GI: RBK LB BODYKITS

[tk-421]

I am trying to gauge interest to see if enough people would be interested in a full EIGHT PIECE bodykit. The base designs come mostly from the Thai kits that MicroImage has produced, but with a few modifications design-wise and completely reworked as far as materials.

FRONT BUMPER:
http://www.yarisworld.com/forums/attachment.php?attachmentid=12008&stc=1&d=1226603496

Now that I have the bumper in my hands, I have decided to make a couple of modifications to it in order to make it a bit more unique, namely widening the upper grille to the edges (RS style, same width as the lower grille), and splitting the front lip to break up the lines just a little bit (Diablo style). I am undecided if I should modify the corners in front of the wheels or not just yet.

Functionality-wise, I am thinking I should modify the design to accommodate USDM front crash bars.


REAR BUMPER:
http://www.yarisworld.com/forums/attachment.php?attachmentid=29136&d=1255411468

Functionality-wise, I am thinking I should modify the design to accommodate USDM rear crash bars, as well as lifting it a bit to accommodate other exhaust configurations.

SPOILER:
28988

HOOD:
http://i372.photobucket.com/albums/oo163/ctscott329/HoodDesign1.jpg

EYELIDS:
28987

SIDESKIRTS:
As far as the sideskirts, I am open to suggestions, since those would probably be custom designed from the ground up.

As far as the materials go, they would be made of Grade-A fiberglass and resins (the best in the business). Those who have purchased pieces from me in the past can attest to the quality that we bring to the table.

OFFICIAL LIST =====================
Please make sure that you are on the following list if you're interested at all:
http://spreadsheets.google.com/pub?key=tXRZcifTeFIAx-AWPImwh_w&output=html
People on that list will get special introductory pricing.
==============================

Just as a note, final price would definitely vary depending on the number of interested parties, so please don't worry about price right this moment.

Thanks for looking. Please be sure to vote if you're interested! :respekt:

[mrbond]

now, has the hood already started development? I'd like to see the scoop a little off-center, kinda like the turbo kei cars in Japan.

[tk-421]

Nothing is set in stone yet. I'm in talks with Garm to see if I can do the hoods for him.

The hood scoop idea may be doable if enough ppl go for it (I can only do a single mold per model, two for sandwiched pieces).

[ezhacker1]

ooh, our very own body kits. I like I like. Im down for all of them, to see how much it'll cost, and cut costs down for everyone.

[cali yaris]

great ideas - please get back to me about the hoods.

[tk-421]

YGPM :thumbsup:

[Kioshi]

Would you be able to do a rear bumper from the Thai replica RS model? With the reflectors and all? Not feeling the INGs body kit

I would so be in it if you take that route. My main concern since the beginning was the whole crash beam in the rear, to remove and fit the JDM RS rear bumper....

But if you come through, for a direct fit.....shit I'm interested.

[puetato89]

rear bumper guinea pig?? :smile:

[Kioshi]

Sure, if I can meet TK half way where he lives, I'm down...or send it to Garm and I can come to SoCal. I'll be taking a semester off next spring, so I got TIME..

[contraband831]

Any chance of getting simple front lip (or lip kit) made? kind of like the one that 03Z33 had on his LB?

[tk-421]

The lip kit is a possibility, but it may take a while to get enough ppl interested in the project.

[tk-421]

Would you be able to do a rear bumper from the Thai replica RS model? With the reflectors and all? Not feeling the INGs body kit

RS rear is also very nice. I'm down for that design if ppl prefer. I really dig the Ings design though... Something about that dual tone that just makes me :drool: uncontrollably...

But if you come through, for a direct fit.....shit I'm interested.
It will be a direct fit. I just hope I don't need to do too much tweaking so I can come to market ASAP.

[Tamago]

front is sick!

tk, come to AIM, i think i have some business in the MR2 world for you

[Nexus1155]

That would be awesome if this went through, I say keep the scoop as it is. Good for TMIC setup :)

[cali yaris]

that is the winning hood design from Micro Image's contest, it was chosen from over a hundred entries. :smile:

A lip kit would rock and is the most asked for thing in cosmetic styling. TK, it's also the easiest to produce, and to ship. Consider it!

[tk-421]

A lip kit would rock and is the most asked for thing in cosmetic styling. TK, it's also the easiest to produce, and to ship. Consider it!

Definitely in the radar. I need 10 ppl to commit in order to build a mold for it though, and that's where things tend to go south with my Yaris peeps.

I still love ya guys though. :biggrin:

[1NZYaris1]

You know me , anything to look great but different :thumbup:
but i think shipping is the major problem :redface:
best of luck TK .
come on people , you can't beat the quality from TK ,
take it while the offer is GOOD :thumbsup:

[frownonfun]

any chance this could happen for the 09s and 10s? seeing as you guys with earlier models already have kits to choose from.

[tk-421]

Everything except the front bumper would be plug and play for the 09+. The front bumper may prove to be a bit of a challenge though...

[toad]

why no sedan love? i've been looking for a front bumper for a while!

[PETERPOOP]

your plans with that rear Ings bumper is exactly what i wanted to do, but wouldn't have time for. since it's fiberglass, it wouldn't have been that hard. I wanted to get rid of those stupid rocket boosters on the side and leave everything else on it, as is.

I would buy that rear bumper if garm could ship it to me for a fair price. ;)

[tk-421]

I agree that modification wouldn't take much effort... It's the crash bar that I'm more worried about.

[bwong2]

Everything except the front bumper would be plug and play for the 09+. The front bumper may prove to be a bit of a challenge though...

i thought the rear bumper was different too. :iono:

[tk-421]

It is a little different, but I don't think the minor change in the rear warrants another mold. We may be able to make the change after each piece has been baked.

I need to do more research on this for sure...

[puetato89]

It is a little different, but I don't think the minor change in the rear warrants another mold. We may be able to make the change after each piece has been baked.

I need to do more research on this for sure...

Mid Wing :)

[tk-421]

Moved widebody-related stuff here:
http://www.yarisworld.com/forums/showthread.php?t=23018

why no sedan love? i've been looking for a front bumper for a while!

Get me 10 people commited to buy it and I'll try my best to get you one made. :thumbsup:

[tk-421]

BTW, if you guys are interested in a widebody style, please add yourselves to a list... The longer the list, the more interested we will be in fabricating the requested items for you.

[Mouse]

Lip kit please...Preferably something that attaches to the bottom of the bumper.

[CTScott]

I would be mighty nice (although I fully realize the mold costs) if you could do a version of the front and rear bumpers for the 09+ cars.

