Part #s for Fog Light install? Can anyone who works for Toyota confirm?

[IsLNdbOi]

I would like to install fog lights on my '09 5-door LB, but need to find all the correct parts.

I've searched and have found different part numbers for each part I need.

Can anyone here who works for Toyota confirm each part number is correct for the '09 5-door LB?


New headlight stalk w/ fog light switch (combination switch):
84140-52151

Fog Light Relay:
90987-02027 ?
or
90987-02012 ?

Fog Light Shroud (Left):
81482-52260 ?
or
81482-52250 ?

Fog Light Shroud (Right):
81482-52330 ?
or
81481-52320 ?

[1NZYaris1]

If you want to save some cion talk to Garm at microimage ,
he is now selling his kit's with the correct relay + the wiring to plug into
the relay box under the bonnet.
all you will need then is the stalk , because if i am correct the 08 sedan foglights are the same as the 09 L/B. :thumbsup:
Left: 81482-52250
Right: 81481-52320

[IsLNdbOi]

I'd still need the fog light shrouds since his kit is specifically for the 06-08 LB. The '09s have changed a little bit. Some wiring is different (ex. tail lights, aux jack, etc.) and the fog light shrouds are different.

That's why I'm asking if anyone who works for Toyota could check for me. I could buy a fog light kit for the lights then get the correct parts from Toyota Parts Cheap.

[1NZYaris1]

The fog light shrouds are the same as the 08 Sedan ,from what i have seen .

[IsLNdbOi]

I'd still like to have the part numbers for the parts meant for the '09 LB.

[spookz]

They appear to be the same shape at a glance with the 08 sedans but when looking into closer detail, I believe they're different.
I can try and check for you if you are able to hold until the end of this week..

[BLAZINBLUEVITZ]

STALK: 84140-52151
RELAY: 90080-87026
SHROUD LH: 81482-52260
SHROUD RH: 81481-52330

[DerFlosser]

STALK: 84140-52150
RELAY: 90080-87026
SHROUD LH: 81482-52260
SHROUD RH: 81481-52330


Stalk p/n is wrong. It should be 84140-52151 (08+)

[BLAZINBLUEVITZ]

Stalk p/n is wrong. It should be 84140-52151 (08+)

fixed......

[Lafiro]

What about for an 07 sedan?
Thanks.

[IsLNdbOi]

Thanks guys. BlazinBlue, is this what is shown on Toyota's official parts list?

[BLAZINBLUEVITZ]

Thanks guys. BlazinBlue, is this what is shown on Toyota's official parts list?

yes

[IsLNdbOi]

Is that the same part number for the fog light relay used in the '07 / '08 LB?

[BLAZINBLUEVITZ]

Is that the same part number for the fog light relay used in the '07 / '08 LB?

yes but number i listed is superceeded from old one......

[IsLNdbOi]

So same physical part? Just want to make sure because when I purchased fog light parts for my '07, I got two of the fog light relays for less than $50. At Toyota Parts Cheap, the price for the relay part number you listed is over $60 for just one.

The one I got before at Toyota Parts cheap can be found by going to:
http://www.trademotion.com/partlocator/index.cfm?siteid=214001

Year: 2007
Make: Toyota
Model: Yaris

Electrical -> Electrical Components -> Relay -> Fog lamps

-> Fog lamps - Instrument panel - Instrument panel

[BLAZINBLUEVITZ]

SAME PART different numbers different prices. but you understand this already so we're goody.....

[IsLNdbOi]

What about the stalk / combo switch? Same part, different part numbers as well?

The part number above for the stalk / combo switch costs much more than the stalk / combo switch listed for the '07 / '08.

[BLAZINBLUEVITZ]

once again it looks like same part but different numbers and different prices.

[DerFlosser]

I will be getting some 08' sedan foglight covers from Garm but once I am done setting up the foglight wiring, I don't want to have to put my bumper back on without the correct shrouds. Can/Do the shrouds get popped on after the bumper is installed? Or, can you pop on the shrouds after the bumper is installed? This way....I can do all the work and if the 08' sedan shrouds don't fit, I can get the correct 09' shrouds and just pop them on. Anybody? :thumbsup:

[DerFlosser]

SHROUD LH: 81482-52260
SHROUD RH: 81481-52330

Also,
Are you positive that these are the 09' shroud p/n's? Thanks in advance!

[MGargano]

I have an '09 LB. If I buy this kit from Garm: http://shop.microimageonline.com/product.sc?categoryId=16&productId=111 all I would need is the LH & RH shrouds and the OEM stalk from Toyota to make it work?

