Carvin'07
04-17-2009, 10:14 AM
BIG edit to cover all items for sale. I am getting divorced, so I'm selling the Yaris as it doesn't meet my needs (2 kids, dog, gear), so it is going back to stock so I can buy a different car. All prices are in Canadian dollars. Shipping is NOT included.
INTAKE SOLD
PULLIES SOLD
HIDs available!
Wheels available!
INTAKE - $125 Cdn. SOLD!
I've had this since summer 2007, so there is some wear near the end of the tube and the top of the filter from rubbing against the inside of the fender -- see pictures below. Otherwise, near-new condition. Great sound and improved seat of the pants torque. I just drove it with the stock airbox and there is a significant difference below 3000 rpm.
Included: CAI tube, rubber insulator, 2 screws for MAF sensor, used F5 dryflow filter, new F5 dryflow filter, rubber connector and T-bolts for throttle body connection.
15-20 minutes to install if you are efficient. You only need to remove the stock airbox, the MAF sensor, the breather tube, the left front wheel and 5x10 mm bolts holding the splashguards.
8000k bi-xenon HIDs from Xenon Vision $140 Cdn. Still available. I just installed these in January. I am really sad to see them go...they are kickass bright. Have a look at their thread for my pictures from my install. You must remove your DRL module (2 minutes) for these to work. Comes in a nifty box with a licence plate frame...never installed it.
NST crank and WP pullies $85 for both. SOLD to darkmoon87. The colour is blue. I never installed the WP pulley. Great throttle response...of all mods, this made the biggest power difference. They are just pullies and they look like everyone elses', so no pictures. Go to the NST website for pics.
Konig Kolors graphite grey with polished lip. Kumho Ecsta MX 205/40Y/17 $400. Still available, but sale 'pending'. Yes, I will ship these within N.America. These are not showcar rims so they have nicks and scratches -- I drive 32kms each way every day. The tires are pretty much done, although they are quite sticky still: they are a 200 wear rating tire. You could get by this year on them. They are very strong for cast rims. I drive on 8 kms/5mi of potholed gravel every day and they still are completely round. I never thought they would last this long. The clearcoat on the polished part could do with some refinishing.
I am removing the pulley and the HIDs early next week, so if you are interested you will have to be patient.
For shipping quotes, you will need to send me your postal code/zipcode.
Carvin'
INTAKE SOLD
PULLIES SOLD
HIDs available!
Wheels available!
INTAKE - $125 Cdn. SOLD!
I've had this since summer 2007, so there is some wear near the end of the tube and the top of the filter from rubbing against the inside of the fender -- see pictures below. Otherwise, near-new condition. Great sound and improved seat of the pants torque. I just drove it with the stock airbox and there is a significant difference below 3000 rpm.
Included: CAI tube, rubber insulator, 2 screws for MAF sensor, used F5 dryflow filter, new F5 dryflow filter, rubber connector and T-bolts for throttle body connection.
15-20 minutes to install if you are efficient. You only need to remove the stock airbox, the MAF sensor, the breather tube, the left front wheel and 5x10 mm bolts holding the splashguards.
8000k bi-xenon HIDs from Xenon Vision $140 Cdn. Still available. I just installed these in January. I am really sad to see them go...they are kickass bright. Have a look at their thread for my pictures from my install. You must remove your DRL module (2 minutes) for these to work. Comes in a nifty box with a licence plate frame...never installed it.
NST crank and WP pullies $85 for both. SOLD to darkmoon87. The colour is blue. I never installed the WP pulley. Great throttle response...of all mods, this made the biggest power difference. They are just pullies and they look like everyone elses', so no pictures. Go to the NST website for pics.
Konig Kolors graphite grey with polished lip. Kumho Ecsta MX 205/40Y/17 $400. Still available, but sale 'pending'. Yes, I will ship these within N.America. These are not showcar rims so they have nicks and scratches -- I drive 32kms each way every day. The tires are pretty much done, although they are quite sticky still: they are a 200 wear rating tire. You could get by this year on them. They are very strong for cast rims. I drive on 8 kms/5mi of potholed gravel every day and they still are completely round. I never thought they would last this long. The clearcoat on the polished part could do with some refinishing.
I am removing the pulley and the HIDs early next week, so if you are interested you will have to be patient.
For shipping quotes, you will need to send me your postal code/zipcode.
Carvin'