[Astroman]

No lips for me, I want a replacement! I already have eyelids & a killer spoiler so I'm good. Would love the rest though. I messed up my rear bumper so instead of paying and getting it fixed stock, might as well pay and get something sweet.

[TheRealEnth]

Yeah, Everything except the spoiler, Most people have spoilers already =D

[tk-421]

Interest looks pretty strong so far... Keep it up guys!

[advocate]

Already have a spoiler and don't like the eyelids but bumper / skirts / rear fender / hood definitely!

[frownonfun]

I would be mighty nice (although I fully realize the mold costs) if you could do a version of the front and rear bumpers for the 09+ cars.

same... which is what i was saying in my previous post. it's only a matter of time before the newer body style out numbers the old so why can't someone make a kit for us already?

[TheRealEnth]

because thats a lie! The newer style will never outnumber us ! The Original
!!

[tk-421]

If we can get 10 people to buy an 09 kit then I have no problem fabricating one.

[CTScott]

If we can get 10 people to buy an 09 kit then I have no problem fabricating one.

If you get the look right, I'll send the money before you even cut the mold. One thing I would really like is to still be able to use the fog lights. I'd be mighty happy with a clone of the 09 TS bumper:

http://www.zoopedup.com/blogs/uploads/1.8ts%20red0.jpg

[frownonfun]

you can count me in for an 09 kit as well assuming the look is good. i also like the TS bumper but don't know that i'd want an exact clone. but i would prefer a complete bumper and not a lip kit. i'd really like to see something that makes it look sportier without going too extreme and something that gives it a lower look in the front.

personally i'd love this one with the bottom black lip pieces all part of the one mold...

http://www.microimageonline.com/images/products/cosmetic/bodykits/kavint/installed-2.jpg

[tk-421]

That front bumper is sick. I agree that the extra black lip kit would have to go. The only problem is that I already have a Burnout bumper to work with, but I could work on a bumper based on the KavinT design as well if there is enough interest.

[IsLNdbOi]

I'm interested in a kit for my 5-door '09. Would it come painted or unpainted? I'd want one that doesn't look over the top / too extreme and that would work with fog lights w/o having to mess with the stupid shrouds.

[tk-421]

The kit would most likely come unpainted since there are too many color variations between countries.

The Burnout front bumper allows for foglights and no shrouds are needed. Heck, you can pretty much buy any foglight kit (even non-Yaris models) and it should fit nicely.

[IsLNdbOi]

How much do Toyota dealers' collision centers / body shops usually charge to paint a front bumper, rear bumper and side skirts?

[tk-421]

By the way, it seems there are already 3 people interested in an 09 kit. If we can get 7 more people committed to buying a kit then I will come through and make one for you guys (based on the same components).

[PETERPOOP]

no matter what, please make it so there are no holes or bumps for a front license plate to go..

http://www.microimageonline.com/images/products/cosmetic/bodykits/rs/rs-frontbumper.jpg

http://www.microimageonline.com/images/products/cosmetic/bodykits/c-one/c-one-frontbumper.jpg

[tk-421]

good idea... I kinda hate those too.
what do you guys think? bumps or no bumps?

[cali yaris]

no bumps, people that have to (like us here in CA) can still install a front plate. I'm jealous of those that can have a nice clean front end. :frown:

[PETERPOOP]

Didn't know it was possible for Garm to be jealous of any other yaris!!!!!!

[1NZYaris1]

That front bumper is sick. I agree that the extra black lip kit could go. The only problem is that I already have a Burnout bumper to work with, but I could work on a bumper based on the KavinT design as well if there is enough interest.

:eyebulge:i would put my hand up :thumbup: , but i think shipping would really kill me
unless i bought it back as hand lugage :thumbsup:.
then i would need to bring back 2 or 3 to pay for the trip :laugh:

[tk-421]

That can be arranged. Let me know if you want to go that route and we'll figure something out. :thumbsup:

[ezhacker1]

By the way, it seems there are already 3 people interested in an 09 kit. If we can get 7 more people committed to buying a kit then I will come through and make one for you guys (based on the same components).

any pricing for a 09 kit? i might be down for it once i know a price range. O and correct me if im wrong, but the 2010s look like same as 09s so that might help for more interest.

[1NZYaris1]

are you doing sketches of the bumpers first ,
or just going straight to Bondo and having a play :laugh:
i have seen the quality of your work so i am sold almost

[thewifesyaris]

I would hands done kill someone for a spoon duckbill style spoiler for the Yaris. You make that and consider one already sold to me!!!

[tk-421]

are you doing sketches of the bumpers first ,
or just going straight to Bondo and having a play :laugh:
i have seen the quality of your work so i am sold almost

The front bumper will use the Burnout front as a base. I have already drawn the proposed changes on top of the bumper... What do you think so far? (sorry for the crappy pics / quick sketches)

A bit more opening up top...

29133

This is the bottom lip... I want to recess it a bit (Diablo style, but not as extreme):
29131

29132

Diablo front lip:
29135

[tk-421]

I would hands done kill someone for a spoon duckbill style spoiler for the Yaris. You make that and consider one already sold to me!!!
I've heard quite a few requests for this spoiler... It has a good chance of getting fabbed. :thumbsup:

[PETERPOOP]

I need a PS'd pic. I can't visualize that very well.

I don't see a problem with the upper grill, besides it will make it more of your "own" design if you change it. It seems it won't look as aggressive if the gril is opened as you have it showed. However, i'm not quite sure yet; i'd need a PS'd pic or to see the final product before I say anything else.

[tk-421]

any pricing for a 09 kit? i might be down for it once i know a price range. O and correct me if im wrong, but the 2010s look like same as 09s so that might help for more interest.

Still working the numbers on the kit... Keep an eye on this thread for updates.

4 people interested in the 09+ kits so far...

[tk-421]

I need a PS'd pic. I can't visualize that very well.

I don't see a problem with the upper grill, besides it will make it more of your "own" design if you change it. It seems it won't look as aggressive if the gril is opened as you have it showed. However, i'm quite sure yet; i'd need a PS'd pic or to see the final product before I say anything else.

Thanks for your input. I'll try out a photochop and post it soon :thumbsup:

[tk-421]

This is my idea for the bumper so far:


BEFORE
29138

AFTER
29136

[PETERPOOP]

EXACTLY what i wanted. Send me mine please.

[tk-421]

... and my idea for the front:

BEFORE
29139

AFTER
29137

(something isn't looking quite right on that chop...)

[advocate]

I can't see any differences between the chopped ings+1 bumper and chopped diablo front unfortunately.

I would like to inquire about whether or not the new bumper is going to have spots for fog lights or not. I think it would be silly to make one without.

[tk-421]

I can't see any differences between the chopped ings+1 bumper and chopped diablo front unfortunately.

I added before/after pics above to make it clearer. :thumbsup:

I would like to inquire about whether or not the new bumper is going to have spots for fog lights or not. I think it would be silly to make one without.

The Burnout front bumper has spots for foglights. I think it has enough space to fit two on each side actually. :biggrin:

[tk-421]

Another idea for the upper grille would be to make it straight, such as with the C-ONE bumper:

29140

Or we could try something completely different and integrate this cover into the design:

29141

Just throwing ideas out there... I realize some of these might not be popular, but that's what brainstorming is all about. :smile:

[teejay]

how many ppl would be needed to get a lip kit made?

[CTScott]

I'm sure everyone will have slightly or significantly different wants in this, but I'm definitely one for keeping the fogs, and although it may seem silly, I like the idea of keeping the Toyota or Netz badge on the front. Also, I like the narrower grill opening. The split spoiler looks good.

The rear looks good.

[gmodder]

Put me up if you make a kit that works with 09 LB...

[tk-421]

how many ppl would be needed to get a lip kit made?

10 people minimum

I'm sure everyone will have slightly or significantly different wants in this, but I'm definitely one for keeping the fogs, and although it may seem silly, I like the idea of keeping the Toyota or Netz badge on the front. Also, I like the narrower grill opening. The split spoiler looks good.

The rear looks good.

The fogs are staying. As for the badge, it may be difficult to integrate to the design, since it originally comes with the badge placeholder shaved.

Put me up if you make a kit that works with 09 LB...

5 people interested in an 09 kit now... getting close

[advocate]

Thanks for the before and after shots TK I see the slight differences now. I think they are both great improvements. Also just want to agree with CTScott on this part:

I like the idea of keeping the Toyota or Netz badge on the front.

[PETERPOOP]

So what is needed for the modification of that INGs bumper to actually happen and get on my car? Me paying for the INGs bumper PLUS the labor to modify it? And shipping ofcourse.. errr

[tk-421]

No, not at all... Everything is being built from scratch. The materials will be better. I'm just using some of my favorite pieces as a base design.

[PETERPOOP]

So we definately have enough demand for that rear bumper, correct? Seeing that it is leading the Poll results. So is that a definate product you guys will be making? Or does it still need 10 people to sign up on some type of GI thread or something.

[tk-421]

So far it has the best chance of being fabbed. I would like to see if I can offer these as part of a kit with special intro pricing first. After that the pieces would be offered individually.

[tk-421]

Here's the current voting results in spreadsheet form:
http://spreadsheets.google.com/pub?key=tXRZcifTeFIAx-AWPImwh_w&output=html

[puetato89]

very nice spreadsheet

[tk-421]

Haha thanks... Need it for the fabricator. :thumbsup:
Anyone else interested? I'm getting close on the pricing...

[fmicle]

What materials are we talking about for these pieces? I am really digging that hood with the scoop in the middle. I am curious if we are going to drop a few lbs of weight by switching from metal to something lighter. I am really willing to pay a deposit for that hood (the one from the red car, with the opening in the middle) :drool:

That looks so good, it would have to be first on my list. Second would be the bumpers and side skirts. I was even considering getting the 09 lip kit from the dealer and installing them over the stock bumper, but I'm thinking that a 1 piece approach would be better. More solid, less weight than 2 pieces put together. Right? :smile:

[tk-421]

What materials are we talking about for these pieces?

We use grade-A fiberglass and resins... Literally the best fiberglass manufacturing process in the business. Nothing like some of the cheapo stuff that floats around eBay sometimes. The fabricator that does these is truly a perfectionist at heart and really takes his time on every piece.

I am curious if we are going to drop a few lbs of weight by switching from metal to something lighter.You won't be saving much weight with a fiberglass hood, since it needs to be thick enough to resist warping when temps fluctuate. Besides, the OEM hood is already quite light to begin with.

I am really willing to pay a deposit for that hood (the one from the red car, with the opening in the middle) :drool:I hope more people follow your lead, since we will definitely need deposits if we're gonna be making everything from scratch. I will be posting more info on pricing very soon.

but I'm thinking that a 1 piece approach would be better. More solid, less weight than 2 pieces put together. Right? :smile:It's definitely better to have one piece instead of two, but no so much because of the weight factor... Rather, it is stronger and there's potentially less mess involved when installing the piece.

[tk-421]

Everybody please make sure that you are on the following list if you're interested at all:
http://spreadsheets.google.com/pub?k..._w&output=html (http://spreadsheets.google.com/pub?key=tXRZcifTeFIAx-AWPImwh_w&output=html)

People on that list will get special introductory pricing once I have the prices ready. :thumbsup:

[frownonfun]

i'll take a hood for sure and most likely a rear bumper as well.

[tk-421]

I would hands done kill someone for a spoon duckbill style spoiler for the Yaris. You make that and consider one already sold to me!!!
I have started a list for the duckbill spoilers, and I may ȧlready have a wing available for the mold. Please make sure you are in the following list if you're interested:

http://www.yarisworld.com/forums/showpost.php?p=402260&postcount=12

[LoadThis]

Im in need of a front bumper for a 09 grey sedan....so if anyone is getting in on this and wants to sell me their stock bumper you'll have some extra cash for this project.

Its cool you guys have options, i had no idea there was such a yaris folowing, im just lookin around on here for the gf to get her car fixed up

[tk-421]

Im in need of a front bumper for a 09 grey sedan....so if anyone is getting in on this and wants to sell me their stock bumper you'll have some extra cash for this project.

Sorry, but this thread is exclusively for liftbacks. I might do some sedan parts a bit later on if there's enough interest.

[tk-421]

Thanks for all the votes! I think the bulk of the votes have been cast, so I will start crunching some numbers soon.

OK, for all those people that are looking for a lip kit, what do you think about this one?

Rear Lip
Basically, I'm looking for something like this:

https://docs.google.com/a/bernardokuri.com/File?id=dgkmt2h2_1875s4jbfdhttps://docs.google.com/a/bernardokuri.com/File?id=dgkmt2h2_19f7qmk4dt

I don't want the kit to stand out at all... Just the opposite. Clean lines, and make it blend with the stock lines as much as possible:

https://docs.google.com/a/bernardokuri.com/File?id=dgkmt2h2_16cbgvvqgjhttps://docs.google.com/a/bernardokuri.com/File?id=dgkmt2h2_17cxppqj22

Front Lip
What I like about this front lip is that it can look good with or without sideskirts:
https://docs.google.com/a/bernardokuri.com/File?id=dgkmt2h2_20dvnrdxcb

Here's one that has some features that I like:
https://docs.google.com/a/bernardokuri.com/File?id=dgkmt2h2_238nc2nmgd

This is a sedan front, but I think it would look awesome in an LB as well (matches nicely with the rear lip from a few pics before):

https://docs.google.com/a/bernardokuri.com/File?id=dgkmt2h2_21gdx67s68

[Mavix]

Yeah, If you can keep the kit looking clean and understated rather then all showcar riced out I'd be interested. Just might be hard to find 10 people that all want the same looking car :P

[gmodder]

Iam eagerly awaiting prices...i want this bad...