[CTScott]

Also,
Are you positive that these are the 09' shroud p/n's? Thanks in advance!

He's correct - I just got my set from my dealer:

http://i372.photobucket.com/albums/oo163/ctscott329/Misc%20Yaris/FogTrim.jpg

[MGargano]

He's correct - I just got my set from my dealer:

http://i372.photobucket.com/albums/oo163/ctscott329/Misc%20Yaris/FogTrim.jpg

Which fog kit are you using for your '09?

[CTScott]

Which fog kit are you using for your '09?

The Microimage one.

[MGargano]

The Microimage one.

That's what I figured. Is it this one? http://shop.microimageonline.com/product.sc?categoryId=16&productId=111

Will this kit work with the '09 3 door LB if I get the shrouds from Toyota?

[CTScott]

That's what I figured. Is it this one? http://shop.microimageonline.com/product.sc?categoryId=16&productId=111

Will this kit work with the '09 3 door LB if I get the shrouds from Toyota?

Your link is to the sedan version - I grabbed the liftback one.

The OEM trim pieces are the only thing needed to make it work on an 09.

[MGargano]

Your link is to the sedan version - I grabbed the liftback one.

The OEM trim pieces are the only thing needed to make it work on an 09.

Thanks, that's what I was curious about. I wasn't sure if it was the sedan or liftback version that worked on the 09 so thanks for clearing it up. Any idea where I can find the OEM cruise stalk on the cheap? The dealer wants $115.18.

[DerFlosser]

Scott,
I plan on using the integrated fog light switch on the headlight stalk for total plug and play. Do you happen to know if the 08 sedan covers will fit the 09 LB? If you know for sure....I may as well go ahead and order the right ones now. :drinking:

[CTScott]

Thanks, that's what I was curious about. I wasn't sure if it was the sedan or liftback version that worked on the 09 so thanks for clearing it up. Any idea where I can find the OEM cruise stalk on the cheap? The dealer wants $115.18.

Actually, I would be that the only difference between the two is the trim, as I believe the fog wiring is identical on both.

For the cruise stalk, check this ebay auction:

http://cgi.ebay.com/ebaymotors/NEW-OEM-TOYOTA-CAMRY-05-06-07-08-CRUISE-CONTROL-SWITCH_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a1 5Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q 3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem170321992 191QQitemZ170321992191QQptZMotorsQ5fCarQ5fTruckQ5f PartsQ5fAccessories

[CTScott]

Scott,
I plan on using the integrated fog light switch on the headlight stalk for total plug and play. Do you happen to know if the 08 sedan covers will fit the 09 LB? If you know for sure....I may as well go ahead and order the right ones now. :drinking:

Initially, I thought that might be a possibility as well, but no the sedan covers are different than the 09 liftback ones.

[DerFlosser]

Initially, I thought that might be a possibility as well, but no the sedan covers are different than the 09 liftback ones.


cool...thanks for the help Scott! :smoking:

[MGargano]

Actually, I would be that the only difference between the two is the trim, as I believe the fog wiring is identical on both.

For the cruise stalk, check this ebay auction:

http://cgi.ebay.com/ebaymotors/NEW-OEM-TOYOTA-CAMRY-05-06-07-08-CRUISE-CONTROL-SWITCH_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a1 5Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q 3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem170321992 191QQitemZ170321992191QQptZMotorsQ5fCarQ5fTruckQ5f PartsQ5fAccessories

I'm retarded... I meant OEM fog light stalk, not cruise control stalk. Any ideas?

[CTScott]

I'm retarded... I meant OEM fog light stalk, not cruise control stalk. Any ideas?

I believe that you can use either the 06-08 (84140-52150) or 09 (84140-52151) versions. TRDsparks sells the 06-08 one for $77. The difference may just be in labeling like the wiper stalk I put on mine. I bought the older version of the Prius wiper stalk and it has text on it, whereas the newer version just has the symbols.

The other place to try is the junkyard that I bought my wiper stalk from (for $50 vs ~$100). http://autoworksinc.com/

[MGargano]

They also have the 09 version (84140-52151) for $92.14. Price difference is $15.20. You're the electrical genius... which switch would you use? The TRDsparks item description for the 52150 says 'combo switch w/ fog lamps' but the 52151 description only says 'SWITCH ASSY HEADLAM' so I'm worried it might not be the right one.

[CTScott]

They also have the 09 version (84140-52151) for $92.14. Price difference is $15.20. You're the electrical genius... which switch would you use? The TRDsparks item description for the 52150 says 'combo switch w/ fog lamps' but the 52151 description only says 'SWITCH ASSY HEADLAM' so I'm worried it might not be the right one.

