Dyno day today 8/23

[cali yaris]

I'm off to see what my car can do on the dyno. Will be tweeting and I'm bringing a camcorder. Zoom? .... or Boom?

[eTiMaGo]

zoom zoom ZOOOOOOM

BOOM will be the other cars you ZOOM past :laugh:

[Tamago]

what time today?

[blacksandiegovitz]

Hell yes! Post up the numbers later Man

[eTiMaGo]

http://twitter.com/microimage keep an eye on it :wink:

[AlexNet0]

http://twitter.com/microimage/status/3493017020

yeah, he was leaving shortly 2 hours ago, lol, so It cant be too terribly long.

[RUFFSTUFF]

Good luck!

[PETERPOOP]

my favorite day of the year!

[808_Yaris]

Can't wait to see the results!

[eTiMaGo]

just got an email with this:

http://dl.getdropbox.com/u/691356/MI/dyno1.jpg

It's ON, people!!!

[AlexNet0]

DAMN, I was just gonna post THIS (http://twitter.com/microimage/status/3495437517)

[AlexNet0]

lol, I was hoping the video would be on Chassis dyno, but this works :wink:

[Sabretooth]

Oh well, was hoping to see it skip along on a traditional dyno...this works though, hehe

Shall we start taking bets on how much HP/TRQ?

I call
316hp/256tq

[Sabretooth]

No edits allowed on your guesses or it wont count!

[eTiMaGo]

Garm: 8 psi, 170whp, 164 torque
First pull


just getting warmed up :wink:

[Sabretooth]

oh common, kick it up another 10psi

[AlexNet0]

oh common, kick it up another 10psi


I dont believe they are just doing pulls at different boost.
I believe they are tuning the maps as they go along, much safer that way.

Please correct me if im wrong.

[eTiMaGo]

Garm: 227/207 at 11psi

Woooooo!

[Sabretooth]

Oh the whole point was to tune the car, so this could take a while before we see some really good numbers.

[AlexNet0]

Woooooo!

holy shit. still pump gas?

[Sabretooth]

Yep, still pump gas...sorry im getting updates from Garm as well

[Kaotic Lazagna]

NICE!

[Sabretooth]

He's sticking with 12psi on pump gas, 225whp.

Hes putting in 109 octane fuel now!

[Sabretooth]

Reporting that the transmission and clutch are holding up fine so far

[Sabretooth]

Delivery of Carl Jrs has arrived, Dynoing will be restarting soon....LMAO

[AlexNet0]

carl jrs? lol

[Sabretooth]

Carl Jr's = Hardee's = Tasty burgers

[Sabretooth]

310whp
273 wtq @20psi!

[minired5stby]

Go go go baby go aaaaa sssss push it!!!!!!!!!!!!!!!!!!

[AdeJong 03]

310whp
273 wtq @20psi!

exceeded his goal. good stuff

[PETERPOOP]

dude, this is on a dynapack too!!!!!! the numbers on that thing is relatively low compared to a dynojet. i can't imagine the numbers he'd put down on a dynojet!!!!!! HOLY FART!!!!!!

[AlexNet0]

310whp
273 wtq @20psi!

holy shit.

I hope he keeps going lol

too bad he couldnt stream us his video live lol

[1NZYaris1]

310whp
273 wtq @20psi!

Dam did they put Octane boost in those burger's:bow:

[AlexNet0]

Dam did they put Octane boost in those burger's:bow:

lol, they switched to 109 octane, I believe.

[thebarber]

*waits for dyno sheets*

[PETERPOOP]

i want to see your car in every tuner magazine by next year!

[Sabretooth]

Lol, its an eco-evo killer

[AlexNet0]

any updates?

[cali yaris]

got her up to 310, then backed off for a better curve.

303 whp / 284 torque @ 20 psi

http://www.microimageonline.com/images/garm/DYNO-82309-20psi.gif

[thebarber]

nice....is that a daily tune then?

