AMK HEADER

[C_03]

:iono: I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO? :iono:

[jonismyname]

:iono: I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO? :iono:

drill hole, weld bung.?

[C_03]

and thats looks good?

[ivanmadeline]

:iono: I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO? :iono:
Desde cuando se necesita eso en pr???????????????

[YarisSedan]

Find a mufflershop to drill a hole and weld a o2 bung. Its not that hard shouldnt cost you more than 50 bucks.

[C_03]

jajajaj lo q pasa es q no quiero tener el chek engine prendio siempre

[ivanmadeline]

como dice el de arriba llevalo a un muffler shop que te le anadan la tuerca para que le puedas adaptar el sensor. En la isla creo que lo hagan en todos los chop. por eso estrano la Isla tanto por los inventos que uno le puede hacer a los carros.

[C_03]

SI LO Q QUIERO SABER ES Q SI DESPUES ESO SE VE FEO TAMBN ME DIJERON Q LO DEJARA ASI Y PUSIERA EL SENSOR AL PRINCIPIO DE LA TUBERIA DESPUES DEL HEADER

[thebarber]

sounds like you got a header for a first gen 1nzfe for an echo or xb....they don't have an 02 sensor bung like the yaris does.....and its not likely to line up w/ the midpipe

[C_03]

I DONT KNOW BUT I BOUGHT THE HEADER ON EBAY AND SAID 07 + YARIS TAKE A LOOK http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?VISuperSize&item=220532661948

[YarisSedan]

Sorry but you got what you paid for. I never really buy any car parts from ebay. Only thing i got from my yaris from ebay was fog lights and even those didnt fit right. Everything else its from reputable sources.

[YarisSedan]

My friend bought a intake manifold from ebay once we had to sand down the flange where it mates to the cylinder head because it was such a horrible job. Not even a smooth flat surface. They are only mass produced cheap low quality parts which is why they are so cheap. Cheap and good are not general used in the same sentence.

[1.5]

man when buying off ebay you really have to do your research. A good rule of thumb, never buy performance parts off ebay. Good luck tho.

[cali yaris]

You have to have a bung and O2 (air/fuel) sensor on your header. If it's actually for an xB (first gen), you'll have trouble lining up the exhaust also.

Looks don't matter, the header goes behind the motor anyway.

Someone should report the seller for misrepresenting that product to fit the Yaris.

[1.5]

or you could file a dispute thru Paypal if you used them. One of the options for the dispute is "item did not match description" or something like that so you can file that and the seller will usually arrange a refund so he doesnt have bad marks against his ebay account.

[Caribe]

Le puedes soldar una tuerca con esa rosca detras del header, lo importante es que el sensor este antes del catalitico. En que pueblo estas?

[eii]

mhmm, i posted about this already. had a shop drill a hole and put a bung on it for the sensor. the collector doesnt fit perfectly to the midpipe like mentioned. possible leak, but ive been running it for months now without problems. made my yaris sound mean as hell though. people shit bricks when they hear it lol.

[1.5]

eii lets get a vid

[eii]

These are old, I meant to make some newer ones, but you get fair sound during the clips.

http://www.youtube.com/watch?v=rgQiuWupPgw
http://www.youtube.com/watch?v=qgHsk0qppZ8

This is what it sounded before headers

http://www.youtube.com/watch?v=fIG0OPV0Oog

Mods are in my sig.

[1.5]

damn man what a growl from the yaris. lol nice work

[eii]

haha thx. yeah i love it, if only it was manual. oh well, yaris dd for now and then hopefully 86 or sw21/22 for fun :').

[1.5]

o true yea boosted mr2 ftmfw!

[Elchikodepr]

:iono: I BOUGHT A AMK HEADER AND DONT HAVE DE 02 SENSOR HOLE CAN I INSTALL WITHOUT THAT OR WHAT I CAN DO? :iono:

Yo tengo el AMK header y en la moflera pides que te solden la rosca del sensor como te mencionaron ya. No se ve feo, no prende el check engine y funciona bién.