[RacerFreakXXX]

any thoughts on a custom lip for an 09+ bumper? I love my bumper but, I feel it could be a bit more aggressive w/o me spending tons of money on an Asian bumper and lip for 1k+

for an 07-08 or 09+ here is a quick photoshop of the bumper I would love to have ( notice the nice aero lip and a smooth front with big front intake holes), with a flush smoothed out rear bumper and kaminari sideskirts but more round and euro looking :D

http://i100.photobucket.com/albums/m14/racerfreakxxx/myyarisbumper1.jpg
http://i100.photobucket.com/albums/m14/racerfreakxxx/CIMG1308.jpg
http://i100.photobucket.com/albums/m14/racerfreakxxx/mysideskirt.jpg

here is an idea of the lip i want

http://i100.photobucket.com/albums/m14/racerfreakxxx/my09yarislip1.jpg

[RacerFreakXXX]

Also I can guarantee if you made this exact kit but to fit us spec yaris they would fly off the shelves

http://www.bulletproofautomotive.com/items/aeroover%20vitz%20front.jpg

[ezhacker1]

i wonder how they would look with the 09+ bumpers with those "mustaches"

[Kioshi]

Whats the status on the rear bumper design, RS or Ings TK?

I am interested, but seeing the final looks and placement on one's car will have me put out money. Hopefully enough people generate and make the effort in getting one so i can get one later. I'm not sad about the introductory price, as long as its the styling I'm looking for :)

Watching.....

[tk-421]

Any chance of getting simple front lip (or lip kit) made? kind of like the one that 03Z33 had on his LB?

That's a nice kit. Do you have pictures of the rear lip?

Whats the status on the rear bumper design, RS or Ings TK?

Still torn between those two designs. Modified Ings seems more likely though.

[frownonfun]

i prefer the ings but i'm kinda unclear on if a full bumper will fit the 09 so my opinion might not matter anyway.

[tk-421]

The bumper will fit 09's. I'll make sure of it. The modification needed is very minor and might not even need a full mold.

[frownonfun]

groovy... you might just be my new favorite YW member.

[1NZYaris1]

i would be keen on those 2 lips , the rear would sit nicely with my twin centre exit exchaust :drool:

[frownonfun]

ok so is the micro image hood already decided on for sure? after holding the design contest i was under the impression it was getting made anyway.

and if it is then would we happen to know how long it might be before it is available? i only ask because if it's gonna be a while i'm thinking of just buying the kaminari hood between now and then. but if we are talking about availability sometime before or shortly after christmas-ish then i'll just hold off.

[1NZYaris1]

ok so is the micro image hood already decided on for sure? after holding the design contest i was under the impression it was getting made anyway.

and if it is then would we happen to know how long it might be before it is available? i only ask because if it's gonna be a while i'm thinking of just buying the kaminari hood between now and then. but if we are talking about availability sometime before or shortly after christmas-ish then i'll just hold off.

From what i have been told , production of the mould is to start very soon ,
within a week or so ,which means realistically i would say ready for supply January ,
but maybe late December.
This is at a guess though :thumbsup:

[Yarimoto]

I'm liking everything so far. Front bumper picture looks nice especially since it has the same color as my Yaris. Smexy.

[gmodder]

You are also going to do a Lip kit right...Front-Rear-Sides...Because iam probably not going beable to afford the full Body kit anytime soon...

[tk-421]

The lip kit is a big possibility, but I still need to see more interest on it before I can get started.

[EleKid]

Sign me up as one of the ten 09s

[EleKid]

I have no idea how to sign up on that list though. How do I do it?

[Jochen]

I made a quick PS of the INGS rear bumper with the holes removed and also one on my car.
If you can make it like this, I'm really interested. The only problem will be shipping to Belgium...

(and it really fits with my spoiler :wink:)

http://www.de-smet.net/yaris/INGS+1-RBK.jpg

http://www.de-smet.net/yaris/INGS+1-RBK_2.jpg

[PETERPOOP]

great PS job. Makes me want it even more. ;)

[tk-421]

Sign me up as one of the ten 09s
Please add yourself to my list (the one on this thread). I will make a note of all the 09's later. :thumbsup:

[tk-421]

I made a quick PS of the INGS rear bumper with the holes removed and also one on my car.
Nice PS! That is exactly what I'm planning to do. Unless of course, ppl prefer the RS design better.

[fmicle]

Nice PS! That is exactly what I'm planning to do. Unless of course, ppl prefer the RS design better.

Where do I send the payment? :drool:

[Jochen]

Looks like I missed some pages of this thread. Now I see you already photoshopped your idea of the rear bumper. :)

The only different with my PS is that I also removed the hole for the exhaust tip (since the exhaust tip of a diesel has a slightly different position)

[fmicle]

I was just thinking about that actually.

TK, is the hole going to be there or will you change the design so that the exhaust tip clears the bumper edge fully?

[tk-421]

Good question! We should all think about this one...
Having a hole in there will probably be needed if you plan on having an aftermarket exhaust (or even just a tip) down the road.
I think we should keep it, but it's up to you guys to decide.

[alch3miss]

C-ONE.. is my personal fav.

[fmicle]

Alright then, let's keep the hole :smile:

[CtrlAltDefeat]

How hard would it be to add your own holes/indents if there's no hole to allow a wide range of aftermarket exhausts?

[lilredrocket]

Some people have center exit exhaust. Have to consider them. I'm not one but they are out there

[Sabretooth]

^^^

Being one with a Center tip exhaust, it makes sense to do similar to what the Kaminari kit does, accent the sides but leave enough room for a normal exhaust or a center tip

[PETERPOOP]

i want no cut out on the rear bumper. yah, what sabre said. you're betting off with a universal design.

[tk-421]

^^^

Being one with a Center tip exhaust, it makes sense to do similar to what the Kaminari kit does, accent the sides but leave enough room for a normal exhaust or a center tip

That's a good point. I will try to raise the bottom/center part a bit to accommodate for different exhaust positions. The only downside is that an extra rear lip may be required in order to be flush with the sideskirts.