[cali yaris]

13 psi is a daily tune, about 220 whp I think, on pump gas (91). The tune above was on 109 octane.

Until I add water/meth, then I can do a lot better.

[minired5stby]

Dammmmmmmmmmmmn break it down ur gonna kill it at time attack.

[AlexNet0]

Woo, what can you do now to jack up the Torque? Im assuming you could have gotten more HP.

Holy crap look how fast that climbed. lol


Did you get your video?

[thebarber]

303whp, 2100lb car....traction? we don't need no stinkin traction

[CASTREX]

I knew you were going to hit 300.

Congrats and Big respect...!

[Yoda]

simply epic:bow: i can't believe how fast that thing climbed:thumbsup: Must have you pushed back in your seat with your eyes to your brain:eyebulge:

[PETERPOOP]

you know that thing is atleast 250whp on a dynojet, right?


any plans for a dynojet pull?

[AlexNet0]

250? he broke 300

[PETERPOOP]

I'm referring to the 13psi 225whp he got on the dynapack for his daily driving. I'm saying, if he did it on a dynojet, he'd have atleast 250whp.

[AlexNet0]

ahh, gotcha, lol

[LtNoogie]

That is awesome, Garm.

[cali yaris]

^ thanks -- a water/meth kit is in my near future, maybe we can work together?

[AdeJong 03]

225whp on a car that weighs 2100 lbs is more than enough power to take the big boys on any time attack assuming your suspension tune is on point.

good stuff garm!

am i gonna get to see it at the shop tomorrow? any plans to try to make your own bolt on kit for yaris owners?

[cali yaris]

I am more interested now in producing a kit, can't say for sure yet, but we ARE looking into it.

[thebarber]

I am more interested now in producing a kit, can't say for sure yet, but we ARE looking into it.

producing a turbo kit?

*starts saving*

[cali yaris]

there's another easy 50 hp in my set up, more tuning to do in the near future.

[cali yaris]

http://www.youtube.com/watch?v=SeGevOKBNxQ

[Kioshi]

WOW....i guess you make the impossible, POSSIBLE Garm.

Congratz. I can't wait for mass production, forget all future bolt ons and accessories, this kit will be the only thing we need. :)

[PETERPOOP]

micro image turbo kit! niceeeeeeeee

[ruimond]

That's awesome work Garm. That's alot of power for the little yaris. Congrats. :thumbsup:

[808_Yaris]

wow :drool: micro image FTW! how do you like driving the beast?

[Tamago]

what headwork did you do? enough to warrant a 7500rpm redline? that'd REALLY help you get a little more HP and keep all that torque ;)

[The Spectacle]

Good shit man congrats

How does it feel on the street? What engine management did you end up using? Sorry, been out of the loop working on my car.

[SweetRS]

got her up to 310, then backed off for a better curve.

303 whp / 284 torque @ 20 psi

http://www.microimageonline.com/images/garm/DYNO-82309-20psi.gif

wow, my guess on the microimage forum was really close (302whp/286ft-lbs) lol!!!!!

[thebarber]

I finally get my current setup under control and now you're
teasing me with a new kit that basically turns it to dust...just awesome...

Cheers

i might know someone to take that s/c off your hands ;)

[PARIS]

Congratulations for the moster! :smile:
it must be very fast!

[cali yaris]

Thanks guys! Tamago, just stiffer springs and port/polish. With some cams we could rev higher, and that is now a consideration for the next round of work.

for now though -- it's time to go to the track. :thumbsup:

[Mouse]

Is this with the intake manifold you are developing?

[cali yaris]

^ no, stock plastic xB manifold and throttle body (= small TB!)

[supmet]

http://www.gifshare.com/uploads/images/20071023/full_size/7739_notworthy.gif

Awesome Garm...

[contraband831]

Now that is a Monster, simply awesome!

[Kaotic Lazagna]

for now though -- it's time to go to the track. :thumbsup:

Can't wait to see this at the track in person. hahaha, we'll see how much slower my car is. hehehe.

