Yaris stereo change PDFs

[YarisBueller]

For the sedan I believe.. ?

[Sp33dY]

Excellent find! Wheres the rest of the workshop manual!?!?! :D

[cburac]

I was wondering if you have the workshop manual for the rear spoiler instalation?

cheers

carlos b.

[MacMaster761]

found more helpful pdfs for everyone!

these are for the parts removal of the liftback

[fnkngrv]

Very nice....looks like a lot of clips that could get broken in the removal process I am wondering....

[ebowers83]

Those directions werent helpful at all. All they tell you is how to remove everything! I'm so confused!

[vodkalush]

Very nice....looks like a lot of clips that could get broken in the removal process I am wondering....

so far from everything I've removed (entire center console, and all the stereo/dash gauge console) all the clips are pretty sturdy and you'd have to really force them to go the wrong way before breaking them... atleast thats what my experiance has been.

just remember dont just rip stuff out, slowly but firmly pull out 1 clip at a time from bottom ==> top.

[vodkalush]

Those directions werent helpful at all. All they tell you is how to remove everything! I'm so confused!

well what else arent you sure about? As far as instation is concerned you will have to simply follow the directions that came with the new equitment
(or visit their website) , and then reverse the disassembly instructions to put it all back together.....

[atebit]

For the sedan I believe.. ?

This file (0370011.pdf) shows there are 3 connectors on the integrated radio, but only two on the non-integrated radio. Can someone tell me what each of these connectors are for? If I wanted to replace the integrated radio with an aftermarket HU, do I need a different/special harness because of this?

My guess (hope) is that the "third" connector is for the extra pair of speakers if you have the six-speaker system, and that I can just disreagard it if I only have 4 speakers....

[jbll]

This file (0370011.pdf) shows there are 3 connectors on the integrated radio, but only two on the non-integrated radio. Can someone tell me what each of these connectors are for? If I wanted to replace the integrated radio with an aftermarket HU, do I need a different/special harness because of this?

My guess (hope) is that the "third" connector is for the extra pair of speakers if you have the six-speaker system, and that I can just disreagard it if I only have 4 speakers....

I have the 6cd changer and there is 3 connectors on the back on the stock radio. When i changed my HU, i didn't pluged the third connector...
But I really don't know what the tird connector if for...

[barryware]

But I really don't know what the third connector if for...

One connector is for power, acc power, ground, and front speakers. The second connector is for the rear speakers. The third connector you are referring to is for the Aux input. I don't have a CD changer but there are a total of 4 connectors on the stock radio. One mine, one had no connection and that is for the cd changer I believe.

I just replaced my stock radio with a deck that has an aux input in the back. That is how I know about the third connector. I had to connect that to the new deck for aux input.

[rsoaramud]

hi all, just asking for yaris 2007, can somebody help me, is it possible to change the odometer same as 2010 model? my yaris 2007 only has the speedmeter i want to change it to 2010 model is it possible?

[syntax]

hi all, just asking for yaris 2007, can somebody help me, is it possible to change the odometer same as 2010 model? my yaris 2007 only has the speedmeter i want to change it to 2010 model is it possible?

need to change the whole cluster, or install a separate tach... :biggrin:

[Navigator17]

Do we have a PDF that Explains Harness Wirings and what each Color Wire Does - I have a Toyota Yaris 2011 - NCP90R - and i want to understand which Wire Does what -
Reason i am saying this because i have installed a out of market Head unit but Speakers only work when i move my Car key beyond the End which is wiered or my Headunit doesnt turn off even when i have switched off the car - Here are the Wiring i have