Dual cold cathode light installation

[jaimico]

I just got a dual cold cathode light (blue) to installed as the one toyota has under the dash, but I want to wire it to the car´s lights, any point that I could use?

[CTScott]

So it turns on with the interior lights or with the headlights?

[jaimico]

the headlights, it has a independent switch, so i could turn on/off as I please.

[CTScott]

I would use the white wire in pin 13 of the headlight switch connector for +12V and the white with a black stripe wire in Pin 10 as your ground.

27939

[sqcomp]

Those are also great to use as rear plate lights. You see them on the Lexus GS models.

[IsLNdbOi]

Been wondering if anyone has used a 4" cold cathode in place of the puny single bulb / LED for the rear plate...

[sqcomp]

The dual 4" bulbs can be used I'd imagine. Most computer supply stores sell them with ballasts for under $10. Lexus sells one bulb for $95...

[jaimico]

ok, thank guys, and yes they do come cheap if you buy them on a computer store.

I wolud like to get a red one too for the 3r brake light, and if you installed it a flasher, you can get the F1 car brake light look alike.