PDA

View Full Version : fog lights


rihdrkc
05-18-2009, 07:25 PM
Are there any fog light kits available for a 2009 3dr liftback? Will the ones for 07-08 fit?

MGargano
05-18-2009, 07:37 PM
Are there any fog light kits available for a 2009 3dr liftback? Will the ones for 07-08 fit?

Yes, the 06-08's fit but you need to get the shrouds for the 09. TRDSparks has them: RH- 8148152330 & LH- 8148252260. I used the Micro Image 06-08 LB fogs with these shrouds and the fit is perfect.

rihdrkc
05-18-2009, 09:44 PM
Thank you for the info

DerFlosser
05-19-2009, 09:55 AM
If you search...there is a host of information.

regal
06-01-2009, 02:14 PM
these are the wrong part numbers don't waste your money

CTScott
06-01-2009, 03:07 PM
these are the wrong part numbers don't waste your money

Actually, the part numbers above are correct. Here is a picture of mine, when they were still in the package with the part numbers:

24615

IsLNdbOi
06-01-2009, 03:30 PM
I'm guessing no one sells a kit yet that comes w/ everything for the '09?...

CTScott
06-01-2009, 03:34 PM
I'm guessing no one sells a kit yet that comes w/ everything for the '09?...

Not yet, and the Toyota plastic parts are highway robbery at $28 each from the dealer. I was highly tempted to just drill out the OEM trim pieces.

1NZYaris1
06-01-2009, 07:20 PM
Not yet, and the Toyota plastic parts are highway robbery at $28 each from the dealer. I was highly tempted to just drill out the OEM trim pieces.

Are you sure the 07-08 sedan shroud's won't fit , in the 09 hatch back .
The look exactly the same just different part number's :iono:

CTScott
06-01-2009, 07:23 PM
Are you sure the 07-08 sedan shroud's won't fit , in the 09 hatch back .
The look exactly the same just different part number's :iono:

No. They are close, but definitely a different shape.

regal
06-02-2009, 02:41 AM
If you order those part numbers from Sparks you will get covers without holes for the lamps just like the ones you took off the Original. Just trying to avoid the problems I am going thu.

MGargano
06-02-2009, 09:20 AM
If you order those part numbers from Sparks you will get covers without holes for the lamps just like the ones you took off the Original. Just trying to avoid the problems I am going thu.

Then you received the wrong parts. The part #'s for the 09 covers without holes are RH- 81481-52110 & LH 81482-52100

CTScott
06-02-2009, 09:46 AM
The dealership that I ordered mine through took two tries. I gave them the correct part number, but the parts guy looked it up himself in the EPC and ordered the hole-less ones. The second time around they used the part number that I gave them and got the correct ones.

spookz
06-02-2009, 07:22 PM
The part numbers are correct. I ordered with those numbers and I received the correct parts..

Those part numbers show up as the following on their systems:
81481-52330 - COVER, FOG LAMP, RH - FRONT FOG & DRIVING LAMP-WITH
81482-52260 - COVER, FOG LAMP, LH - FRONT FOG & DRIVING LAMP-WITH

The 09 shrouds without fog holes are 81481-52320 (RH) and 81482-52250 (LH).

Geology
06-30-2009, 10:39 AM
How about installing the fog lights in the '09? pretty much the same as the lesser years?

CTScott
06-30-2009, 11:14 AM
How about installing the fog lights in the '09? pretty much the same as the lesser years?

Yes.

Treyz
06-30-2009, 12:32 PM
I gotta order mine today when I pick up the car. I took out the Toyota OEM lamps that I bought for my'07 because I didn't want to order them again.

I left the Ebay ones on the car instead. Funny thing is though that I had 2 sets and both had one crack. They cracked on the same side so I took the other one and installed it upside down. It's a little off, but did the trick.

Geology
06-30-2009, 02:06 PM
Yes.


No hidden tricks?


Is there any other place to get these covers that are cheaper than 18 bucks each?

CTScott
06-30-2009, 02:21 PM
No hidden tricks?

No. I installed an aftermarket 07-08 kit on my 09.

