PDA

View Full Version : Crazy 06 STi

Russelt3hPirate
04-29-2009, 07:40 PM
How To Be Aggressive Version 2.0 (http://t3hclap.com/archives/93)

http://t3hclap.com/Photos/Feature/Bill/2/BillTE3722mm1.jpg

18x9.5 +22mm TE37s, imagine those on a Yaris.

someone needs to do a 5x114.3 swap from an xB! :w00t:
mikenacarato
04-29-2009, 07:47 PM
why dont you just get 4x100 TE37s
Russelt3hPirate
04-29-2009, 07:49 PM
why dont you just get 4x100 TE37s

they don't come in anything wider than a 7"

:(

plus they are no where near as concave.

then again 9.5" wheels on a yaris is probably a little excessive/pointless (especially an 18) :bellyroll:
Gideon
04-30-2009, 12:06 AM
SSR's SP1s come in 16x9, with 4x100 I believe.

Or MS1s, which I like the look of more.
Mouse
04-30-2009, 12:29 AM
Not true...you can get them in 14x6.5 +15 offset in 4x100 and gives you the concave look or go with the rota grids in a low offset.
Russelt3hPirate
04-30-2009, 11:23 AM
Not true...you can get them in 14x6.5 +15 offset in 4x100 and gives you the concave look or go with the rota grids in a low offset.

note, i said wider than 7". :)
Russelt3hPirate
04-30-2009, 11:24 AM
SSR's SP1s come in 16x9, with 4x100 I believe.

Or MS1s, which I like the look of more.

any 2/3 piece wheel is easy to get wide for 5x100.

forged monoblock wheels don't tend to go wider than 7"s for 4x100, unless you get the custom or find a place willing to order 15 sets. :)
Mouse
04-30-2009, 11:48 AM
I know what you said but you want the concave look and that 's the only size in 4x100 that you can get that look. Unless you can convert your hubs to 4x114.3 then you can get the low offsets that you're looking for. You can also try the TE37 Cups but it doesn't look the same.


http://clubroadster.net/forum/viewtopic.php?t=24944&highlight=te37
Russelt3hPirate
04-30-2009, 11:57 AM
I know what you said but you want the concave look and that 's the only size in 4x100 that you can get that look. Unless you can convert your hubs to 4x114.3 then you can get the low offsets that you're looking for. You can also try the TE37 Cups but it doesn't look the same.


http://clubroadster.net/forum/viewtopic.php?t=24944&highlight=te37

I'm familiar with what's available.

I should've put the preferences in order,

TE37s, more than 7" wide, concave if possible.

the concave look isn't required, the wheel and width come first. :)

I wonder if the xB hubs would work, anyone familiar with both the new xB and Yaris to be able to tell off the top of their head? (this might be too technical for OT....haha).

my RE30's have the S3 face and are mildly concave, can't get crazy concave on a 7" wheel with a +35mm offset. haha.
Gideon
04-30-2009, 02:37 PM
any 2/3 piece wheel is easy to get wide for 5x100.

forged monoblock wheels don't tend to go wider than 7"s for 4x100, unless you get the custom or find a place willing to order 15 sets. :)

Ohhhhh, you want a forged monoblock wheel. Thought you were looking for just the widest 15-16" wheel.

Well.... the SSRs are HEAVY, so they're probably just as strong, right? :laugh:
Russelt3hPirate
04-30-2009, 03:04 PM
:bellyroll: weight = strength !! :bellyroll:
PETERPOOP
04-30-2009, 03:11 PM
love that car
Mouse
04-30-2009, 04:08 PM
How about Work Meister S1....here is the size chart

http://www.workwheelsusa.com/media/wheels/29/84/Meister%20S1%202P%20Spec.pdf
Russelt3hPirate
04-30-2009, 04:22 PM
How about Work Meister S1....here is the size chart

http://www.workwheelsusa.com/media/wheels/29/84/Meister%20S1%202P%20Spec.pdf

It's an option, I've considered them in a 15x9 Polished.

but once again they aren't monoblock or forged.

Unless I swap to 5x114.3 I don't think I'll find it.

Unless I order 10 sets and have them make the special size for me. :clap:

then I'd be stuck with a lot of 15x9 4x100 TE37s...haha...hmm might not be a bad idea.
Mouse
04-30-2009, 04:35 PM
You can get the 949racing 6UL's in 15x8 and 15x9 +36 offset. They are not forged but still light and cheap.

http://www.949racing.com/index.asp?PageAction=VIEWCATS&Category=2
Russelt3hPirate
04-30-2009, 04:38 PM
You can get the 949racing 6UL's in 15x8 and 15x9 +36 offset. They are not forged but still light and cheap.

http://www.949racing.com/index.asp?PageAction=VIEWCATS&Category=2

familiar with those as well. :smile:

They are also an option, need to figure out if the offset is low enough for front coilover clearance though.

guess I'm back in the search, that 06 is hot though. :D