I would go with the cheaper one (but I am cheap). The EPC shows 84140-52141 as the no-fog stalk, so you are OK with the 84140-52151.

[MGargano]

I would go with the cheaper one (but I am cheap). The EPC shows 84140-52141 as the no-fog stalk, so you are OK with the 84140-52151.

Thanks for all your help. Now I just need to order the shrouds. Is there a DIY for installing the fogs with the OEM stalk? All I found were DIYs for using the aftermarket switch.

[IsLNdbOi]

There was a great one before, but I think it was lost.

The DIY for removing the steering wheel and airbag was in the DIY for the leather wrapped steering wheel. Someone else made a separate DIY for installing the new stalk.

Can't find either thread anymore.

[mikenacarato]

man i got fed up with trying to wire all that stuff so i ended up not even using a switch or relay and wiring them to the parking lights. been working fine ever since. doesnt take a load high enough to hurt anything. toyota switch was 89 and relay was 50, so i saved myself a bit of money

[MGargano]

There was a great one before, but I think it was lost.

The DIY for removing the steering wheel and airbag was in the DIY for the leather wrapped steering wheel. Someone else made a separate DIY for installing the new stalk.

Can't find either thread anymore.

Damn. I guess there's no way to recover/repost the DIY? Kinda new to the whole forum thing.

[IsLNdbOi]

man i got fed up with trying to wire all that stuff so i ended up not even using a switch or relay and wiring them to the parking lights. been working fine ever since. doesnt take a load high enough to hurt anything. toyota switch was 89 and relay was 50, so i saved myself a bit of money

It wasn't difficult to install the fogs. The only part that stressed me out was when I had to pull the ends of the bumper cover outwards so I could place the fog lights into the shrouds.

After that it was as simple as plugging the fog lights into the right pin in the fusebox in the engine bay, plugging the relay in and removing the steering wheel to plug the new stalk in.

[DerFlosser]

It wasn't difficult to install the fogs. The only part that stressed me out was when I had to pull the ends of the bumper cover outwards so I could place the fog lights into the shrouds.


Can you expand on exactly what you mean here. I will be doing this for the first time soon and any insight would be very much appreciated. I was under the impression that installing the fogs was as easy as removing the bumper, installing the fogs and popping the covers/shrouds on last. Ofcourse, you have to hook the connectors up too but then just putting the bumper back on and the other stuff and your done. Are you saying that the lights go into the shrouds and then the shrouds go into the bumper openings? Is there a specific sequence to do this? Thanks!:thumbsup:

[mikenacarato]

i just didnt get a wiring diagram or any instructions when i ordered them. and i even got the wiring kit from garm but didnt know how to put it all together. oh well, it comes on when i wanted them too anyways so im happy :)

[IsLNdbOi]

Just another bump.

Can anyone verify the part numbers needed for the '09 5-door Liftback?

[CTScott]

New headlight stalk w/ fog light switch (combination switch):
84140-52151
or 84140-52150


Fog Light Relay:
90987-02027
or
90987-02012
(Both part numbers are the actually the same relay)


Fog Light Shroud (Left):
81482-52260

Fog Light Shroud (Right):
81482-52330

[IsLNdbOi]

Found a kit on eBay that is made for the 09/10 LBs:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150401427321

Just purchased a kit after the seller guaranteed that the kit would fit / work w/ my '09 5-door LB.

Now, before I go out and order all the other parts anyone know if the part #s have been updated?

Again, this is for an '09 5-door LB:

New stalk / combo switch w/ fog light switch:
84140-52151

--------------------------------------------------------------

For the Relay, I'm not sure if I need to purchase one. The kit I purchased looks like it comes with one, but anyway I searched ToyotaPartsCheap.com for these part #s:

90987-02027 - I got multiple hits w/ one being listed for the '07 Yaris. The price for the relay is $57.09.

90987-02012 - I didn't get any hits specifically for the Yaris. It was listed for many Toyota models from '07 and earlier and price is only $20.44.

================================================

Finally, on the '09 5-door LB, do you still connect the fog light wires to the same pins in the box in the engine bay (Where the thick red wire is connected)?
http://img252.imageshack.us/img252/1027/pict1601lo0.jpg

[CTScott]

Found a kit on eBay that is made for the 09/10 LBs:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150401427321

Just purchased a kit after the seller guaranteed that the kit would fit / work w/ my '09 5-door LB.

Now, before I go out and order all the other parts anyone know if the part #s have been updated?

