PDA

View Full Version : Polyurethane? Bushing Kits?

bronzebullet232
02-02-2010, 11:47 PM
Does anybody know of any poly stuff for out cars? I wanna make my car as solid is possible. Exhaust hangers? Anything?


Subaru's have KARTBOY, so where's the yaris bushings? haha
ozmdd
02-03-2010, 11:42 AM
Garm found poly exhaust hangers, so you might ask him.
DerFlosser
02-03-2010, 12:33 PM
Garm found poly exhaust hangers, so you might ask him.

Interested in these...
kngrsll
02-03-2010, 03:47 PM
no luck here. ive been looking forever. there are only a couple on the car, a few in the front arms, and a couple big fat ones in the rear twist beam. then there are a couple engine and tranny mounts as well.
RHDVIPbB
02-03-2010, 07:42 PM
I never finished it because I didn't have any spare parts, but a small amount of aftermarket bushings for the tC were very close to the Yaris. Most were the same measurements, but I never got a chance to see if they would fit.
kngrsll
02-03-2010, 09:17 PM
I never finished it because I didn't have any spare parts, but a small amount of aftermarket bushings for the tC were very close to the Yaris. Most were the same measurements, but I never got a chance to see if they would fit.

interesting, will look into it.

also, i think the MR-S and the Yaris share the same part # for front lower control arms. so, the bushings should match as well. i found that out when i was looking at mooncraft roll center ball joints.
cali yaris
02-03-2010, 09:59 PM
I have all the TRD bushings from Japan, they actually make quite a few.

I'll take some pics and post up all the parts you can get for your Yaris.
RHDVIPbB
02-03-2010, 10:22 PM
really for the MRS? The local shop has a guy with a really well built MRS for auto-x and road course racing. Might have to stop by and see what he has.
bronzebullet232
02-03-2010, 10:55 PM
I have all the TRD bushings from Japan, they actually make quite a few.

I'll take some pics and post up all the parts you can get for your Yaris.

OMG. Please do. I Pm'd you too. If you got them, I wanna buy em. As usual stop buy on my lunch... lol
kngrsll
02-03-2010, 10:56 PM
the mooncraft A arms were the same part number, so that what im basing that on! illl look some more and make sure...
kngrsll
02-03-2010, 11:07 PM
here is the site im talking about: http://www.rhdjapan.com/catalog/product/view/id/22918/s/moonface-super-lap-roll-center-arms-vitz-mr-s-zzw30-60204/

the MR-s and yaris are listed under the same part #
RHDVIPbB
02-03-2010, 11:58 PM
ooh, those are nice. But what year vitz? I might have overlooked if the site listed it.
kngrsll
02-04-2010, 12:07 AM
It lists the NCP91, which is our chassis and the ZZW30, the MR-S
DerFlosser
02-04-2010, 10:31 AM
I am just interested in some poly exhaust hangers. Garm....are those available through TRD?
cali yaris
02-04-2010, 12:27 PM
I have some in my shop that look just like these:

http://www.cobbtuning.com/products/?id=2255

http://www.good-win-racing.com/Mazda-Performance-Part/60-1095.html
DerFlosser
02-04-2010, 01:29 PM
Those COBB ones look nice. Are they the same dimensions as the Stock ones? Are they what you use?
bronzebullet232
06-11-2010, 02:37 PM
Those COBB ones look nice. Are they the same dimensions as the Stock ones? Are they what you use?

Well I ordered the cobb ones. Hopefully they will work. I'll let you guys know.
bronzebullet232
06-18-2010, 04:45 PM
Well I ordered the cobb ones. Hopefully they will work. I'll let you guys know.


So I ordered the 15mm cobb exhaust hanger for the 2004 - 07 WRX. Its too long and the holes are too big... It was worth a try.:iono: