1NZ-FE Turbo need help

[we-to-11]

Hey guys, i got a 1.3 2SZ-FE Yaris 2005, i bought a whole 1NZ-FE engine to do a swap and put an turbo on it. Now im lookin for parts to get a longer life to the engine but i cant find that much... i will be happy if u got some links of parts, turbo kits or usefull ideas/tips for me... Thank u! Also u can mail on: minesskyline2004@yahoo.de

[whooppee777]

http://www.scionlife.com/forums/viewtopic.php?t=103597&start=25&sid=27c78bc7708d20c8ae4ea4a0a5d88202

http://www.raceprecision.com/forums/viewtopic.php?t=51

http://www.raceeng.com/p-9620-crwr-billet-rodtoyotascion-1nzfe-set.aspx

http://www.yarisworld.com/forums/showthread.php?t=10606

http://www.clubxb.com/forums/f28/1nz-fe-block-build-8826.html

http://cgi.ebay.com/ebaymotors/CP-Pistons-04-07-Scion-xA-xB-1NZFE-9.0:1-w%2F-Rings_W0QQitemZ130305246068QQcmdZViewItemQQimsxZ20 090509?IMSfp=TL0905091210005r21046

[we-to-11]

Thanks for that!

[we-to-11]

Where can i get a good header?

[CASTREX]

Header or turbo manifold?

[we-to-11]

Sorry, yes i mean turbo manifold... Kind Regards

[whooppee777]

2 different sites for the same manifold

http://www.whyindustries.com/store/p...products_id=55

http://www.365motorwerks.com/turbomanifolds.aspx

[CASTREX]

OK, first you have to focus your search not on yaris parts but on Scion xB (first generation) parts.

The 1st generation xB on the US has the 1NZ engine but with the same configuration as the 1NZ from your car. The exhaust line up is the same.. throttle body position...

And... there are a few options / kits / manifolds out there for that car... as there are many turbo'ed xB's in the US.

Do a search.

A good place to look around is on scionlife.com

[we-to-11]

Thanks, but these manifolds are they them i dont want :( do u know some with longer pipes? Like from YarisWrc on his cardomain site?

Kind Regards

[we-to-11]

I know that the scion got the same engine but my problem is that im a german and i know a lot of sites in germany but them all got only bodyparts for the yaris and only engine stuff for vw, bmw.... so i need to know some serious shops of outside of germany which have something for the yaris and maybee not locatet in japan because the shipping from there is to expensive :(

[Tamago]

do a 1.4L d4d diesel swap. you'll make more power and torque than a 1nz lol

[we-to-11]

? :confused::iono:

[CASTREX]

You won't find a long tube manifold for the Yaris. Any of those that you might have seem must have been custome made.

All the manifolds that I have seen for the 1nz are short due to the limited spaced behind the engine.

http://cgi.ebay.com/REV-HARD-Cast-Turbo-Manifold-04-Up-Scion-xb-DOHC-1-5LFI_W0QQitemZ320374092323QQcmdZViewItemQQptZMotor s_Car_Truck_Parts_Accessories?hash=item4a97c8b223&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

http://cgi.ebay.com/03-06-SCION-XB-XA-1-5L-CAST-T25-TURBO-EXHAUST-MANIFOLD_W0QQitemZ250431189286QQcmdZViewItemQQptZM otors_Car_Truck_Parts_Accessories?hash=item3a4edcb 126&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318%7C301%3A0%7C293%3A1%7C294%3A50

[Sabretooth]

Not exactly...

In my research I have found two types of Turbo manifolds for the Yaris, either the traditional "log" style, or the tube style...

Only 1 place that I know of makes a tube style, and it should work better for the older gen Vitz over our newer ones. Although the car that had it used had to remove the power steering.
http://www.turbinetech.ca/produit_detail.php?id=32&SESSID=55ec154e6d83a38c8a24a87856ac096c&lang=AN

Oh and I opt this be moved to the Forced Induction section

[Tamago]

don't forget RevHard cast manifolds

[cali yaris]

Although the car that had it used had to remove the power steering.
http://www.turbinetech.ca/produit_de...ac096c&lang=AN

Yeah, but we have electronic p/s so that is not an issue for us.

[we-to-11]

So what u think about to buy a whole turbo kit and maybee replace the manifold or buy everything in pices? And what u think about the two kits from ebay if u search for 1-nzfe turbo? I cant do a link in here because i moved and im online by phone...

[cali yaris]

There are quite few threads that already cover this.

Basically PLEASE BUY A KIT so the rest of us can see if it works.

[shirazkhan]

Hey guys, i got a 1.3 2SZ-FE Yaris 2005, i bought a whole 1NZ-FE engine to do a swap and put an turbo on it. Now im lookin for parts to get a longer life to the engine but i cant find that much... i will be happy if u got some links of parts, turbo kits or usefull ideas/tips for me... Thank u! Also u can mail on: minesskyline2004@yahoo.de

can 1 swap my 1SZ-FE setup to 1NZ-FE setup without any alters or mods ??
i currently have a M/T & i m planning the 1NZ-FE also with a M/T
its a 1st gen JDM VITZ 1.0 M/T

any help please ?

[EdgarTRD1.8]

Thanks, but these manifolds are they them i dont want :( do u know some with longer pipes? Like from YarisWrc on his cardomain site?

Kind Regards

I were watching the space in my Echo and has space to put a turbo manifold like you want on it, but I don't know if the Yaris has the same space. I'll take time to build one, to see if can be placed into a Yaris.