PDA

View Full Version : engine revs when clutch depressed


Yaris#2
02-14-2010, 06:14 PM
I just got my 2010 Yaris 5 door hatchback yesterday. It has a manual transmission and when the clutch is depressed to shift gears, the engine revs about 300 to 500 rpms (this is with my foot completely off the gas pedal). By the time I actually get the gears changed, the rpms drop to the point that letting the clutch out decelerates the car.

Has anyone else experienced this problem? If so, is there an easy fix?
I have been driving manual transmissions for many years so it isn't like I am learning. My previous 2008 Yaris was an automatic, and I noticed that it would maintain speed for a few seconds after my foot was removed from the gas before it started decelerating. I am wondering if this is a common trait of the vehicle?

Kaotic Lazagna
02-14-2010, 06:25 PM
That's drive by wire for ya. lol. You'll adjust and relearn how to drive with it.

Yaris#2
02-14-2010, 06:31 PM
Well, I have found that taking my foot off the pedal and waiting about half a second to depress the clutch it only revs about 50 rpm and then holds long enough to shift smoothly. Of course then when I get in my 97 Nissan pickup and do the same thing I feel like I'm at the rodeo:laugh:

intioumaximus
02-14-2010, 07:16 PM
my 08 subaru does this too.

DaveG
02-16-2010, 11:56 PM
I got my yaris about 2 months ago, and I'm just about all adjusted. Drive by wire is exactly what that is!

Yaris#2
02-20-2010, 05:37 PM
I'm getting used to it, but it sure makes jumping out of the car and into the truck exciting.

Kaotic Lazagna
02-20-2010, 10:44 PM
hahahahahaha. None of my friends or immediate family drive stick shift, so I don't get the chance of driving a stick with cable-actuated throttles. hahahaha.

djct_watt
02-20-2010, 11:28 PM
I think it has more to do with engine management and a heavy flywheel than the drive by wire. I notice the same thing on both my tC in the USA and the yaris here in Thailand. Here is a simple test:

turn the key to on, but do not start the engine. Do this in a quiet place. Now press the accelerator and release, and you can hear the throttle plate responding... It's near instantaneous with no lag.