4 X 108 questions

[Cosmonaut]

so the hole for the lug bolt is 5/8 inch dia.
the wheel is 17X7 +49 offset 4X108
basically i have a set of EAP focus wheels that im having a hard time selling.
and mounting these would be kick ass if it could workout.

any input?

http://i153.photobucket.com/albums/s209/red_five_o/focus/closeup-1.jpg

[largeorangefont]

Advertise them on a Ford Focus forum, or post a Craigslist curb alert.

[Cosmonaut]

i have posted on focusfanatics but already 3 people backed out.
so i guess they wont fit?

[Kaotic Lazagna]

Ah, if only the Yaris was 4x108 instead of 4x100. Those are some nice rims.

[yarisugi]

You probably could add some adapters if you want it to fit the Yaris.

[Kaotic Lazagna]

True that, but I've never seen 4x100 to 4x108 adapters before.

[Tamago]

True that, but I've never seen 4x100 to 4x108 adapters before.

the money spent getting adaptors (which add a VERY considerable amount of "negative offset" .... RUB CITY) would be better spent in another area.

even if you could get the wheel to go ON the hub, your conical lugs would not seat properly and you'd most likely crack the wheel, or deform the lug seat. then you'd have wheels that no one would want, especially the people who the wheel was designed for (focus, mustang)

[kimona]

You could take them to a shop and have them drilled 4x100. I had wheels drilled numerous times when I lived in Southern California. You end up with a dual drilled wheel; in your case, 4x100/4x108.

[Tamago]

You could take them to a shop and have them drilled 4x100. I had wheels drilled numerous times when I lived in Southern California. You end up with a dual drilled wheel; in your case, 4x100/4x108.

and the cost? would it be worth it?

[kimona]

and the cost? would it be worth it?

If you REALLY like the wheels.

[Tamago]

If you REALLY like the wheels.

ahhh understood.. like a set of panasport's that have been in the family for centuries :biggrin: