PDA

View Full Version : Throttle Body Spacer??

ozmdd
09-26-2009, 04:45 PM
Is anyone aware of a throttle body spacer made for the 1.5 Yaris? I checked-out an OBX made for another toyota 1.5, but the shape was wrong, and the size. Only 3 bolt holes.
YarisPR
09-26-2009, 06:46 PM
Is anyone aware of a throttle body spacer made for the 1.5 Yaris? I checked-out an OBX made for another toyota 1.5, but the shape was wrong, and the size. Only 3 bolt holes.

It has 3 bolt holes because it's made for non-electronic Throttle (echo Scion Xa Xb).
tk-421
09-26-2009, 06:53 PM
There's currently an ongoing project to bring these to the Yaris:
http://www.yarisworld.com/forums/showthread.php?t=15949
1NZYaris1
09-26-2009, 08:46 PM
Would this one work :redface: it's a 1zz throttle spacer
lilredrocket
09-27-2009, 02:40 AM
You need the 1ZZ tb for this one to work
jouna
09-28-2009, 06:10 PM
so i can put this if i have the 1zz tb in the yaris intake mani?
tk-421
09-28-2009, 08:28 PM
You could, but you would need to port match the mani for best results.
The spacer being manufactured by AlexNet0 will be plug-and-play for the 1NZ mani and 1ZZ TB.
mikenacarato
09-28-2009, 09:23 PM
i made a spacer for my car and ran into fuel problems. the spacer was 1/8" and it kept throwing a lean code. i solved it by getting 1zz injectors. just a heads up
jouna
09-30-2009, 12:32 AM
i made a spacer for my car and ran into fuel problems. the spacer was 1/8" and it kept throwing a lean code. i solved it by getting 1zz injectors. just a heads up

another point in changing to 1zz injectors...glad i did that
Lafiro
09-30-2009, 11:38 AM
Someone please explain what the spacers do? And why it causes the A/F ratio to be different.
cali yaris
09-30-2009, 11:40 AM
The spacer being manufactured by AlexNet0 will be plug-and-play for the 1NZ mani and 1ZZ TB.

I see the thread with people interested - does he have enough people to confirm he's producing it?

I also thought that the purpose of his project was to make a spacer thick enough to support a NOS nozzle.
tk-421
09-30-2009, 11:57 AM
I see the thread with people interested - does he have enough people to confirm he's producing it?

I also thought that the purpose of his project was to make a spacer thick enough to support a NOS nozzle.
I think there's enough interest, but I heard they had a setback due to the CNC machine that they purchased.

I hope they can do this soon enough, because I'm getting ready to install the NOS kit that you sold me. I still need to know which pieces I'm missing though...