I purchased the 09 OEM fog light trim pieces from my local dealer and the OEM fuse panel relay from an Ebay vendor. By purchasing the relay I was able to wire it using the factory wires that go from the under hood fuse panel, through the under dash fuse panel, to the headlight stalk connector (this is the same for 07-09). I didn't like the quality of the switch that came with my kit and didn't want to spend the money for a headlight stalk with the fog switch, so I used a different toggle switch.

Treyz
06-30-2009, 03:31 PM
If you order those part numbers from Sparks ...
Why do you guys always swear by Sparks ... I get parts cheaper at PartzNet.com (Conicelli Toyota), lol. People alwyas forget about them.

But to answer the Q of cheaper than $18 .. no I havent found them cheaper.

CTScott
06-30-2009, 04:53 PM
One thing that I forgot to mention, is that my 09 came with the FOG fuse already installed. I purchased a variety pack of the microfuses, and then when I got under the dash to install the fuse, I realized that the FOG spot was already populated.

IsLNdbOi
06-30-2009, 05:25 PM
Didn't know we had to install a fuse to get the fogs working. In my '07 all I did was connect the fogs to the box in the engine bay, plug the relay in inside below and to the left of the steering wheel and then install the new stalk.

CTScott
06-30-2009, 07:53 PM
Didn't know we had to install a fuse to get the fogs working. In my '07 all I did was connect the fogs to the box in the engine bay, plug the relay in inside below and to the left of the steering wheel and then install the new stalk.

In that case, it sounds like that fuse is already there regardless of the year.

PatrickJohnson
07-07-2009, 01:31 PM
No. I installed an aftermarket 07-08 kit on my 09.

I purchased the 09 OEM fog light trim pieces from my local dealer and the OEM fuse panel relay from an Ebay vendor. By purchasing the relay I was able to wire it using the factory wires that go from the under hood fuse panel, through the under dash fuse panel, to the headlight stalk connector (this is the same for 07-09). I didn't like the quality of the switch that came with my kit and didn't want to spend the money for a headlight stalk with the fog switch, so I used a different toggle switch.

do you happen to have part numbers on the oem trim and a specific seller on ebay for the relay? I think this will be my next mod.

CTScott
07-07-2009, 02:17 PM
do you happen to have part numbers on the oem trim and a specific seller on ebay for the relay? I think this will be my next mod.

OEM trim pieces are Right: 81481-52330 and Left: 81482-52260.

I bought my relay from this ebay seller:

http://cgi.ebay.com/ebaymotors/Toyota-RELAY-90987-02027-Heater-Main-Power-Fuel-Tail_W0QQcmdZViewItemQQ_trksidZp4506Q2em20Q2el1116 QQhashZitem5188566ed8QQitemZ350179716824QQptZMotor sQ5fCarQ5fTruckQ5fPartsQ5fAccessoriesQQsalenotsupp orted

1NZYaris1
04-06-2010, 08:52 AM
Sorry to post here but does any one have photos of the Fog Light Combo
Stalk , Before and after it was instaled , Please :thumbsup:

Mouse
04-20-2010, 04:28 PM
If I wanted to order just the Driver-side shroud....Would it be the RH or LH?

Billiam
04-20-2010, 05:50 PM
If I wanted to order just the Driver-side shroud....Would it be the RH or LH?
Driver = left side

Mouse
04-20-2010, 06:27 PM
I know it = leftside but if you look at the diagram at TRD Sparks it shows the driver side listed with the RH.

Billiam
04-21-2010, 05:43 PM
I know it = leftside but if you look at the diagram at TRD Sparks it shows the driver side listed with the RH.
I'm getting ready to do a fog install myself...so I have the pieces you're talking about in my hand as we speak (well, type)....assuming you're talking about the surrounds for the '09+ LB.

Left side = #81482-52260
Right side = #81481-52330

Left side is certainly the driver's side and the right one is certaintly the passenger side. I verified this by holding it up to the car.

Sparks' info must be wrong.

1NZYaris1
04-21-2010, 07:31 PM
I have a set of 09-10 Hatch fogs and shrouds
100% plug and play and 100% complete $99.00US shipped
i also have 1 set for the 06-08 Hatch and 1 set for the Sedan
PM or email me for photo's .:thumbsup:

Mouse
04-21-2010, 11:59 PM
Thank you all for your help. I only want the drivers side shroud to allow air into the fender area for my intake....Yes, it is for an '09 LB