offset for 7in on nf210s

[ezhacker1]

Iv been doing some searches for Team Dynamics 15x7s, i dont know what offset i should go with. I have a 12mm spacer right now on my steelies, so i was thinking of combinations like 40mm and 12mm spacer, etc. Iv used http://www.1010tires.com/WheelOffsetCalculator.asp to help me decide. I do sometimes have about 300lbs in the back seat, and 250lb in front (me included), and if i do need to have more weight in the back, i could always swap to stock springs, shouldnt be too hard.

*whats the ratio when it comes to the stock height weight load and lowered car?

[ozmdd]

40mm should work with that spacer. With 15x7 wheels, you should have room to work with. I run 15x7 +35mm racing wheels with 205-50-15 Kumho XS's and NF210's, and I have room to spare all the way around. Even if I had a rear spacer, it would be fine.

[Tamago]

if you go with +35 you'll probably rub a bit in the rear when carrying a lot of weight/passengers.

penguin garage rear camber shims would solve that.