Motegi Racing MR7 wheel Spec?

[areithan1980]

I would love to get some info can't find the specs for this wheel i have, got it used from a friend of mine. It would be much appreciated!

[cali yaris]

The spec will *probably* be printed on the inside of the wheel.

17 x ___

___ mm offset

weight= ______

Those are the specs that matter. :smile:

[areithan1980]

hmmm... i cleaned all four wheels and didn't see anything i'm gonna try again online just in case.

[kimona]

Motegi MR7

14 x 6.0, ET35
15 x 6.5, ET35
16 x 7.0, ET42
17 x 7.0, ET40
18 x 7.5, ET45

[areithan1980]

tnx

[cali yaris]

kimona ftw

[areithan1980]

fo sho man!

[Sabretooth]

Weight!!!! I had a set of Motegi MR7's they were 17s...they weighed 22lbs a pop!!! Before tires! Good wheels to work out with, horrible for track use and mpgs!

[thebarber]

mr7s = anchors

[Lazerdot]

Ya my Konig Daylights are definitely for show, not for go. Most of the "cool" lookin wheels are heavy. I had a Motegi wheel set on my R32 a few years ago. They were light. LC-5s sounds about right though. Whatever they were, the car felt peppier.

Garm had recommended some wheels to me a while back. SSR?

Good luck with whatever you use.:burnrubber:

[cali yaris]

SSR is a great wheel, and I use nothing else, but expensive.

Now we know (thanks to Tamago) that Miata spec wheels fit, so there are quite few choices in cool, lightweight wheels.

[Sabretooth]

Thats a good site for if you just wanna do a one stop shop on a nice wheel setup for track use...Good find Echo!

[Lazerdot]

Hey guys, I did some checking and found the daylites at 17 inches at 14lbs. That sounds light, is that correct? If so not as bad as I thought...

[puetato89]

awesome find echo!!