lug nutz

[mastaofdisasta]

So i just ordered 15x6.5 rota attack wheels and df210s. Anyone know if im going to need aftermarket lugs, and if so what kind is recomended?

[schleppy]

I would say you probably will. I picked up a set of black aftermarket tuner lugs from autozone, and they just BARELY fit.

If you search ebay for 12x1.5 lugs (pick a color) you'll find what you need.

[MPC Motorsports]

Buy your lugs from the same place you get your wheels. They will know what fits. I got new wheels for my daughters's xB last month from Discount Tire and did not buy aftermarket lugs since I already had them on the car since I was replacing damaged wheels. Well, the existing lugs were too short for the new rims. Had to buy new lugs anyway.

[Russelt3hPirate]

do not cheap out on lug nuts.

you can get a middle road set for ~$50.

I really really like kyokugen 7 sided ones but they stopped making them.

Mutkei has a spline drive set that should work in the Rotas.

you will most likely need a 17mm hex set (not 19 or 21).

[Taiyaki]

If you search ebay for 12x1.5 lugs (pick a color) you'll find what you need.

So any 12x1.5mm lug will work with any rota wheel? Im pretty new to this kind of thing. and still dont fully understand what lug fits what wheel

[Russelt3hPirate]

No, you'll need "tuner" sized lugs which are a 17mm hex not a 19mm hex.

[ROCKLAND TOYOTA]

buy from here:
http://www.jlbmotorsports.com/rims/lugnuts-list.html

[Taiyaki]

^So will the muteki, SR35, and or Gorilla closed end (red) in the link above work with rota subzero? it doesnt say if its 17mm.

Thanks

[battleversiontc]

taiyaki go rons performance cuz they sell lugs ive ran pretty much every rim with theres if you still doubt it take one rim down and they will find one that matches and there pretty cheap and there lugs are good

[Russelt3hPirate]

^So will the muteki, SR35, and or Gorilla closed end (red) in the link above work with rota subzero? it doesnt say if its 17mm.

Thanks

the SR35 is 19mm

the Muteki spline drive should fit.

[severous01]

mcguard...they have anything you could want. shallow, deep, chrome, anodized, 'tuner' or tight fit...capped, open, stainless, titanium, magnesium, locks, lugs, whatever you want.

and they're lifetime guaranteed if you dont use power tools on them

[bearda]

mcguard...they have anything you could want. shallow, deep, chrome, anodized, 'tuner' or tight fit...capped, open, stainless, titanium, magnesium, locks, lugs, whatever you want.

and they're lifetime guaranteed if you dont use power tools on them

+1. McGard's spline drive tuner lugs seem to be much sturdier than any of the gorillas or mutekis I've seen.

[mastaofdisasta]

purple lugs on bronze wheels? Win or Fail?

[Taiyaki]

taiyaki go rons performance cuz they sell lugs ive ran pretty much every rim with theres if you still doubt it take one rim down and they will find one that matches and there pretty cheap and there lugs are good
Cool ill hit up Ron's see what kind of lugs they have. Hope not too expensive.