PDA

View Full Version : AEM Cold Air Intake!!!

BulletProofAuto
09-15-2006, 07:12 PM
Well guys they are finally here!!!:thumbup:

Order yours today and open up that engine's restrictive factory airbox with the best intake on the market...not to mention the added deep sound.

Here is the link to order, have fun:burnrubber:
http://www.bulletproofautomotive.com/catalog-detail.php?ID=5594
BulletProofAuto
09-15-2006, 07:41 PM
it's only available in polished by the way
Chris07LB
09-15-2006, 08:20 PM
:thumbup: for a good price! Nice John. :smile:
BulletProofAuto
09-15-2006, 08:58 PM
i didn't make it too low did I?
;)
Katana
09-16-2006, 01:45 PM
It does not fit the 1.3lt engine does it?

Are you planning on bringing something for mine?
BulletProofAuto
09-16-2006, 02:08 PM
It does not fit the 1.3lt engine does it?

Are you planning on bringing something for mine?

that would be dependant upon a few factors:
-engine layout would have to be the same for pipe routing.
-no extra emissions equipment
-throttle body size of similar diameter.

i don't have the anwer to all 3 of these questions right now.
ChinoCharles
09-16-2006, 04:24 PM
How about some dyno results!
Katana
09-16-2006, 05:28 PM
that would be dependant upon a few factors:
-engine layout would have to be the same for pipe routing.

Νο, it's opposite.
BulletProofAuto
09-18-2006, 02:02 AM
well there you are...are there no intakes available in europe for this engine?
Violin
09-18-2006, 07:51 AM
Now you're talking!

How much of an increase in HP is realistic with this?
Will it decrease my mileage?
Katana
09-18-2006, 09:08 AM
well there you are...are there no intakes available in europe for this engine?


:mad:Νοpe, I haven't found anything...:mad:
BulletProofAuto
09-18-2006, 02:09 PM
you're mileage will increase since you are increasing the efficiency of your motor...but chances are you'll actually decrease your gas mileage since you'll be gunning it all the time. as of hp increase...no dyno results yet. i would expect around 4-5 peak hp though, unless this is a crazy motor like honda's k20 which makes ~18 peak hp with just an intake...but i doubt that would be the case.
Violin
09-18-2006, 06:25 PM
Thanks John - This one goes on my short list. I'll be in touch.
RossP
09-18-2006, 09:41 PM
:mad:Νοpe, I haven't found anything...:mad:

I think you'll find the GReddy Airinx II should fit...
Katana
09-19-2006, 05:21 AM
I'll look into it.
Katana
09-19-2006, 05:28 AM
@RossP as I have seen, it fits the 1.0lt engine.

Is it sure that it will fit the 1.3lt engine?Does your company sell it?
RossP
09-19-2006, 08:14 AM
Yes, it will fit the 2sz-fe becasue it is based on the 1sz-fe. My one will be for sale soon, when i fit my turbo because i will be using an apexi cone instead.only possible problem is the clearance between the engine and the bonnet, if it's too small, it may not fit
Katana
09-19-2006, 12:04 PM
Have you seen any difference with that on?

I mean I have already purchased a high flow air filter and I have not seen any difference.

As far as space is concerned, I think that there is a problem because the front grill does not allow much air to come in the engine.
RossP
09-19-2006, 10:33 PM
Notice a difference? TBH, what difference do you expect to see on a 1.0l? It makes a nice sound, and looks good tbh. Oh and it filters the stuff better than standard too. I guess there must be a difference as its connected directly and not through an air box