PDA

View Full Version : my knockoff-rota thread. ask Tamago!


Tamago
05-15-2009, 02:12 PM
ask tamago anything!

i am not guaranteeing my answers to be 100% correct

cali yaris
05-15-2009, 02:18 PM
LOL. What are you doing to your car now that you took off the turbo kit?

33OH
05-15-2009, 02:22 PM
Let me even ask you a question about Rota's: what should I search for to find a wheel similar to this design? (i.e. ebay, craigslist, classifieds..) :biggrin:

http://jlbmotorsports.com/rims/rotapics/rb_5.jpg

ROCKLAND TOYOTA
05-15-2009, 02:39 PM
i have tein springs and 205-55-15 dunlops. 15x? and what offset are i looking for......

jclo3313
05-15-2009, 02:41 PM
What finishes do they come in?

33OH
05-15-2009, 02:52 PM
http://jlbmotorsports.com/rims/rota-list.html

About 3/4 of the way down. Rota RB's.

Tamago
05-15-2009, 03:31 PM
LOL. What are you doing to your car now that you took off the turbo kit?

it's for sale.

but most likely going to big power, 15X9's and some nice sticky rubber.

Tamago
05-15-2009, 03:31 PM
Let me even ask you a question about Rota's: what should I search for to find a wheel similar to this design? (i.e. ebay, craigslist, classifieds..) :biggrin:

http://jlbmotorsports.com/rims/rotapics/rb_5.jpg

Rota RB
Konig Rewind
Panasport replica

Tamago
05-15-2009, 03:32 PM
i have tein springs and 205-55-15 dunlops. 15x? and what offset are i looking for......

15X7, +35 will be fine. minimal rubbing will occur that can be solved with a heatgun to the bumps in your fender liners.

ROCKLAND TOYOTA
05-15-2009, 03:38 PM
15X7, +35 will be fine. minimal rubbing will occur that can be solved with a heatgun to the bumps in your fender liners.

i have scion xa/xb 10 spoke wheels 15x?. whats those specs and will they work in my situation.

Nexus1155
05-15-2009, 03:41 PM
Tamago I have K16 turbos on a 2.7L Engine, These turbos were meant to go on a 3.6L 997 Porsche

When do you think I will getting full boost by and how much power do you think i will make at 21psi

here is the map for good reference or a k16 map that is

http://www.sjmautotechnik.com/parts_products/turbo/k16.GIF

Tamago
05-15-2009, 03:41 PM
i have scion xa/xb 10 spoke wheels 15x?. whats those specs and will they work in my situation.

15x6 most likely

they'll work fine..

buy 20mm spacers for the rear

Tamago
05-15-2009, 03:42 PM
Tamago I have K16 turbos on a 2.7L Engine, These turbos were meant to go on a 3.6L 997 Porsche

When do you think I will getting full boost by and how much power do you think i will make at 21psi

here is the map for good reference or a k16 map that is

http://www.sjmautotechnik.com/parts_products/turbo/k16.GIF

wow that's hard to read.

what is the compression ratio of each engine, how will the charge air be cooled, and what are your injector sizes?

ROCKLAND TOYOTA
05-15-2009, 03:44 PM
15x6 most likely

they'll work fine..

buy 20mm spacers for the rear

will your 30's be too much?

Tamago
05-15-2009, 03:45 PM
will your 30's be too much?

my 30's?

33OH
05-15-2009, 03:52 PM
Rota RB
Konig Rewind
Panasport replica

Thank you sir! :w00t:

ROCKLAND TOYOTA
05-15-2009, 03:53 PM
my 30's?

weren't you polling to see if anyone was interested in 10 or 30mm spacers from you? also are spaces good with autocrossing.....

Tamago
05-15-2009, 03:54 PM
weren't you polling to see if anyone was interested in 10 or 30mm spacers from you? also are spaces good with autocrossing.....

that's 10 and 13
http://www.yarisworld.com/forums/showthread.php?t=17168&highlight=hub+spacers

they'll be released for sale by the first of june.

with that wheel/tire package, you could easily run 13MM

they are great with autocrossing, are a great "in addition to" mod when doing a swaybar.

Tamago
05-15-2009, 03:55 PM
Thank you sir! :w00t:

also check www.superlite-wheels.com

ROCKLAND TOYOTA
05-15-2009, 03:57 PM
that's 10 and 13

they'll be released for sale by the first of june.

they are great with autocrossing, are a great "in addition to" mod when doing a swaybar.

WOW, what was i smoking that that day. what color should i paint those scion wheels or should i leave them as is?

Tamago
05-15-2009, 03:58 PM
what color should i paint those scion wheels or should i leave them as is?

that is not a question to be asked in this thread. save it for when peterpoop makes one :laugh::laugh:

ROCKLAND TOYOTA
05-15-2009, 04:05 PM
that is not a question to be asked in this thread. save it for when peterpoop makes one :laugh::laugh:

:laugh: NICE, thanks for the help.....

Russelt3hPirate
05-15-2009, 04:13 PM
Rota RB
Konig Rewind
Panasport replica

no reason not to go real deal. ;)

http://www.panasport.com/street.html

Russelt3hPirate
05-15-2009, 04:14 PM
tamago, if I wanted to convert to xB 5x114.3 what would I have to do?