[LtNoogie]

This car will surprise alot of people at whatever autocross you enter, Garm. They're all getting used to two slow blue Yarii using up a perfectly good track.

[tk-421]

Awesome numbers, Garm! Can't wait to see this Yaris ripping some pavement.

[cali yaris]

noogie, I can go anytime now. :thumbsup:

Thank you to everyone, your support kept me motivated the couple of times I felt like it wasn't going to ever get done.

[PHXDEMON]

300+ horsepower Yaris. You're nuts man :laugh:

[TheRealEnth]

time for 350hp mark =)

[cali yaris]

^ soon. Got some driving to do first, though.

[minired5stby]

Take it to the Redline Time Attack on November 14-15 @ Auto Club Speedway in Fontana.

[eTiMaGo]

Take it to the Redline Time Attack on November 14-15 @ Auto Club Speedway in Fontana.

awesome idea! let's see it devour some "proper" sports cars :biggrin:

[Parmas]

http://www.youtube.com/watch?v=SeGevOKBNxQ

:clap: Well done garm and great results. Now is the time for a street video eh!

[Galavoxx]

Not much else I can say but... damn!!!

[Altitude]

These will surely make your day at the track more enjoyable. You know, for when you shit your pants.

[marcus]

cant wait for your 0-60 run and ur 1/4 mile as well.. just a sick cycle carousel..:thumbup::thumbsup:

[rob323]

How's the torque steer?
Got an lsd in it yet?

[lilredrocket]

He has had one for a while

[TheRealEnth]

tokyo drift reference -.- lol

[wholenizz]

props! just saw this on ur twitter first. you the man with the plan!

[eTiMaGo]

oh it's not a plan anymore, it's a reality :biggrin:

[cali yaris]

^ ha, thanks. Having way too much fun right now. Tomorrow I'm going to play with the laptop and try to load the 13 psi map.

[eTiMaGo]

"In local news, Canoga Park resident Garm Beall was rescued today by firefighters, from the top of a tree. Apparently Mr. Beall had been experimenting with his car, a highly modified Toyota Yaris, when it exploded, propelling him 50 feet in the air. When interviewed, neighbors tell of hearing "More power!!!" followed by a maniacal laugh, right before the explosion. More details as the story progresses"

:biggrin:

[CtrlAltDefeat]

congrats garm! :bow::bow::bow::bow::respekt::respekt: can't wait to see it on the street... oh, and the kit? save one for me, k? :biggrin:

[lilredrocket]

Thomas that's too good!!!

[CASTREX]

"In local news, Canoga Park resident Garm Beall was rescued today by firefighters, from the top of a tree. Apparently Mr. Beall had been experimenting with his car, a highly modified Toyota Yaris, when it exploded, propelling him 50 feet in the air. When interviewed, neighbors tell of hearing "More power!!!" followed by a maniacal laugh, right before the explosion. More details as the story progresses"

:biggrin:

:bellyroll::bellyroll::bellyroll:

[Kaotic Lazagna]

LMAOROFL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Slick]

I WANT VIDS! Street, track, parking lot idc. I wanna see this thing on the ground.




Garm's favorite quote "I dont drive fast.... I fly low" :)

[kurokoma-kun]

"In local news, Canoga Park resident Garm Beall was rescued today by firefighters, from the top of a tree. Apparently Mr. Beall had been experimenting with his car, a highly modified Toyota Yaris, when it exploded, propelling him 50 feet in the air. When interviewed, neighbors tell of hearing "More power!!!" followed by a maniacal laugh, right before the explosion. More details as the story progresses"

:biggrin:

:bellyroll::bellyroll::bellyroll:

way to go Garm :drinking:

[etheliters]

(speechless):respekt:

[PETERPOOP]

you can't deprive us of videos. this just isn't right........

