JBT/Wilwood brake kits?

[Gideon]

Does anyone know where we can pick up either kit?

I know JBT makes a 4 pot kit with 303mm rotors and Wilwood apparently makes a 4 pot as well with 310mm rotors.

Seems like either one would be a cheaper option than Endless, which is over $4K for their 4 pot kit.

[CDavis7M]

For about $2,900 US you could get the Project Mu 4 piston slim calipers with 300mm rotors.

Part number FS4S-T302 or, FS4C-T302 for 282mm rotors

[AlainMikli]

GReddy's 6 piston BBK just $1329.99, this is for xA/xB, I don't know if it will fits yaris, if it doesn't fit yaris, all you need is to make a custom bridge...it doesn't cost you too much...

http://www.fastscions.com/images/products/detail/greddy_big_brake_kit.jpg

GREX Big Brake Kit FRONT
Fits 2003-2007 Scion xA / xB
Part Number: 15015652

Backed by extensive research and development, GReddy Brake Systems are designed as full competition-spec. brake kits suitable for street use. Each application-specific GReddy Brake System kit will work with a wide variety of wheels. Lightweight 4 and 6 piston aluminum calipers are designed to be as compact as possible and are stylishly protected by our classic GREX gold hard anodized finish. Large lightweight, motorsport style, two-piece rotors use an anodized, duralumin bell housing to prevent rusting and scratching. The finest quality Earls Teflon lined stainless steel braided brake hoses are also included for maximum performance and reliability.

Included:
- 6-Piston Front Calipers RED
- 2-Piece Front Rotors
- SS Front Brake Lines
- Front Brake Pads

[vten]

Garm from the microimageonline.com is working on the 4 pot wilwood BBK. I don't know when he'll be done with it but it'll be worth the wait :thumbup:

[cali yaris]

I have the calipers, pads, lines and rotors, just working on a custom bracket to hold it on there and we will have a very nice brake kit for a GREAT price.

[AlainMikli]

I have the calipers, pads, lines and rotors, just working on a custom bracket to hold it on there and we will have a very nice brake kit for a GREAT price.

is that a mini BBK? will it fit my 16" rims:frown:?

[cali yaris]

I'm making two versions, the only difference is rotor size and the custom bracket. One will fit stock wheels (15"+) with stock rotor size, the other will fit with a 320mm rotor.

[cali yaris]

Wilwood apparently makes a 4 pot as well with 310mm rotors.

Gideon, can we have a link or part number for this kit?

[Gideon]

This is all I have for Wilwood:

http://homepage2.nifty.com/carcareoffice/wilwood/wilwood03.htm

Listed under NCP91.

[blacksandiegovitz]

I'm making two versions, the only difference is rotor size and the custom bracket. One will fit stock wheels (15"+) with stock rotor size, the other will fit with a 320mm rotor.

Nice , I'll take the bigger version when it doen :thumbup:

[AlainMikli]

I'm making two versions, the only difference is rotor size and the custom bracket. One will fit stock wheels (15"+) with stock rotor size, the other will fit with a 320mm rotor.

is there any option I can only get the bracket & calipers(mini) instead of getting the whole set of "calipers, pads, lines and rotors":tongue::tongue:

[vten]

calipers, pads, ss lines and custom brakets for the 320mm for me please ...:drool:

[cali yaris]

gideon, that is a wild link man!
read the words at the top, too funny. Is it a Japanese site?

Worth looking into, if anyone can figure that out!

[cali yaris]

here's the caliper I want to use:

http://www.microimageonline.com/images/products/MI/wilwood-caliper.jpg

[Gideon]

gideon, that is a wild link man!
read the words at the top, too funny. Is it a Japanese site?

Worth looking into, if anyone can figure that out!

Yeah, it's a Japanese car part site. Looks to be regularly updated from the home page too.

[AdeJong 03]

any updates on your bbk garm?

[mrbond]

Hey, what ever happened with this?

[Brian]

Garm sells the Kido brakes now

[xbgod]

Be careful what you buy. All the kits your looking at are fixed position calipers which means any run-out in your rotors and your steering wheel will feel like it's coming out of your hands. 70% of all braking is done by the front unless you change your M/C to a more race oriented M/C which is about a 60/40 split.

I've delt with Willwood for 10 years good quality parts but most of their caliper now are cast and not billet. Not a big deal for what were doing.

You can call Willwood direct ask for Caral tell him Aras sent you from Aerospace. He'll take care of you. It helps when you been in the brake business for a decade.

XBG

[cali yaris]

The KIDO kits are very nice, well-made brake kits for the Yaris. We have them on a few cars now with no issues.

I am also a Wilwood dealer, but I have not seen a Yaris kit from them.