Tamago
05-15-2009, 04:15 PM
tamago, if I wanted to convert to xB 5x114.3 what would I have to do?

just kidding.


you'd need the following parts...

2EA 510063
2EA 512311

Thirty-Nine
05-15-2009, 04:18 PM
no reason not to go real deal. ;)

http://www.panasport.com/street.html

Panasports are knock-offs of the Minilite.

http://www.minilitewheels.com/

Russelt3hPirate
05-15-2009, 04:20 PM
Panasports are knock-offs of the Minilite.

http://www.minilitewheels.com/

oh snap. :bellyroll:, knocking off knock offs. :eek:

33OH
05-15-2009, 04:30 PM
no reason not to go real deal. ;)

http://www.panasport.com/street.html

Kind of is a reason. Can't seem to sell my Ray's for anything. Can't even find anyone to trade for Rotas, lol. :laugh:

Russelt3hPirate
05-15-2009, 04:32 PM
Kind of is a reason. Can't seem to sell my Ray's for anything. Can't even find anyone to trade for Rotas, lol. :laugh:

G-Games yo!!

be proud of the model line. :)

ROCKLAND TOYOTA
05-15-2009, 04:32 PM
Kind of is a reason. Can't seem to sell my Ray's for anything. Can't even find anyone to trade for Rotas, lol. :laugh:

17's came out in 1997 i think. i was first to have 17 inch konig impacts on my del sol back then. broke necks like nobody's business. problem is there so common now no one wants to spend big money on them......

33OH
05-15-2009, 04:33 PM
G-Games yo!!

be proud of the model line. :)

Ray's G-games 77W, lol. But yeah.. :cry:

33OH
05-15-2009, 04:34 PM
17's came out in 1997 i think. i was first to have 17 inch konig impacts on my del sol back then. broke necks like nobody's business. problem is there so common now no one wants to spend big money on them......

I'm only asking $750 for rims and tires that were purchased for $2850 last year. And have low miles on them, only ran last summer and a little this spring.

ROCKLAND TOYOTA
05-15-2009, 04:35 PM
nice wheels but 750 buys a new set of knockoff's.....

Tamago
05-15-2009, 04:36 PM
I'm only asking $750 for rims and tires that were purchased for $2850 last year. And have low miles on them, only ran last summer and a little this spring.

have we learned our lesson about spending lots of money on "name brand" wheels?

33OH
05-15-2009, 04:36 PM
have we learned our lesson about spending lots of money on "name brand" wheels?

Oh, I didn't spend the money. The dude I bought them off of did. I got a hell of a deal. :biggrin:

Tamago
05-15-2009, 04:45 PM
I'm only asking $750 for rims and tires that were purchased for $2850 last year. And have low miles on them, only ran last summer and a little this spring.

Oh, I didn't spend the money. The dude I bought them off of did. I got a hell of a deal. :biggrin:

ah, sounds deceptive!

33OH
05-15-2009, 04:47 PM
ah, sounds deceptive!

The guy who purchased them bought them for $2850 last year, not me. I just picked them up a few months ago, February or March-ish.

Tamago
05-15-2009, 04:47 PM
ok, moving forward, more questions.

33OH
05-15-2009, 04:48 PM
Okay sorry.

Question: In relativity to other 17" rims, is 17 lbs. each a decent weight?

Nexus1155
05-15-2009, 04:51 PM
Compression ratio is 9.3:1 and the air will be cooled via FMIC which keeps a lower Delta IAT than the other aftermarket ones. Fuel will be shot into it with 60# (770cc?) injectors

Tamago
05-15-2009, 04:51 PM
Okay sorry.

Question: In relativity to other 17" rims, is 17 lbs. each a decent weight?

depending on offset, 17lbs for a 17X7 is acceptable for a wheel.

Tamago
05-15-2009, 04:52 PM
Compression ratio is 9.3:1 and the air will be cooled via FMIC which keeps a lower Delta IAT than the other aftermarket ones. Fuel will be shot into it with 60# (770cc?) injectors

435hp at the crank

33OH
05-15-2009, 04:54 PM
depending on offset, 17lbs for a 17X7 is acceptable for a wheel.

ET42, but you kinda already answered. Thanks again. :headbang:

ROCKLAND TOYOTA
05-15-2009, 04:54 PM
weight of scion xa 10 spoke 15 inch wheel

Nexus1155
05-15-2009, 04:55 PM
whatttt no way K04's make that much whp and the compressor and exhaust is like 2x the size!

edit - http://www.nogaroblue.com/turbo/TurboWheels.jpg

Tamago
05-15-2009, 04:57 PM
weight of scion xa 10 spoke 15 inch wheel

16.5lbs

haha i have no idea.

ROCKLAND TOYOTA
05-20-2009, 11:11 AM
can i do autocross running 18 inch wheels??

Tamago
05-20-2009, 11:20 AM
can i do autocross running 18 inch wheels??

you CAN do anything you want. you can even go on a diet to lose weight, it'll make the car faster :clap:

ROCKLAND TOYOTA
05-20-2009, 11:34 AM
you CAN do anything you want. you can even go on a diet to lose weight, it'll make the car faster :clap:

I SEE this thread is overwith......

Mouse
05-20-2009, 11:53 AM
I thought all those wheels were knockoffs of the Watanabes
http://www.watanabewheel.com/