FS: New Pro-jjecc Star Type A Wheels w/Toyo T1R -- Socal

[03Z33]

Sold.

[RHDVIPbB]

damn, I just ordered a new set of rims. This is close to what I got though. Thats a great lip and offset though

[03Z33]

up

[03Z33]

ttt

[solarVitz]

wow those are nice. i wonder what they look like on a yaris. do you have a pic of the actual wheel and stretched tires by any chance.

[03Z33]

I'll get some pics tomorrow, didn't have a chance today.

[03Z33]

up

[03Z33]

added pics of actual wheels and tires.

[contraband831]

those are sic, i wish i had the money to make those work on my yaris...

bumpity for some dopeazz wheels

[07blackvitz]

Would they actually work on the Yaris or do i have to roll and pull the fenders and raise my car a little its lowered on tein coilovers.

[07blackvitz]

Dang so you go rid of the Yaris and got a Z33? I liked your Yaris a lot so clean,what was the lowest offest and widest we can run on Yaris i was thinking to get some SSR markIII 15x7.5 +15 would it work?

[03Z33]

Would they actually work on the Yaris or do i have to roll and pull the fenders and raise my car a little its lowered on tein coilovers.

The lower the better for looks. The front will work no problem, we can test fit the rears on your car if you'd like, I'm in Anaheim, just let me know when you can stop by. No need to raise the car, or roll/pull the fenders. There's nothing to roll on the rear of the Yaris and pull is ugly.

Dang so you go rid of the Yaris and got a Z33? I liked your Yaris a lot so clean,what was the lowest offest and widest we can run on Yaris i was thinking to get some SSR markIII 15x7.5 +15 would it work?

Those ssr wheels would work fine, pretty easy fit. These Star wheels in 16x9 et20 would actually fit much nicer, but they are on the aggressive side of fittments for the Yaris. Widest I've tried on stock non-pulled fenders was 15x9.0 et0 with a 195/50/15 tire and it poked a bit but no rubbing.
I got a Z34 now, don't have much money to mod it yet but hoping to start sometime in the next few months...

[03Z33]

up

[blacksandiegovitz]

The lower the better for looks. The front will work no problem, we can test fit the rears on your car if you'd like, I'm in Anaheim, just let me know when you can stop by. No need to raise the car, or roll/pull the fenders. There's nothing to roll on the rear of the Yaris and pull is ugly.



Those ssr wheels would work fine, pretty easy fit. These Star wheels in 16x9 et20 would actually fit much nicer, but they are on the aggressive side of fittments for the Yaris. Widest I've tried on stock non-pulled fenders was 15x9.0 et0 with a 195/50/15 tire and it poked a bit but no rubbing.
I got a Z34 now, don't have much money to mod it yet but hoping to start sometime in the next few months...

Oww weeee Jeff you're such a baller lol 370z ef'n nice man ! I wish I had some extra cash for these dope wheels

[07blackvitz]

Another quick question Jeff about rim size,would a 15x8 +15 work okay on the yaris or am I gonna have some serious rubbing issues???and i was also thinking a 15x8or15x7 et0 but i think that might be pushing it? would i have to roll the and pull fenders for these sizes or can i get away with adding some negative camber in the fronts,and a light fender roll???only reason i ask because your the only one that i seen run aggressive fits.Do you have anything else for sale from your Yaris??? do still have those 17inch Racing Harts?

[03Z33]

Oww weeee Jeff you're such a baller lol 370z ef'n nice man ! I wish I had some extra cash for these dope wheels

Thanks man, I really can't afford the Z either but I had to change it up, it was a great deal I couldn't pass up.

Another quick question Jeff about rim size,would a 15x8 +15 work okay on the yaris or am I gonna have some serious rubbing issues???and i was also thinking a 15x8or15x7 et0 but i think that might be pushing it? would i have to roll the and pull fenders for these sizes or can i get away with adding some negative camber in the fronts,and a light fender roll???only reason i ask because your the only one that i seen run aggressive fits.Do you have anything else for sale from your Yaris??? do still have those 17inch Racing Harts?

15x8.0 et 15 should be easy fit with a 195/50/15 tire, or 195/45/15 if you prefer a stretch. The AME wheels I used to run were 16x8.0 et 25 front and et 18 rear with 195/45/16 tires and the front had no problems, rear would only rub on really steep driveways before I cambered the rear wheels, after camber no more problems.

The 17" racing harts sold to echo hrs, can't wait to see pics of them on his new ride! Not much else left over from the car, just some oem parts.

There is no reason to ever pull or roll a yaris fender. The rear has no material to roll and a pull is ugly. The front just needs the fender liner trimmed or removed and the lip cut for very aggressive setups. 99% of the time you won't need to do anything in the front.

[07blackvitz]

Hey Jeff would u sell me the fronts for now with tires and maybe I can. Work something out to pay for the rears? I'm out in Tustin area maybe we can meet next week sometime if you are down to sell the fronts and how much would you do the 2 fronts with tires? Let me know asap

[03Z33]

Hey Jeff would u sell me the fronts for now with tires and maybe I can. Work something out to pay for the rears? I'm out in Tustin area maybe we can meet next week sometime if you are down to sell the fronts and how much would you do the 2 fronts with tires? Let me know asap

PM sent :thumbsup:

[Speedjunkiejp]

i really would like to see these mounted in the rear on a sedan.. i so want to pull the trigger though. I was looking at a set of fabulous expands 16x7.5 +7 but these bring out the euro in me, i just got rid of an e30 :-(

[marcus]

wow thats one stretch tires....rebore to fit a 4x100..???

[jekqmb]

Ooooo man i love those wheels! So dope......

[VolksWaggin]

im in cali you still have the wheels?? if I sale my mercedes alphards (http://forums.vwvortex.com/zeroforum?id=804) I'll try and work something out with you



http://farm3.static.flickr.com/2513/3907449337_898dab099f.jpg these always get voted into the most stretch category at car shows.

[03Z33]

PM sent, I still have these, no tires.

[Yarice]

willing to trade for some 15x8 +36 949 6UL w/tires?

[TEHxFALLEN V1.2]

Nice sig, jekqmb

[03Z33]

No thanks on the trade, I have no use for 4x100 wheels, sold my Yaris.

[Tamago]

Another quick question Jeff about rim size,would a 15x8 +15 work okay on the yaris or am I gonna have some serious rubbing issues???and i was also thinking a 15x8or15x7 et0 but i think that might be pushing it? would i have to roll the and pull fenders for these sizes or can i get away with adding some negative camber in the fronts,and a light fender roll???only reason i ask because your the only one that i seen run aggressive fits.Do you have anything else for sale from your Yaris??? do still have those 17inch Racing Harts?

here's 15X8 +20 front and +7 rear

http://i40.photobucket.com/albums/e239/fatherdutami/therealenth/P1020216.jpg

http://i40.photobucket.com/albums/e239/fatherdutami/therealenth/P1020213.jpg

[dumpster]

pm sent if it worked

I'll take them cash in hand/paypal

[boonzaayer9]

Two questions..
Center caps included? and Would you sell a set of all 16x9's?

[03Z33]

wheels are sold and no longer available. they aren't bringing any more of these.