Help on hooking up amp..

[gmodder]

Ok ive been out of the car stereo stuff since the 80's and all this new stuff is kind of got me mind boggled. This is what i will be hooking up

http://cgi.ebay.com/Soundstream-Picasso-PCX1500D-Subwoofer-Amplifier-3000-W_W0QQitemZ220391906789QQcmdZViewItemQQimsxZ200904 08?IMSfp=TL090408153006r6722

Along with 2 12" Alpine Type R woofers..Now whats got me messed up is the woofers come with some kind of jumper wires what is the best way to hook both of the woofers up to this amp..
If someone would make a diagram at works properly i will pay you 10.00 on paypal..lmao...

[lilred08]

which Alpine type Rs, Dvc 2 ohm or dvc 4 ohm?? i can draw the diagram

[gmodder]

4ohm

[lilred08]

http://www.rockfordfosgate.com/rftech/woofer_wizard.asp?submitted=true&woofer_qty=2&woofer_imp=4


there are to options there,, you probly want to run them at 1 ohm that way yur amp is running cool, if you run them at 4 ohm you be short on power.

[gmodder]

Still confused since my - and + on the alpines are in a straight line not across from each other.

[lilred08]

wire all the negatives on each sub together and wire the positives on each sub together. than run from 1 negative on each sub to the negative terminal. the only difference of your sub is wear the terminals are jus remember the first positive and negative are one voice coil and the next two are the other instead of being across from eachother. so use the diagram to help yu. than those subs are going to be rockin:headbang:

[gmodder]

ok as soon as the amp and other woofer get here i will hook up and if everything works like you say..i will send you 10.00

[lilred08]

deall