PDA

View Full Version : Megan exhaust question


MGargano
05-15-2009, 11:25 PM
I just finished installing a Megan exhaust on my 09 LB and am having a problem with it knocking against the coil spring plate at idle. Anyone else have this problem and/or know of a solution?

thebarber
05-15-2009, 11:28 PM
didnt have that problem....

is the connector at the axle connected perfectly inline w/ the midpipe?

take some pics...

MGargano
05-16-2009, 02:41 AM
Yes it seems to be lined/bolted up perfectly with the mid-pipe but no matter how I adjust the hangers so it won't hit, it seems to drift back into place after a few minutes of driving and starts to rattle against the spring plate again. Should I try bending the hangers on the muffler?

thebarber
05-16-2009, 06:16 PM
seems like you might need to

have pics?

BaknBlak
05-16-2009, 07:03 PM
You might want to take it to a muffler shop and have them weld a bracket to pull it over to the left just a hair. I had that same problem. It tapped just at Idle. A $50.00 weld job fixed it for me. Don't pull it too far or your exhaust will be crooked. I was told when I bought it that if my car was lowered it'd tap, and it did. Shop around for prices, one quote I got was for $100.00. Hope this helps.

cst
10-29-2009, 11:09 PM
I have the Megan knock too, but not at idle, only on rough road. Inlet pipe hits the lower spring cup. I used a rubber bungee to pull the front hanger over to the drivers side. Hooks go round bracket underneath in middle. Called Megan - they said they didn't know of any issues with this install. I told them I'd email them some pics (if it ever stops raining). Other than the fit problem love the sound and car is surely quicker. 09' LB

Mr Yarisman
10-30-2009, 12:12 AM
I have the Megan knock too, but not at idle, only on rough road. Inlet pipe hits the lower spring cup. I used a rubber bungee to pull the front hanger over to the drivers side. Hooks go round bracket underneath in middle. Called Megan - they said they didn't know of any issues with this install. I told them I'd email them some pics (if it ever stops raining). Other than the fit problem love the sound and car is surely quicker. 09' LB
:smile:
How's the sound on this Megan exhaust is it loud or deep?

thebarber
10-30-2009, 06:20 AM
megan axleback w/ custom midpipe (note: it IS louder w/ the larger midpipe vs stock)

http://i22.photobucket.com/albums/b339/dabarber/yaris/midpipe/th_100_6837.jpg (http://s22.photobucket.com/albums/b339/dabarber/yaris/midpipe/?action=view&current=100_6837.flv)

http://i22.photobucket.com/albums/b339/dabarber/yaris/dyno/th_thebarberdyno03.jpg (http://s22.photobucket.com/albums/b339/dabarber/yaris/dyno/?action=view&current=thebarberdyno03.flv)

thebarber
11-24-2009, 07:31 AM
im on eibach prokits now and i find on turns the megan muffler will swing and hit the coil spring on the passenger side in the rear.....

i was puting on my winter wheels/tires last night and could clearly see a shiny rub-mark on my otherwise filthy muffler...

Indianspringsaz
11-24-2009, 09:03 AM
NICE

daddz07
03-13-2014, 11:43 AM
Oh well after 5 years and paid my car, I started dressing it up. About this same issue with megan, it is a great exhaust but that vibration that you can hear inside is loud..I felt like a harley davidson bike is standing at the back of my car that is idling. Any idea what to do..???

white_rice
03-14-2014, 06:14 AM
I also wasn't a fan of the Megan exhaust due to the single exhaust hanger only on the one side causing the muffler to hang slightly angled.

daddz07
03-18-2014, 04:23 PM
I also wasn't a fan of the Megan exhaust due to the single exhaust hanger only on the one side causing the muffler to hang slightly angled.

You are right...me too after I have it..I wanna smash it...the design sucks..I should go with DC sport.