Again, this is for an '09 5-door LB:

New stalk / combo switch w/ fog light switch:
84140-52151

--------------------------------------------------------------

For the Relay, I'm not sure if I need to purchase one. The kit I purchased looks like it comes with one, but anyway I searched ToyotaPartsCheap.com for these part #s:

90987-02027 - I got multiple hits w/ one being listed for the '07 Yaris. The price for the relay is $57.09.

90987-02012 - I didn't get any hits specifically for the Yaris. It was listed for many Toyota models from '07 and earlier and price is only $20.44.

================================================

Finally, on the '09 5-door LB, do you still connect the fog light wires to the same pins in the box in the engine bay (Where the thick red wire is connected)?
http://img252.imageshack.us/img252/1027/pict1601lo0.jpg


That is all correct. As for the relays, both part numbers function identically. One superseded the other. You can find them on eBay for under $10.

[IsLNdbOi]

Thanks again CTScott. The ebay auction for the fog light kit I purchased shows this picture:

http://img109.imageshack.us/img109/6025/t0018002.jpg

I circled something in red that looks like the relay. What do you think?

[CTScott]

Thanks again CTScott. The ebay auction for the fog light kit I purchased shows this picture:

http://img109.imageshack.us/img109/6025/t0018002.jpg

I circled something in red that looks like the relay. What do you think?

That's just a standard automotive relay. The Toyota one is much smaller and is blue.

[r3b3l]

Is there a choice to go with either the stalk with fog controls or the fog lamp switch that comes in the kit?

[CTScott]

Is there a choice to go with either the stalk with fog controls or the fog lamp switch that comes in the kit?

Sure. With any kit you can do it either way. Like Garm's kit though, you'll have to do some snipping of the included wiring.

[1NZYaris1]

If you are using Garms Kit or any Ebay Kit
you need to do the following .
and if you want to use the Fog Light Stalk on the Steering Wheel
no wiring need s to be done inside the cabin

Garms Kit comes with the new relay in the picture and the little Red
lead that plugs into the under bonnet fuse box
the pics below are what i did to Garms Kit .:thumbsup:

[IsLNdbOi]

Is there any harm in installing parts as they come?

I get the new stalk today and the relay on Tuesday next week. The fog lights are coming from Taiwan so I'll have those in a week or two.

I don't want to wait until I have everything so I don't end up with one big install.

[CTScott]

Is there any harm in installing parts as they come?

I get the new stalk today and the relay on Tuesday next week. The fog lights are coming from Taiwan so I'll have those in a week or two.

I don't want to wait until I have everything so I don't end up with one big install.

No problem with doing it piece by piece. Each of the three is part of a series circuit (so to speak), so until all three are in place it's an open circuit.

[IsLNdbOi]

There used to be some threads here on YW w/ pictures on removing the steering wheel, the stock stalk and then replacing the stalk w/ a new one. Can't find those threads anymore.

Anyone have links to or have the pics. from those threads?

[CTScott]

There used to be some threads here on YW w/ pictures on removing the steering wheel, the stock stalk and then replacing the stalk w/ a new one. Can't find those threads anymore.

Anyone have links to or have the pics. from those threads?

Take a look through the cruise control threads. I believe in one of them that there are some good pics of removing the steering wheel.

[1NZYaris1]

There used to be some threads here on YW w/ pictures on removing the steering wheel, the stock stalk and then replacing the stalk w/ a new one. Can't find those threads anymore.

Anyone have links to or have the pics. from those threads?

Here you go here is the toyota PDF
for Steering wheel fitting /Removing :thumbsup:

[IsLNdbOi]

Thanks guys. The part of the process I'm actually looking for is removal of the original combination switch and installation of the new one w/ the fog light control.

[CTScott]

Thanks guys. The part of the process I'm actually looking for is removal of the original combination switch and installation of the new one w/ the fog light control.

That's the easy part. Once the wheel is off, there are just two plastic tabs that hold the switch. You release those and pop the connector.

[IsLNdbOi]

Got the fog light kit yesterday and I'm not happy with it. On my '07 LB, each fog light mounting hole / spot had two slits where the tabs on each fog light would slide into while the other side would be screwed in.

http://img210.imageshack.us/img210/3696/tabst.jpghttp://img191.imageshack.us/img191/7481/screw.jpg


So, the fog lights for the '07 would have two tabs on each side. On my '09 5-door LB, each fog light mounting hole / spot has one slit where a tab on each fog light should go. The fog lights that came with this kit has two tabs on each side just like the ones for the '07 / '08 LB. For them to fit properly, they should have only one tab on each side. The tab on one side would insert into the slit on the mounting hole and the tab on the opposite side would be screwed into the screw hole on the mounting hole. So, once I installed these fog lights there was a noticeable gap b/w the lights and the bumper. Also, the top edge of the fog bezels pop out a little bit so there's a slight gap b/w the top edge of the bezels and the bumper. I already checked and all the tabs are pushed all the way in, securing the bezels. I don't recommend this kit.