[gmodder]

So i guess you still dont have a somekind of ballpark on the price of the full kit without the hood...Just would like know I might just beable to swing for the full kit by the time you have them ready...

[tk-421]

How much are you guys willing to drop on a full kit? I hope to be able to post the prices within the next couple of days, but I would really like to know what the general consensus is first in order to try to match that price as closely as possible. TIA

[gmodder]

How much are you guys willing to drop on a full kit? I hope to be able to post the prices within the next couple of days, but I would really like to know what the general consensus is first in order to try to match that price as closely as possible. TIA

I have no Idea what kind of price to put on this....Cause All i want is the sides/Fbumper/Rbumper..Seems like ive seem them on ebay fro 600.00 or so could be thinking of a crappy kit though...for like the 07-08's

[tk-421]

$300/bumper is not too far from my current rough estimate, as long as the current interest carries on to actual buyers. The big problem so far is being able to afford the actual molds in order to start fabrication.

What about the other pieces, guys? What would you consider to be a fair price?

[gmodder]

I would buy if you can do the whole kit FB/RB/SIDES for 6-700.00

[fmicle]

I've been eyeing some of the kits offered on www.bodykits.com and www.body-kitz.com, which range from $700 to $1,200, but I've had other priorities on the list so far, that's why I didn't get anything yet.

If the quality of these RBK kits will match that of the RBK spoiler (which I absolutely love by the way), I will consider getting the RBK set and I believe $600-$700 is a good place to start, for the whole kit.

My biggest concern with such big parts is fitment; and in this case I'd trust an RBK set more than the stuff mentioned above. I've seen pictures from the RBK spoiler development process and I'm a believer :smile:

[tk-421]

If the quality of these RBK kits will match that of the RBK spoiler (which I absolutely love by the way), I will consider getting the RBK set and I believe $600-$700 is a good place to start, for the whole kit.

A full RBK kit has 8 pieces (maybe 7, depending if the MI hood will be made by me or not), whereas the kits you guys are mentioning are only 4-piece kits. The price will be a bit higher because of a few factors, namely number of pieces, materials involved, consumer demand, and mold fabrication costs.

My biggest concern with such big parts is fitment; and in this case I'd trust an RBK set more than the stuff mentioned above. I've seen pictures from the RBK spoiler development process and I'm a believer :smile:Thanks for the props! I absolutely guarantee that the parts will fit perfectly.

[frownonfun]

i don't think a kit including a hood and spoiler could realistically be less than $1000. i'd expect a hood to be at least $300 on it's own. and the RBK spoiler is $175. that's close to $500 for just those two pieces. then you tack on a full 4 piece kit and you are talking at least 1k. and that's not including the eyelids. they don't seem like they'd drive up the cost too much though.

[lilredrocket]

I would say atleast $900-1000 for the 7 piece kit and tack on another $300-400 for the hood if you make it.

[Sabretooth]

I think the car is gonna look very busy with all these installed at once...

Could push beyond tacky.

[CtrlAltDefeat]

God I wish I could afford this kit and wheels... When my student loan comes in in Dec, I plan on buying some nice 17" lightweight summer wheels, which will cost me a pretty penny. My next upgrade might be a body kit, but there's no way I'll be able to afford both the wheels and a kit at the same time. (I refuse to buy a body kit while I still have stock wheels) I don't suppose you need a test/sponsored car in Indy? :biggrin:

[gmodder]

A full RBK kit has 8 pieces (maybe 7, depending if the MI hood will be made by me or not), whereas the kits you guys are mentioning are only 4-piece kits. The price will be a bit higher because of a few factors, namely number of pieces, materials involved, consumer demand, and mold fabrication costs.

Thanks for the props! I absolutely guarantee that the parts will fit perfectly.

Well all i need is the FBumper/RBumper/Sidesskirts. Does this mean you are only gonna make a 8 piece kit...which i dont need..

[CtrlAltDefeat]

I'm not sure how much I like the idea of a wider grill, but bigger vertically would look pretty good I think, I did a nasty photo chop on the pic to demonstrate what I mean. (I think i like the Netz badge in the center of the grille)

[EleKid]

So how many people do you have signed up for 09s so far?

[tk-421]

I think the car is gonna look very busy with all these installed at once...

Could push beyond tacky.

Trust me, once we get the team working on this, the full kit will look really good. :thumbsup:

[tk-421]

God I wish I could afford this kit and wheels... When my student loan comes in in Dec, I plan on buying some nice 17" lightweight summer wheels, which will cost me a pretty penny. My next upgrade might be a body kit, but there's no way I'll be able to afford both the wheels and a kit at the same time. (I refuse to buy a body kit while I still have stock wheels) I don't suppose you need a test/sponsored car in Indy? :biggrin:
Hopefully I'll be able to get the molds made so that more of you guys can get these later on. :thumbsup:

[tk-421]

Well all i need is the FBumper/RBumper/Sidesskirts. Does this mean you are only gonna make a 8 piece kit...which i dont need..
I'll be making at least 2 more pieces. The rest are either already made, or still pending review.

[tk-421]

I'm not sure how much I like the idea of a wider grill, but bigger vertically would look pretty good I think, I did a nasty photo chop on the pic to demonstrate what I mean. (I think i like the Netz badge in the center of the grille)
Yeah I'm thinking I want it both wider and taller. Wider because I can get to do something like this:

http://www.e-transport.ro/_files/newscustom/Toyota-Yaris-2009.jpg

... and taller because I think the Burnout might be a bit too narrow.

[tk-421]

So how many people do you have signed up for 09s so far?
So far you're the 6th:


CTScott
frownonfun
IsLNdbOi
ezhacker1
gmodder
EleKid


But I don't think I have you on my official list yet... Have you voted in the poll?

[EleKid]

Yes! I voted for a front bumper, rear bumper, sideskirts, and a hood.
But do you think you can place me on the list for the special introductory pricing?

[tk-421]

You got it! :thumbsup:

[EleKid]

Thanks! :biggrin: These are looking great. Any idea of when the finished product will come about? So I know how long to scrimp and save hahaha

[tk-421]

Looking at a late December/early January timeline in order to get everything done... Could be more, could be less...

[EleKid]

Not too far away. Looking forward to these :wink:

[tk-421]

5 days left... Be sure you are in the list before then if you want a discount. :thumbsup:

[Jochen]

About the rear bumper: Are you going to "remove" the hole for the exhaust tip (you can't really remove anything that isn't there :smile:)
I think it will be better to remove it just like some people said. That way people can cut it out by themself (in case they have center exhaust, L/R exhaust, or in my case a bit more to the right, ...) or just leave it like that with no hole.

