would 16x8 with +25 offset fit on the rear?

[marcus]

would 16x8 with +25 offset fit on the rear without rubbing when car is full?

[Tamago]

what tire?

i'm wagering NO, not without some camber added or some fenders pulled.

[AlainMikli]

NO!!

I have 16x7 +42 offset all around, 15mm spacer on rear, stock camber on rear, front should be like 0.5 more than stock.

I already rub the front in full turn:evil:

I rub the rear in some small bump, even with no passenger!!

I've try e passenger with me at the same time, super rub even on local...


I think you have to run a large camber..if you want to run 16x8....

but still need to see how low you are:wink:

[marcus]

thanks...so 16x7 +40 on the rear its safe to put 10mm spacers to get zero rub even when full but i may be runnign 195 on the tires. assuming u got 205s

[Tamago]

thanks...so 16x7 +40 on the rear its safe to put 10mm spacers to get zero rub even when full but i may be runnign 195 on the tires. assuming u got 205s

yes, an effective +30 and a 195 tire you'll be fine with a X7 width

[AlainMikli]

I'll rub the front a little bit, when I push it hard in some corner, but you should be fine if you run some 195 tires:tongue:

[marcus]

im thinking of staggered set up front 16x7 +40 offset and then rear 16x8 +25 offset car is in trd spring but may switch to df210 later on. plus camping month the car get full so i dont want rubbing on the fenders..

[kngrsll]

i have 15x7 +25, no rub. i could actuall use a spacer in the rear (i have some camber too)

[WeeYari]

im thinking of staggered set up front 16x7 +40 offset and then rear 16x8 +25 offset car is in trd spring but may switch to df210 later on. plus camping month the car get full so i dont want rubbing on the fenders..

Switch to DFs and you won't have a hope in hell of avoiding a rub. Most likely going to happen on the current TRDs.

BTW - this is your 3rd 'rub' thread isn't it?

[AlainMikli]

here is some pic of mine, 16x7 +42, 15mm spacer in the rear

if you run 16x8 +25...you should be (0.5"+2mm) more flush than mine at the rear.....

i think you should be rub when your car get full.....:frown: (with the stock camber)

[AlainMikli]

Switch to DFs and you won't have a hope in hell of avoiding a rub. Most likely going to happen on the current TRDs.

BTW - this is your 3rd 'rub' thread isn't it?

:bellyroll::laughabove:he just don't want to get rub

[marcus]

Switch to DFs and you won't have a hope in hell of avoiding a rub. Most likely going to happen on the current TRDs.

BTW - this is your 3rd 'rub' thread isn't it?

maybe the 3rd ..sound about right but really i havent got the rims..i was ready to get them but local dealer cancelled with drag wheels due to shipping issues so im back to the drawing board..now a dealer offered me staggered rims so im trying to figure this out..its good for others as well.. all i know so far.. 16x7's zero rub on +40 offset assuming u used 195's/50/16..for the front.

but the way the rubbing issue is on the side of the fender..so trd or df210 should not make a difference if u got the right offset and tire size.. 2 person on the back on the trds tucks the tire on the fender..just like that.

[AlainMikli]

i'm not lowered by spring, so may be yours are little bit higher than mine, but softer....

[marcus]

i find trd / eibach pro kit i believe really soft..which maybe a good thing most of the time.

[Thirty-Nine]

Sorry to nitpick, but shouldn't this be in the wheel/tire area?

[etheliters]

I'm interested as I'm putting 16x8 on rear of my lb. Pretty sure I'm gonna roll the fenders. How much should it cost?