PDA

View Full Version : Door latch removal


Carolyn
01-19-2010, 05:49 AM
Hi - How do you remove the driver's door latch on my daughter's 2004 Yaris? The cable has broken between the inner door opener and the latch. I have removed the door panel, undone 3 screws and a bolt securing the latch. Now the latch is only attached by the outer door handle lift rod. How can I detach this from the door latch? Many Thanks Carl.

DaveJohnCrowley
01-20-2010, 07:11 PM
I have the same problem. only happened to me today if you have found the solution can you let me know.

Cheers

CTScott
01-21-2010, 12:21 AM
31276

new-yaris-owner
08-03-2012, 05:26 PM
Old thread resurrection !

Is this all I need to know if I want to replace the driver's door latch ? I know how to remove the inside panel... I will see what stuck me tomorrow when I will install it.

Many thanks!

madcat
10-31-2013, 05:52 AM
Another resurrection, exactly the same problem! How do i find out the exact product code for the replacement cable? I want to make sure I get the right one for a 2004 Yaris, 2 door version.

CTScott
10-31-2013, 08:58 AM
Another resurrection, exactly the same problem! How do i find out the exact product code for the replacement cable? I want to make sure I get the right one for a 2004 Yaris, 2 door version.

There are a few variations for your French made Yaris. PM me your VIN and I can tell you exactly which one is used on your car.

IllusionX
11-01-2013, 10:36 AM
04 EU yaris uses rods.

CTScott
11-01-2013, 10:50 AM
04 EU yaris uses rods.

Correct - Rods for the locks, but still cables for the inside door handle (which is what I believe the OP is looking for).

IllusionX
11-01-2013, 03:37 PM
You are right.. cable from the handle