[cali yaris]

I'm sorry, I know I'm letting you down. :smile: I either need (1) more friends or (2) a cam mount in the car.

[PETERPOOP]

:P

Man, if i lived by you, i'd have an entire production crew to film your car. There's gotta be some people on the board willing to film your car!!!!!!!!! ahhhhhhh. Can't you make your employees do it. ;)

[Penguin Garage]

Garm,

First off congrats on the new tune.

Is it possible to get a complete parts list of what went into this motor build?

I've been trying to follow but I have a feeling I missed some goodies you added. :)

keep it up.

[Parmas]

^^ +1 :headbang:

[eTiMaGo]

:P

Man, if i lived by you, i'd have an entire production crew to film your car. There's gotta be some people on the board willing to film your car!!!!!!!!! ahhhhhhh. Can't you make your employees do it. ;)

He'd ask JR to do it but then it'll be hard to clean up the stains... :barf:

[cali yaris]

what kind of stains... ewwww

[TheRealEnth]

interesting...

[crxgames]

Pretty impressive...

Keep an eye on that plastic manifold. I've seen bad things happen to them above 15psi. A friend of mine had one explode, and I've seen them with serious stress marks.

[Parmas]

Hey garm I wish to ask a couple of question about your setup....

I never heard you mention the flywheel? Did you lightened it or still using stock?

What Type of Spark plugs you are using? How much they are rated?

Oil cooler?

When you say mod the Aem for VVT what do you mean?

Are the valves and springs still stock on 20psi?

[changchewsoon]

got her up to 310, then backed off for a better curve.

303 whp / 284 torque @ 20 psi

http://www.microimageonline.com/images/garm/DYNO-82309-20psi.gif

hi garm, congratulations and nice one! :)

noticed the correction factor ratio (tfc) is at 1.00, does it mean there isn't any correction applied to the figures? (or if there is any needed???)

[cali yaris]

I don't know that, it was a chassis dyno if that means anything. I can certainly ask.

[scioncrew]

total correction factor (tcf) inter your drivetrane loss % to find out actual hp

[GnomeBody]

at 300hp thats something like what, 1hp per 7lbs... sick:bow:

[CASTREX]

So when are we having some 1/4 mile times and track videos???

[talnlnky]

no joke... i'm watching this thread just to see 1/4mi time and speed.

[The Spectacle]

300hp would be about 280-285hp on a dynojet. With that kind of power, the Yaris should ET in the low 12's (assuming any semblance of traction) and trap about 115mph.

You still on stock transmission? How do those long ass gears feel in boost? Also, I missed the EMS you're using...I think you converted your wiring harness over to a TC or something like that to use their AEM?

[Lafiro]

Wow, I am amazed at the work. Way to go Garm, keep up the great work. Good stuff to rear. Can't wait to hear from you with more updates!

[cali yaris]

I think a DynoJet (rollers) would show higher hp, not lower. That is my experience with them, anyway.

Still on stock trans, and I am liking the gears with this much power. We ripped out all factory wiring, and re-wired by hand for the AEM EMS.

[RUFFSTUFF]

You can tweak a Dynojet to read anything you want within reason. Gimme an Eddy Current dyno FTW.

[The Spectacle]

I think a DynoJet (rollers) would show higher hp, not lower. That is my experience with them, anyway.

Still on stock trans, and I am liking the gears with this much power. We ripped out all factory wiring, and re-wired by hand for the AEM EMS.

You are correct sir. I was thinking of a Dyno Dynamics and Mustang dyno's (both read low compared to DynoJets).

What kind of boost control you running? If you plan on taking it to the track, hope you got the boost by gear setup in the AEM with a MAC/AEM solenoid!

[cali yaris]

AEM tru-boost controller/gauge. A/B settings for 13 psi/20psi. AEM solenoid.

it's just ok, I'm not thrilled with it just yet, but it does hold boost where it's supposed to be, and I did get a pretty nice power curve.

[PETERPOOP]

videos....

[puetato89]

+1