And is there a difference between US and EU rear bumpers? So will it fit a EU Yaris?

[IsLNdbOi]

So that list I'm on above is also a list of people getting the discount?

[tk-421]

About the rear bumper: Are you going to "remove" the hole for the exhaust tip (you can't really remove anything that isn't there :smile:)

Still thinking about the best way to approach this...

And is there a difference between US and EU rear bumpers? So will it fit a EU Yaris?

As far as I can tell, EU and JDM bumpers are identical. This means that you probably won't be able to fit this bumper unless you get a USDM crash bar.

So that list I'm on above is also a list of people getting the discount?

Yup. You're good. :thumbsup:

[tk-421]

Just 3 more days to get your name on the list!

[Kioshi]

so are you still deciding to base the rear bumper off of the INGs rear bumper minus the stupid rocket booster holes?

Or have you done some contemplation on a direct-fit of an RS bumper style? <---- :D

Still taking interest, just the latter factor will make me fork out the green leaves...

[tk-421]

I think most people are into the Ings idea... But if you think about it, it doesn't look too different from the RS if we take out the "rocket boosters"...

Most of the effect you see is due to the dual-color paint job.

[IsLNdbOi]

Are you going to post pics. of the final design of the front and rear bumpers and sideskirts?

[Kioshi]

It's not, but i feel like the bumper goes inward where the black part meets...

I dont mind the two-tone color, I'd like to have the bayoublue color and the matte grey/black on it.... my 5zigen exhaust fits nicely w/ the hole cut-out....

I'm going to have to see if your version goes inward as well or straight down like the RS...

I dont mind importing an RS, i just would hate to have to get a JDM crash-bar or a C-One...then in an accident find that crash bar again...etc....lol

Your route is cheaper in the long run for me...

[IsLNdbOi]

I wonder how well my Tanabe Medalion Touring will fit w/ that cutout on the rear bumper.

[fmicle]

I wonder how well my Tanabe Medalion Touring will fit w/ that cutout on the rear bumper.

+1

[tk-421]

Are you going to post pics. of the final design of the front and rear bumpers and sideskirts?

I'll try doing some photoshops once everyone has made up their mind on what the final design should be.

It's not, but i feel like the bumper goes inward where the black part meets...

Good point... I kind of like that, but to each his own... :wink:

Your route is cheaper in the long run for me...

Oh yeah, it definitely will be.

I wonder how well my Tanabe Medalion Touring will fit w/ that cutout on the rear bumper.

I think it will look great, but the rear cutout may be removed on the RBK version, since some people may be running different exhaust configurations... Still not sure how we're gonna tackle that issue.

[tk-421]

Only two more days before I close down the list!

[IsLNdbOi]

I'm really just looking for a 4-piece body kit (front bumper, sideskirts, rear bumper) that has a rear bumper w/ an exhaust cut-out that will look good w/ my Tanabe Medalion Touring and a front bumper that won't need fog light bezels to install fog lights.

[tk-421]

The Burnout front bumper doesn't require bezels for the fogs. The rear cutout issue is still being investigated... We may have to raise the rear lip a bit to allow for any exhaust configuration you want/need...

[tk-421]

CTScott
frownonfun
IsLNdbOi
ezhacker1
gmodder
EleKid
H3LlIoN


Added H3LlIoN to the 09 list. :thumbsup:

[tk-421]

LAST DAY FOLKS
If you want a nice discount you need to be on this list!

[tk-421]

Only a few hours left!
If you want a nice discount once this show starts, you need to get in now!

[CtrlAltDefeat]

I so wish i could :frown::brokenheart::cry:

[1NZYaris1]

I so wish i could :frown::brokenheart::cry:

Payment plan $1. down and a $1. a day for three years :laugh:

[CtrlAltDefeat]

Payment plan $1. down and a $1. a day for three years :laugh:

works for me if he's up to it lol

[cali yaris]

Hey, what happened with this? Did I miss the new thread?

Well, the list is now CLOSED. Thank you everyone for participating!

I will be opening up a new thread in the coming days so that everyone can see the progress as well as final pricing.

[tk-421]

Still trying to figure out how to make these affordable enough for mass consumption. The molds are just too expensive to warrant a short production run...

On the flipside, I'm currently looking into making these in urethane.

[JumpmanYaris]

is that better then Fiberglass?
or the same ?

[Cosmonaut]

im sure urethane is better as it would allow it to flex and not break/crack like FB parts.

[tk-421]

is that better then Fiberglass?
or the same ?
FIBERGLASS


Pros:

Easy to repair (most of the time)
Less expensive to fabricate in the short run


Cons:

The material is constantly expanding (therefore it may need to be reconditioned after a few years, or even replaced in extreme cases)
Tends to splinter/break upon impact; usually loses to urethane as far as how much of an impact it can withstand
Molds need to be remade after a while (~1000 pieces)
Usually weighs more than comparable urethane pieces (depending on how much material is used)



URETHANE


Pros:

Flexes upon impact (more crash-resistant)
Usually weighs less than comparable fiberglass pieces
More cost-effective in the long run





Cons:

Much more expensive in the short run (molds are made from SS and cost a pretty penny)
If the piece breaks upon impact it is almost impossible to repair successfully (without it looking like ass anyway); usually needs to be replaced if/when that happens (as opposed to fiberglass, which is quite inexpensive to repair 9 out of 10 times)

[cali yaris]

that's nicely done, a simple to read comparison.Thanks.

might want to delete this one though, under fiberglass:
Usually weighs less than comparable fiberglass pieces

So, do fiberglass, do the smaller pieces first, and get Group Buy payments up front. Right? You know we want to support your venture! :smile:

[tk-421]

might want to delete this one though, under fiberglass:

Fixed. :thumbsup:

So, do fiberglass, do the smaller pieces first, and get Group Buy payments up front. Right? You know we want to support your venture! :smile:

Which pieces do you think I should do first? I'm willing to fabricate pretty much anything as long as it sells well enough for the bigger projects to take off.

[cali yaris]

whatever had the highest numbers on your poll?

[tk-421]

Well, the thing is, none of those pieces are truly "small". The smallest pieces are the eyelids and RBK spoilers (already in production), and maybe the sideskirts... :frown:

[tk-421]

I have decided to open this thread back up in order to give you guys an update on how this project is progressing.

I know it's been a couple of months since this poll closed, and I do apologize for not sending out updates. But that doesn't mean that I haven't been working on this. :smile:

I have been talking to lots of fabricators, potential investors, etc etc... But this is taking way too long for me.

