PDA

View Full Version : Dang our pcv systems sure do like to suck up oil!!!


YarisSedan
04-29-2009, 09:40 PM
Okay so i installed a oil catch can using the home made home depo filter.

After about 2 weeks i can already see a teaspoon of oil. I am figuring the way things are going the filter should be completely full by the time its due for another oil change. Cant belive how much oil is going into the intake.

I cant imagine without this mod how much oil buildup residue is going to be coating the intake, valves etc.

For the cheap cost and if you dont mind emptying the oil it catches every few months i would highly reccomend this for all members.

http://www.jasonlabar.com/yarisforums/oilcatch.jpg

LtNoogie
04-29-2009, 09:44 PM
That's why I have to install my catch can. That oil is coating the inside of my S/C and I'm not sure how to clean it.

YarisSedan
04-29-2009, 09:45 PM
1 word SEAFOAM!!!

LtNoogie
04-29-2009, 09:51 PM
I'm too lazy to search while I'm at work. Where is the Seafoam introduced? In front of the throttle body?

YarisSedan
04-29-2009, 09:55 PM
Behind the throttle usually. You can even take the tube of the pcv valve and get a areosal version of seafoam and spray it down. Will clean all the oil and carbon buildup off your intake manifold as well as clean your valves and any carbon buildup in the motor.

LtNoogie
04-29-2009, 10:01 PM
Ok, I'll look into that this weekend. Thanks.

mikenacarato
04-29-2009, 10:02 PM
does the catch can go on the line that goes from valve cover to intake, or pcv valve to manifold?

YarisSedan
04-29-2009, 11:12 PM
pcv to manifold. Maybe ill install a second one to intake but i dont think that sucks hardly any oil at all.

mikenacarato
04-29-2009, 11:13 PM
ok, ive had a can i was going to use on another car but why not put it on the yaris.

YarisSedan
04-29-2009, 11:19 PM
best way is to let it suck in about half a can slowly. Then shut the car off and let it soak for a hour. Then run the other half to clean out the soften carbon and gunk. Then the car will smoke like something fierce.

hatchbackkid82
04-30-2009, 08:37 AM
where is the DIY for the catch can?

BailOut
04-30-2009, 10:12 AM
where is the DIY for the catch can?

http://www.yarisworld.com/forums/showthread.php?t=5294

kenkyd
04-30-2009, 08:20 PM
in the diy, the husky filter, do they not make it anymore? i search google and cant find one.

but wtffffff, i went to walmart, 2 home depots, lowes, hectors hardware, 2 sears stores, and a sears hardware. NO ONE has this type of filter at all. other than online where should i go?

TheSilkySmooth
05-03-2009, 07:54 PM
I think the engine needs some top oil going on the valve stems at cyl top. Maybe you got too much oil in your engine. I only put 3.5-3.75 Qt and have zero oil usage.

PHXDEMON
05-03-2009, 09:03 PM
I think the engine needs some top oil going on the valve stems at cyl top. Maybe you got too much oil in your engine. I only put 3.5-3.75 Qt and have zero oil usage.

Damn. 3 qts fills my oil up within range :iono:

Adriaan
05-04-2009, 02:51 AM
hey kenkyd, home depot has it but by a differnet company. At home depot there in the air compressor section. Just take a photo of it, since they'll have no idea what your talking about with out it.

TheSilkySmooth
05-04-2009, 09:37 AM
Damn. 3 qts fills my oil up within range :iono:
You must not be draining it all out:eek: Dont use ramps and make sure the drain plug is tilting to the downhill if you car is not on a perfectly flat driveway:wink: