Log in

View Full Version : Tinted windows


ChinoCharles
10-03-2006, 02:14 AM
Got my windows tinted finally. 5" 20% strip on the windshield, 50% front passenger windows, 35% rear windows, 20% hatch window. Cost me $170 with a one year warranty, and best of all it is still legal! Pics tomorrow when I wake up... hangover included. :drinking:

vodkalush
10-03-2006, 07:10 AM
lol

Violin
10-03-2006, 12:13 PM
We're not supposed to have tint on the front windows here in NJ. Tons of people have dark tint and never have a problem. I figured I'd play it safe and only get 50% on the fronts.

I just got a $54 ticket on my way to work this morning. Friggin' small town cops!

FoEKuZ
10-03-2006, 12:20 PM
We're not supposed to have tint on the front windows here in NJ. Tons of people have dark tint and never have a problem. I figured I'd play it safe and only get 50% on the fronts.

I just got a $54 ticket on my way to work this morning. Friggin' small town cops!

was that the main reason you got pulled over? for the tint only?

did you speed, run a redlight, not stop at a stop sign fully???

over here in cali....well, from what ive seen, they'll only slap you with a tint ticket if you were doing something else to get pulled over for....

Violin
10-03-2006, 12:44 PM
Nothing else. I just got a dick cop with nothing better to do. He also gave me a verbal warning for the clear lexan cover on my license plate.

FoEKuZ
10-03-2006, 12:46 PM
Nothing else. I just got a dick cop with nothing better to do. He also gave me a verbal warning for the clear lexan cover on my license plate.

that blows donkey balls:frown: ....especially for the plate deal....

ChinoCharles
10-03-2006, 01:06 PM
As promised...

BEFORE
1695

AFTER
1696
1697

I'm stoked about it. This is the first step in changing a lot of things on the outside of the car to black... rims, smoked headlights, smoked tail lights, painted rear badge...

The next project I'm undertaking is figuring out how to install that power window kit as soon as my tint dries. My buddy is officially too busy to help me out, so fuck it. I have never installed anything electronic in a car so it will be a first for me, but I am confident that I can do it if you guys guide me a little bit along the way. All you people proficient in electronics, I'm gonna need your help! I'll probably scan the instructions today and post it in this forum. I'll have to know what tools I will need to buy.

vodkalush
10-03-2006, 01:12 PM
look'n good.

what arent you sure of with the power windows? Isnt just a matter of installing a few buttons, installing new window tracking, and the motor/wires?

ChinoCharles
10-03-2006, 01:25 PM
There is no tracking with this kit. It is simply a motor and a device that latches onto the stock window roller, so it keeps the existing tracking.

Having said that, I am not sure of anything, haha. The kit has a lot of pieces and looks very daunting out of the box, but I'm guessing it can't be as hard as it looks. Luckily most of the wiring is painless. The hardest part should be mounting the motors and putting together the new window assembly.

vodkalush
10-03-2006, 01:51 PM
did it come with directions?

but mounting the motor shouldnt be all that bad, its gotta have a bracket or screw hole; simply pre-drill and make sure that you seal your holes with primer/sealer so moisture doesnt cause your doors to rust from the inside out.

if you had pics i might be able to help (or atleast try) some.

ChinoCharles
10-03-2006, 01:56 PM
It did come with directions, although they are very ratty and hard to read. I'll scan them and have them up soon, just need to find someone with a scanner.

vodkalush
10-03-2006, 01:58 PM
use the "rich mans" ghetto scanner..... lay them out flat and take a pic

ECHOKnight2000
10-03-2006, 03:05 PM
Looking good!:thumbsup:

jeff_o
10-03-2006, 11:58 PM
Nothing else. I just got a dick cop with nothing better to do. He also gave me a verbal warning for the clear lexan cover on my license plate.

lexan cover on license plates? are these the clear plastic case that you bolt up to the license plates to protect them from dirt? are they illegal as well? but why?

TrancosRt
10-04-2006, 12:13 AM
lexan cover on license plates? are these the clear plastic case that you bolt up to the license plates to protect them from dirt? are they illegal as well? but why?

Well.. For what I gatter, they are NOT meant to protect the plate but rather to mm... "get away" with traffic cammera tickets :wink: Basically at night the cammera will shot the flash and suppodselly the flash bounces back, rendering the plate unreadable. At least, that's the use I know for them. So yea, they're illegal.

EnduroMTS
10-04-2006, 03:28 AM
As promised...

BEFORE
1695

AFTER
1696
1697

I'm stoked about it. This is the first step in changing a lot of things on the outside of the car to black... rims, smoked headlights, smoked tail lights, painted rear badge...

The next project I'm undertaking is figuring out how to install that power window kit as soon as my tint dries. My buddy is officially too busy to help me out, so fuck it. I have never installed anything electronic in a car so it will be a first for me, but I am confident that I can do it if you guys guide me a little bit along the way. All you people proficient in electronics, I'm gonna need your help! I'll probably scan the instructions today and post it in this forum. I'll have to know what tools I will need to buy.

You got some werid hubcaps.. I've never seen thoose.

Violin
10-04-2006, 08:01 AM
lexan cover on license plates? are these the clear plastic case that you bolt up to the license plates to protect them from dirt? are they illegal as well? but why?

I didn't know about the glare biz. I bought them to keep the plate looking new as I plan to drive this car into the ground. It's a lexan cover with a chrome ring:

http://img.photobucket.com/albums/1103/rjenkie/81b234cb.jpg

ChinoCharles
10-04-2006, 02:57 PM
You got some werid hubcaps.. I've never seen thoose.

I got the car bone stock, which meant 14" rims. Those are the hubcaps that came with the wheels.

SDsurfrider
10-05-2006, 04:31 AM
those do look kinda weird (hubcaps). Just got my tint today, 50% front, 6%rear and 4" windshield strip. And I have the steelies with caps too!
no before, only afters:
http://members.cox.net/sdsurfrider/pictures/IMG%20-%20001.jpg
http://members.cox.net/sdsurfrider/pictures/IMG%20-%20002.jpg
http://members.cox.net/sdsurfrider/pictures/IMG%20-%20003.jpg
http://members.cox.net/sdsurfrider/pictures/IMG%20-%20006.jpg

vodkalush
10-05-2006, 07:34 AM
look'n good*

ChinoCharles
10-05-2006, 02:44 PM
Nice... huge difference between front and rear windows though. Exactly what I was trying to avoid.