With that in mind, I would like to see how many people are willing to pay up front in order to get this project going as quickly as possible. Of course, people who are willing to do this will get a good discount (on top of the existing discount if you are already on the list at the top of this thread).

Please post up if you're interested! I will be posting how much money has been added to the pot, as well as how much money is actually needed to get the project started.

Thanks again everybody! Hopefully we can get this going within the next couple of months.

P.S. I will post an update with the part numbers and minimum qty's tonight, so please keep an eye on this thread! :respekt:

[lowsushi]

I dont know what they are really called, but are there alot of lip spoilers/di-fusers available? (they go on the front bumper) I think that might be good to go with side skirts and the RBK spoiler.

[cali yaris]

yeah lip pieces front or back would be nice. Ones that we know fit our USDM cars FTW.

[nerd_vitZ]

yeah lip pieces front or back would be nice. Ones that we know fit our USDM cars FTW.

yeah, im definitely interested more in Lip's for the LB's that we know can fit. theyre cheaper all around and (IMO) better looking.

[thewifesyaris]

No duckbill!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!
:mad: :mad: :mad: :mad: :mad: :mad: :mad:

[tk-421]

I wish I could say yes to that, but there doesn't seem to be enough demand for them for the time being. :frown:

[frownonfun]

this would no longer include the hood then correct?

[tk-421]

Correct. The hood is being fabricated by MicroImage.

[advocate]

TK I really appreciate what you're doing here but I think it's going to be hard to get people to pay up front. Perhaps judging from the success of the Micro Image hood, you could get in touch with Garm to finish the body kit?

[Jochen]

I'm still interested in the rear bumper (modified INGS+1).

But...
Then I need to know what the final design will be. Without a hole for the exhaust? (I still think this is the best solution)
Will it fit a EU Yaris without modifications (because a JDM bumper also doesn't fit a US Yaris without extra modifications)
And I also think shipping will be a problem for me.

But...
If I get positive answer to these questions, then count me in.

[tk-421]

TK I really appreciate what you're doing here but I think it's going to be hard to get people to pay up front. Perhaps judging from the success of the Micro Image hood, you could get in touch with Garm to finish the body kit?

I agree that getting the full body kit made like this is a stretch, but at least we can get some components made this way while I can figure out how to get the rest of the stuff done.

Plus, it gives this project some traction, which can't be all that bad.

[tk-421]

I need to know what the final design will be. Without a hole for the exhaust? (I still think this is the best solution)

The final design will be exactly as you describe it. A hole in the bumper may help a few people out, but will annoy everyone else.

Maaayyyybe I can get different variations made later on (with holes in different areas), but it seems unlikely to happen at this point.

Will it fit a EU Yaris without modifications (because a JDM bumper also doesn't fit a US Yaris without extra modifications)

The bumper will be guaranteed to fit USDM cars. This means that people will not need to remove the crash bars from the car in order to fit the bumper successfully. It should also fit EU cars without problems, but your car will have a bigger butt than before. :wink:

And I also think shipping will be a problem for me.

I may have a solution for that problem. I'll ask around and let you know soon. :thumbsup:

[tk-421]

Based on (very) conservative numbers, we will need 10-15 pieces per mold in order to break even. I think that's not too bad... I still need to confirm this with the fabricator (went on a deserved vacation).

The following molds need to be fabricated:

Front bumper (MSRP: ~$350)
Rear bumper (MSRP: ~$325)
Sideskirts (MSRP: ~$325)


We already have molds for the following:

RBK Spoiler (MSRP: $180)
RBK Eyelids (MSRP: $65)


So here's what I propose:

First of all, if you are on the list at the top of this thread, you get an automatic 10% off your total order.
If you purchase one orange item, you receive a 30% discount towards the purchase of a blue item, or a 15% discount towards your total order (your choice).
If you get 2 orange items, you get either a 50% discount towards the purchase of a blue item, or a 25% discount on your existing order (your choice).
If you purchase a blue item, then you do not qualify an additional discount (since we already have molds for those pieces). You may still qualify for the first discount if you got your name on the list while it was open.


You could be easily save quite a bit of cash if you are willing to pay in advance. Turnaround times should be around 5-7 weeks (max) for the first pieces, and obviously much less for the following run(s).

Again, these prices are likely bound to change, and are posted just to get the ball rolling until I get the final prices confirmed.

What do you guys think?

[tk-421]

I just hope enough money gets raised this way in order to get these made! It would sure make me happy to have my own custom kit. :cool::biggrin:

[tk-421]

Oh, and one last thing: These prices and quantities are for FIBERGLASS molds/pieces. Urethane pieces might have to increase around 15-25% just because of the molds...

[JumpmanYaris]

OK TK I went tru most of this thread so is this just for the LB ?

[tk-421]

Yup, this thread is for LB only folks... Unless, of curse, you can gather around 15 people to do whatever you want for the sedan as well.

The point is that we need enough demand. I'm willing to get anything fabbed up as long as there's enough demand and I don't end with a huge overhead.

[frownonfun]

well damn tk this isn't looking good.

[tk-421]

I understand these prices are a bit on the high side, but they most likely will get cheaper as more people sign up to pay in advance.

I wish I had the cash to start this project on my own, but it's simply not an option at the moment.

[tk-421]

Seriously guys? Not ONE comment?
I'm going to need more input from everybody if this project is ever going to take off.

How much are you guys willing to pay for each piece? Maybe we can start there... :confused:

[Jochen]

All I'm interested in is the rear bumper, so I get 25% discount, right? (because I'm on the list)
I'm also willing to pay in advance but then I need to know if it can be shipped to Europe (and what the costs are). I know you were already looking for that.

I think most people will wait because they want to see the final product first, but I got the RBK spoiler and it's perfect, so I have faith in this.

[tk-421]

Yeah you're covered as far as the discount goes. Unfortunately that won't matter unless the people that were once interested in these pieces speak up.

[Jochen]

I'm also a little bit disappointed. First there was so much interest. And now...

And I have another question. Is there going to be a hole for the license plate lights? If so, do you know if EU and US use the same size of light? (I think they're different, but not sure)

[cali yaris]

I'm also a little bit disappointed. First there was so much interest. And now...

yeah, I learned that lesson the hard way. After ordering bodykits from Thailand based on such great interest, many members backed out when they actually got here. I still have some stock after a year+.

So I totally understand TK's appoach, which is to do this as a Group Buy with people willing to pay first. It's just too risky any other way.

[lowsushi]

I think most are scared of the cost of getting them prepped/painted/fitted on. It is one thing you really dont think about. I know that caught me off guard. Also I think people want to see a finished product to compare to others on the market.