[cali yaris]

I believe the gap is common to all, not just the 2009 and up.

[spookz]

The tiny gap is probably so that the heat from the foglamp glass doesn't melt the bezel plastic..

As for the tiny gap on the top edge of the bezel and the bumper, that's normal. I have genuine '09 bezels and they too leave a tiny gap.

[IsLNdbOi]

I don't remember there being gaps like this on my '07 LB. Here are some quick pics. I took:

http://img13.imageshack.us/img13/696/gapspassside.png

http://img10.imageshack.us/img10/9792/gapsdriverside.png

[Revsson]

I believe that you can use either the 06-08 (84140-52150) or 09 (84140-52151) versions. TRDsparks sells the 06-08 one for $77. The difference may just be in labeling like the wiper stalk I put on mine. I bought the older version of the Prius wiper stalk and it has text on it, whereas the newer version just has the symbols.

The other place to try is the junkyard that I bought my wiper stalk from (for $50 vs ~$100). http://autoworksinc.com/

Hey CTScott -
Sorry to dredge up an older post, but when you ordered from this junkyard,
did you specify the part number or just the Prius wiper stalk with fog switch? :iono:

I don't know if I have the guts to take off the steering wheel to do this, :frown:
but that junkyard isn't too far from me, and I have a buddy that lives in the
Madison,WI area. I ordered the fog light kit from Garm, and might just put
the switch that comes in the kit for now.

[CTScott]

Hey CTScott -
Sorry to dredge up an older post, but when you ordered from this junkyard,
did you specify the part number or just the Prius wiper stalk with fog switch? :iono:

I don't know if I have the guts to take off the steering wheel to do this, :frown:
but that junkyard isn't too far from me, and I have a buddy that lives in the
Madison,WI area. I ordered the fog light kit from Garm, and might just put
the switch that comes in the kit for now.

He had the part number listed, so I checked that out. The Prius wiper stalk works on the Yaris, but the headlight stalk does not, as it has different connectors.

[mari]

STALK: 84140-52151
RELAY: 90080-87026
SHROUD LH: 81482-52260
SHROUD RH: 81481-52330

I want foglights on my 2010 Sedan, and want to confirm these part numbers are also valid for my car.

Oh, and is there an OEM toyota part number for the foglight wiring harness? I assume that with the new foglight stalk, there is no need for an interior wiring harness.

[1NZYaris1]

I want foglights on my 2010 Sedan, and want to confirm these part numbers are also valid for my car.

Oh, and is there an OEM toyota part number for the foglight wiring harness? I assume that with the new foglight stalk, there is no need for an interior wiring harness.

Ifyou get the latest kit from Micro Image (a sponsor of this site )
everything is in the kit apart from the OEM Stalk
which is not required , and the whole kit is nplug and play :thumbsup:

[mari]

thanks... kit price is excellent for the wires and covers, but I like the oem stalk (its only $90 online!) and my own lights (visionx solstice LEDs).

[SimTronik]

Just installed my fog light kit and i just noticed gaps like that. Do i need to order the original toyota bezel? Very disapointed. Help!


I don't remember there being gaps like this on my '07 LB. Here are some quick pics. I took:

http://img13.imageshack.us/img13/696/gapspassside.png

http://img10.imageshack.us/img10/9792/gapsdriverside.png

[CTScott]

My genuine Toyota ones fit properly around the outside, but have the same gap around the lens (which may be intentional to avoid melting the plastic).

[SimTronik]

Where can i get some genuine ones. are they expensive? Only the bezel.

[CTScott]

Where can i get some genuine ones. are they expensive? Only the bezel.

Read above in the thread for the part numbers. They are about $26 each from your local dealer.

[chrisj]

I got the MI kit for my '09 and had them professionally installed. There is the slight gap right above the fog light bezel on each light.

[1NZYaris1]

:eyebulge: I have sold 2 09 hatch MI kits to my local toyota branch
and they are stoked , with quality and fitment :thumbup:.

[thaonguyen]

i did everything in the directions and it wont seem to turn on :( when i look at where the connector plugs into there doesnt seem to be anything that even plugs into the yellow wire so could something be wrong? or could i just buy the oem switch and ill have nothing to worry about?