shift knob?

[Creeper]

Im looking for a black and red non carbon fiber shift knob for the A/T. does one even exsist? cant seem to locate one anywhere

[eTiMaGo]

there's a TRD one that's quite nice...

http://images.kenorderonline8.multiply.com/image/1/photos/48/600x600/2/310254911532-112-resize.jpg?et=Pyz9itj21OTo3LP3t67ofw&nmid=230573783

Should be able to find it on eBay...

[Creeper]

thats exactly what I was looking for, guess is skimmed past it on ebay THANKS!

[MadMax]

Be sure to get the right one, my Peach State friend!

The auto is an M8x1.25 shaft, which is quite a bit harder to find as it is smaller than the manual, which is M12x1.25.

Cheers! M2

[Meteorite_Marty]

there's a TRD one that's quite nice...

http://images.kenorderonline8.multiply.com/image/1/photos/48/600x600/2/310254911532-112-resize.jpg?et=Pyz9itj21OTo3LP3t67ofw&nmid=230573783

Should be able to find it on eBay...

Sorry, looks like a baseball. :)

[awsumwun]

base ball innnndddeeeeeeed

[Reeves360]

I like the shape of this one and the TRD badge on the side.

[Sparks Toyota-TRD]

Another thing is you can go to your local hardware store and by a spacer to go from 12mm to 8 mm!


Tim

[A-tron]

i think it would be rad if it was more like a baseball. Like white and red that would be hot. and you could get a matching stearing wheel......and make your seat into a baseball mit.... ok enuf of me ranting lol. but i still say white with red is a rad idea.

[9vapors]

I have this one... http://toyotapartspeople.com/images/Toyota/TRD_Ball_Shift.jpg

[MadMax]

i think it would be rad if it was more like a baseball. Like white and red that would be hot. and you could get a matching stearing wheel......and make your seat into a baseball mit.... ok enuf of me ranting lol. but i still say white with red is a rad idea.

Actually, I drilled out a baseball and tapped threads into it to see how it would work as a shift knob (I had done a golf ball previously (http://www.yarisworld.com/forums/showthread.php?t=14351)).

It turned out pretty cool but was just a tad too big to be a shifter. The golf balls were a tad too small, and I ended up with an OBX speed star shift knob on it which was "just right!" (Sounds a bit like a Goldilocks and the Three Bears story, doesn't it?!? :w00t:)

Cheers! M2

[JonS]

Hey, eTiMaGo,
Do you happen to know a source for that shift knob? I've looked all over the net and can't find it. The manual knobs are common, but that one seems to be quite scarce.

Thanks

[MadMax]

As Tim stated, you can always use a manual shift knob, all you need is the spacer to go from 12mm to 8 mm...

Mine is like this, and you would never know the difference.

Cheers! M2

[CTScott]

Hey, eTiMaGo,
Do you happen to know a source for that shift knob? I've looked all over the net and can't find it. The manual knobs are common, but that one seems to be quite scarce.

Thanks

+1

I've looked high and low for that perforated leather one since eTiMago posted the pic. That's the only perf one I've seen.

[eTiMaGo]

I *think* I got the pic from a local forum, i'll dig into it :smile: