it love it or leave it, it's just an idea right now.

[fnkngrv]

i like it

[Sabretooth]

Its cool looking, but something I wouldnt drive...

[tk-421]

Something just doesn't look right to me. I feel it looks a lot more balanced with the rear windows IMO.

Then again, whatever floats your boat is fine by me. Definitely a unique mod. :thumbsup:

[Ryu]

If you need privacy at the back, 5% Limo tint would do just fine and cost less.
But Your idea is definitely unique, so go for it if you really like it. :thumbsup:

[cali yaris]

totally cool -- go for it.

1. red door pillar as mentioned
2. larger mini "truck style" rear view mirrors to complete the look.
3. roof racks

[Franck_Qc]

I really like it ! Go for it.

[KCALB SIRAY]

Thanks for the input so far. As to why, do I need to do it, no. I,m not worried about visability at all, if I can drive a firetruck the YARiS is a sinch. The main reanson for going this way is to pull off something unique. Like it love it or leave it, it's just an idea right now.

I'd buy it. Throw a board on top or trick the hatch to have the glass open and the board out the back :headbang:

[ka0sx]

I would get rid of the rear passaner windows anyday for that look. dunno about the floor thing. but i love the look without the windows, super clean, to bad there would be welding involved to do it right with sheetmetal or body work to properly mold CF to seamlessly

[IsLNdbOi]

I've been thinking about a YARiS panel delivery for some time now. I'm going to do a "bed" floor in bamboo with polished aluminum runners all the way to the drivers seat. Vinyl on the windows and fabric like the headliner on the inside where the window would be. I just thought it would be kind of different you know. Well let's hear from you, and feel free to let me have it.
http://www.yarisworld.com/forums/attachment.php?attachmentid=21193&d=1238953702

:barf:

[tuckevalastin]

I love classic panel deliveries and I love the HHR panel (especially the ss) but the Yaris is not the right type of vehicle for it. IMO it will end up more like an early 1990's Dodge Caravan workvan than anything else.

But if you like it, then you should do! (Gonna need a drop and some themed wheels though)

[KCALB SIRAY]

I love classic panel deliveries and I love the HHR panel (especially the ss) but the Yaris is not the right type of vehicle for it. IMO it will end up more like an early 1990's Dodge Caravan workvan than anything else.

But if you like it, then you should do! (Gonna need a drop and some themed wheels though)
Yep, needs steel wheels color matched with baby moons in the middle. :headbang:

[SailDesign]

I'd like something along these lines, with the teak bed... Lots more work, though.

[jdinrc]

Tinted windows help the look.
21198

That big blank red space is begging for some graphics :thumbsup:

[cali yaris]

Yep, needs steel wheels color matched with baby moons in the middle.

oh hell yeah -- or some 5-spoke classic american mags :wink:

[jclo3313]

Ok, door pillars are now body color, roof rack hauling a kayak.
21305

[KCALB SIRAY]

I like how you made the pillar slightly thicker as well. It makes the car actually look longer than it is. I like it and wish I had thought of it, lol

[jclo3313]

Trying to give the car a more filled out look.

[KCALB SIRAY]

Throw these on there and see what it loks like. maybe some Stockton Wheels

http://memimage.cardomain.com/ride_images/1/2058/4021/5144510133_large.jpg

[33OH]

:w00t:

[eTiMaGo]

now drop it!

[33OH]

Added the fenders to it too. Helps with the look I think.

[jclo3313]

I just need somthing beter than "paint" to do a shop logo.

[33OH]

What kind of shop logo? Get me the "Rusteez" logo from Cars. =)

(I can't go on Google Images at work)

[eTiMaGo]

now we're cookin' with gas...

http://dl.getdropbox.com/u/691356/jclodropped.jpg

:biggrin:

[eTiMaGo]

as capacious as the Yaris is, a little extra space won't hurt...

http://dl.getdropbox.com/u/691356/jclostretch.jpg

[Shroomster]

lmao the home depot...why don't you change the color of the car to orange then, Thomas?

[eTiMaGo]

got wood?

http://dl.getdropbox.com/u/691356/jclowoody.jpg

[jclo3313]

Blocked at work.:thumbdown:

[eTiMaGo]

awww we can't have that... can you see attachments?

[jclo3313]

Thanks Thomas!

[eTiMaGo]

getting your wood saws and sander ready? :biggrin:

[jclo3313]

While super cool it's a bit farther than I want to go right now.:biggrin: I could do it old mini clubman style I guess.
21315

[KCALB SIRAY]

now we're cookin' with gas...

http://dl.getdropbox.com/u/691356/jclodropped.jpg

:biggrin:

This is the money shot right here :headbang:

[tk-421]

This is the money shot right here :headbang:
I like it a lot more looking like that. It might not be so practical to lower the car if it's gonna be carrying lots of stuff around though...

Still, I like where this is going :clap:

[supmet]

I like it a lot more looking like that. It might not be so practical to lower the car if it's gonna be carrying lots of stuff around though...

Still, I like where this is going :clap:

You know, that is EXACTLY what I was thinking :bellyroll:

[ka0sx]

LMFAO wow you guys are just going off on this now

[KCALB SIRAY]

oh hell yeah -- or some 5-spoke classic american mags :wink:
Like these:iono:
http://www.coloradomustang.com/SQLCart/Images/Large/108490.jpg