I know I am buying a RBK spoiler with my tax refund, sorry that won't help out here though.

[JumpmanYaris]

damn this sucks ass I wish I had some money

[tk-421]

Is there going to be a hole for the license plate lights? If so, do you know if EU and US use the same size of light? (I think they're different, but not sure)

I think holes vary from country to country, so we would look into how to accommodate different plates when the time to make the molds comes.

It would be helpful if you could send me a pic of how the holes are distributed in your bumpers so that we can take a look. TIA

I think most are scared of the cost of getting them prepped/painted/fitted on. It is one thing you really dont think about. I know that caught me off guard. Also I think people want to see a finished product to compare to others on the market.

Well, maybe we could set it up so that one fabricator paints a whole bunch of pieces once they are all made. That way costs would down substantially. If there is enough interest in getting them painted, then my fabber might actually consider doing it as well. There just needs to be enough volume to justify all the extra costs.

As far as the bold part, that just can't happen. There is too much risk involved to invest in something that may/may not sell.

I know I am buying a RBK spoiler with my tax refund, sorry that won't help out here though.

That may not help with this project, but it sure helps with the spoiler project! So thanks a bunch. :biggrin:

[frownonfun]

well i already have the spoiler and don't really plan on buying anything else except maybe the eyelids but i could donate a little to the cause if it will help. say like $100. i really don't mind putting up the money for something like this. i think it's pretty cool what you are trying to do.

[Jochen]

This is the only picture I have, but you probably can't do anything with this. Maybe I can take some better pictures tomorrow.
http://www.de-smet.net/yaris/licenseplatelight.jpg

[Qmobile]

I made a front spoiler long time ago looked alright til winter ate it :(

[lowsushi]

prolly a noob question, but WTF is a duckbill?

[RacerFreakXXX]

maybe you should see if you can get a list for duckbill spoiler because I'm sure you could get 10-15 people interested.

Also I'd love a front lip for the 09+ yaris

[ROCKLAND TOYOTA]

maybe you should see if you can get a list for duckbill spoiler because I'm sure you could get 10-15 people interested.



:thumbsup:

[cali yaris]

prolly a noob question, but WTF is a duckbill?

this:

http://myscca.com/photo/250/2009/12/20/76412dfb77125aa4beb927ff7230_4.jpg

[tk-421]

maybe you should see if you can get a list for duckbill spoiler because I'm sure you could get 10-15 people interested.

Also I'd love a front lip for the 09+ yaris

Well I'm willing to get that fabricated if we can get at least 10 ppl. Who else wants a duckbill and/or lip kit?

[lowsushi]

I want a lip kit

[DandiDani]

me too. if only i had the money

[tk-421]

LIP KIT
1. lowsushi

DUCKBILL SPOILER
1. thewifesyaris
2. RacerFreakXXX

[msfire671]

awww....no love for the sedans?

[frownonfun]

between 48 & 50 users showed interest for the front and rear bumper when this thread started. where did they all go?

[tk-421]

awww....no love for the sedans?

What would you like to see in the sedan? I'm willing to get sedan parts done if there's enough ppl willing to pay up front.

[tk-421]

between 48 & 50 users showed interest for the front and rear bumper when this thread started. where did they all go?

Good question... :iono:

[lilredrocket]

Add me to the duckbill list.

I have a lip kit that I need to get painted anyways so might as well get it all done at once...

[tk-421]

LIP KIT
1. lowsushi

DUCKBILL SPOILER
1. thewifesyaris
2. RacerFreakXXX
3. lilredrocket

[ROCKLAND TOYOTA]

DUCKBILL HERE......

[tk-421]

LIP KIT
1. lowsushi

DUCKBILL SPOILER
1. thewifesyaris
2. RacerFreakXXX
3. lilredrocket
4. ROCKLAND TOYOTA

[tk-421]

bump

[tk-421]

bump

[Jochen]

It's sad... :frown:

I think it's going the same way with the duckbill spoiler. First a lot of interest and then no-one seems to care anymore.

[tk-421]

It's sad... :frown:

Tell me about it... I'm just glad I didn't invest money on this before making sure that people would actually buy these pieces.

I'm getting real close to giving up on this project.

[thewifesyaris]

I lost hope and haven't been on the forum lately but the duckbill is the only thing I would consider adding to my Yaris now. I have it pretty much the way it will spend the rest of it's days, minus that spoiler.

[cali yaris]

I'm just glad I didn't invest money on this before making sure that people would actually buy these pieces.

Amen brother. I did that. Not fun.

[gmodder]

Iam back...LIP KIT FOR ME

[cali yaris]

welcome back gmodder!

[tk-421]

LIP KIT
1. lowsushi
2. gmodder

DUCKBILL SPOILER
1. thewifesyaris
2. RacerFreakXXX
3. lilredrocket
4. ROCKLAND TOYOTA

[CtrlAltDefeat]

I am interested, but cant afford it... sorry :-/

[EleKid]

So no more bodykits?
Sorry, I've been M.I.A. since school started

[tk-421]

It doesn't look good, I'm afraid...

[Kioshi]

i was in for the rear RS look alike bumper, but i guess that didn't generate enough interests later down the road...

Reason being, maybe~ most people already have a spoiler..like myself, since 2007~late 2008..only the new members will grab up the spoiler.

[lowsushi]

yeah I am new member...2010 5DR. but still interested in body kit stuff, just the price of paint and getting it fitted was more than I can afford now.

Got to start out slow and cheap...

[Mister Z]

I'd be interested in the rear bumper.

[Jahbs]

im down for the lip and the rb altho id need to check pricing and shipping 1st and ofc see if it fits the 09 yaris they sell in aus

[DeathBeard]

someone seriously needs to make the oem lip kit like the seibon kit except in urethane..Carbon fiber sucks because it's too rigid cracks and is waaaay overpriced.. On a sidenote how much is the rear bumper (ings replica) you have pictured on page 1

[RacerFreakXXX]

If the lip kit is for the 09 then put me down, but I have a feeling none of this will actually go through. In this economy, who has the money to shell out for a body kit and paint. If you do, you are probably not spending it on a Yaris.

[marlondog]

Yeah Garm Dizzle! Just like that cf lip kit you had on your car several months back. Tell your peeps from Makalaka Butt-Butt to get off their "Thriller" dancing asses and make us some good quality lip kits. They can also ask some of those kids from Indiana Jones to help out with the cheap labor.

[DeathBeard]

You could buy the seibon lip kit and make a mold out of it and make it in urethane if that was ever made available i would buy it in a millisecond as im sure everyone else on this site