Lowered today on tein springs...pics and alignment question

[Brentorius]

Install went really well, the 17mm nut on the top hats were a pain! I had it aligned and they told me my rear toe was out of spec and non adjustable. I also have 12mm rear hub spacers.

Does anyone else have any rear toe issues or tire wear issues on teins? Toe specs from the shop: Rear Left .44 degrees and Rear Right: -.12 degrees

Before
http://www.mazda-speed.com/albums/Yaris/before_angle.jpg
http://www.mazda-speed.com/albums/Yaris/before_side.jpg

After
http://www.mazda-speed.com/albums/Yaris/after_angle.jpg
http://www.mazda-speed.com/albums/Yaris/after_side.jpg

Friends Mr-2 Spyder
http://www.mazda-speed.com/albums/Yaris/spyder.jpg

[Gideon]

No help on the alignment, but just had to say looking good!

MR2 is nice as well. I spy a Midship Runabout front emblem I do believe. :smile:

[Brentorius]

No help on the alignment, but just had to say looking good!

MR2 is nice as well. I spy a Midship Runabout front emblem I do believe. :smile:

You are correct :wink:

[ozmdd]

Garm sells the rear camber rings that will allow you to get the toe and camber set where you need it. Cheap and easy, but best to take them to your alignment guy to be installed.

www.microimageonline.com

[ozmdd]

BTW - what rims are those? Look like TE-37's w/o stickers....

[yarisugi]

Probably Rota Grids

[Brentorius]

Probably Rota Grids

Yes 15" rota grids

[minired5stby]

Lower is always better.

[Kaotic Lazagna]

Looks good, but I didn't have any alignment issues. In fact, I drove for a year before I got an alignment done, and that's because the highways in my area became craptastic when they started to repave them that I think it threw off my alignment enough to suddenly cause tire wear.

[kuyachris84]

yay for yellow! :thumbup:

[markrg07]

im an alignment tech and un fortunetly there are no after market kits to fix rear toe. i have lowered my yaris and have the same issue. i lowered it wit trd springs

[90tsi]

i lowered mine on teins and havent had any issues with tire wear.

[Brentorius]

i lowered mine on teins and havent had any issues with tire wear.

Nice. I am not going to worry about it too much then :thumbsup: