exhaust tips what do you think?

[06silveryaris]

Hi, I saw pics on the custom exhaust sticky one yaris had middle dual exhaust tips also a dark gray yaris who I forget the name but it looks very cool IMO. Here are the pics for the tips I bought I have not yet installed them since I have to make a new pipe coming from the exit of the oem muffler. The pics where just taken they are a bit dark but youll get the picture. Looking foward for feedback. thanks

[Qmobile]

nice one dude!!

[kac]

looks kool to me!

[Kaotic Lazagna]

Were you referring to me? :biggrin:

http://i208.photobucket.com/albums/bb261/YarisKaos/05-21-09/FairOaksHDR2PM-2.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/03-29-09/MareIslandHDR2PM-2.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/03-25-09/DSC_0076.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0055.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0054.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0056.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0053.jpg

[Kaotic Lazagna]

Just make sure you won't need to jack up the car from the rear jack point as I had to have it cut off (at least for the sedan, it's smack dab in the middle).

[cleong]

Doesn't it melt your bumper a bit, the hot exhaust tip?

[06silveryaris]

Were you referring to me? :biggrin:

http://i208.photobucket.com/albums/bb261/YarisKaos/05-21-09/FairOaksHDR2PM-2.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/03-29-09/MareIslandHDR2PM-2.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/03-25-09/DSC_0076.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0055.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0054.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0056.jpg

http://i208.photobucket.com/albums/bb261/YarisKaos/Foglights%20And%20Exhaust/DSC_0053.jpg

Yeah i meant you but I was so tired couldn't look you up sorry man, but yeah I will be making the piping tomorrow since I will use the oem muffler. Do your tips burn the bumper because that I have somo concern with.

Thanks everyone for your feedback

[Sabretooth]

So far, this is the best exhaust tip that you could throw on your Yaris...just get them to cut it shorter past the bolt on shit...then weld er up!

http://cgi.ebay.com/ebaymotors/Toyota-Exhaust-Tip-Dual-Muffler-Stainless-Yaris-New-OEM_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7 c39Q3a1Q7c72Q3a2125Q7c293Q3a1Q7c294Q3a50QQ_trksidZ p3286Q2ec0Q2em14QQhashZitem3ca3eb0542QQitemZ260448 126274QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessor ies

http://i416.photobucket.com/albums/pp248/nnssuu/withbox1.jpg

[Kaotic Lazagna]

No, it does not melt/warp/affect my rear lip. I've had this on for the longest time. I was worried about it at first, but I waited to see if anything will happen before I took further action. So far, so good :biggrin:

[06silveryaris]

No, it does not melt/warp/affect my rear lip. I've had this on for the longest time. I was worried about it at first, but I waited to see if anything will happen before I took further action. So far, so good :biggrin:


thats good to know since it will be very close:thumbup:

[Kaotic Lazagna]

Can't be closer than mine. hehehe. I have 1 mm of space between the tips and the lip. hahaha. Just make sure you have the tip sticking out a bit. I think that may be helping me not ruin my rear lip.

[06silveryaris]

yeah I will have them stick out a bit but I will post pics tomorrow one I get it done. I still have to make the pipe and weld it

[Kaotic Lazagna]

Does the LB have the rear jack mount in the middle too?

[06silveryaris]

I beleive so it have a fixture down there I wil see if I need to cut it

[MPC Motorsports]

So far, this is the best exhaust tip that you could throw on your Yaris...just get them to cut it shorter past the bolt on shit...then weld er up!

http://cgi.ebay.com/ebaymotors/Toyota-Exhaust-Tip-Dual-Muffler-Stainless-Yaris-New-OEM_W0QQcmdZViewItemQQ_trkparmsZ65Q3a12Q7c66Q3a2Q7 c39Q3a1Q7c72Q3a2125Q7c293Q3a1Q7c294Q3a50QQ_trksidZ p3286Q2ec0Q2em14QQhashZitem3ca3eb0542QQitemZ260448 126274QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessor ies

http://i416.photobucket.com/albums/pp248/nnssuu/withbox1.jpg

I've seen that one and have thought about getting one for my TRD exhaust. I love dual outlet tips.

Marc

[06silveryaris]

OK installed this morning. btw I did not have to remove the jack lift area but I did have to modify it a bit but it still works.What do you think? Also the exhaust note change a bit it actually got a bit deeper and burblier I will try to post a vid. I tink the sound is just an echo of the exhaust not since the tips are large. I like the sound.

[06silveryaris]

This is from underneath

[CTScott]

That looks great! I have the tip that MPC posted the pic of above, but I'd really like to move the output to the center. What tip did you weld on?

[Kaotic Lazagna]

Nice. I guess LB's are lucky in that they do not have to lose their jack point. hehe. That is a very nice tip. How much did you get it for, and is it stainless steel?

[06silveryaris]

That looks great! I have the tip that MPC posted the pic of above, but I'd really like to move the output to the center. What tip did you weld on?

its a 3A racing tip I picked it up at a local auto parts store for $25

[06silveryaris]

Nice. I guess LB's are lucky in that they do not have to lose their jack point. hehe. That is a very nice tip. How much did you get it for, and is it stainless steel?

Not sure if its stainless, as far as the jack point I did melt of some of it to be able to center the tip. It was cheap $25 at a local auto parts store, it was one of those items that never sold super dusty. I am sure you can find one or similar style at a Pepboys or something like that.

[Kaotic Lazagna]

hmmm, if it's SS, then I'll go for it in the future. My tip is just chrome plated, so it's rusting inside :frown:

[06silveryaris]

Thanks on the comments :smile:

[CTScott]

Looks like it might be the 3A Racing 62-2507. If so, it is stainless steel.

Did you weld the tip on, or just use its clamp-on mount?

[06silveryaris]

Yes it is welded I will try to find the wrapper for the part #

[Kaotic Lazagna]

Thanks.

[06silveryaris]

Looks like it might be the 3A Racing 62-2507. If so, it is stainless steel.

Did you weld the tip on, or just use its clamp-on mount?


you are correct it is 622507:clap:

[Kaotic Lazagna]

Cool. Thanks.

[1NZYaris1]

Did mine about 12 months ago :biggrin:

[06silveryaris]

Did mine about 12 months ago :biggrin:

Yeah I saw your pics also on the custom exhaust thread. Niice

[botchilah]

Damn I know what I'm doing but with a nice oval single tip this weekend :)

[06silveryaris]

Cool is going to be in the center othe oe
m position?postt pics

[advocate]

looks great congratulations