View Full Version : Muffler...
ChinoCharles
11-14-2006, 01:46 PM
Okay, so after I get my headers I am going to be looking to get a dual-tip muffler... I'm going to have a pipe custom-bent from the midpipe back to give me a center exit exhaust... your basic straight pipe, only I'm keeping the cat. No law breaking for me. I want to retain the stock exhaust diameter. Now, a couple questions.
[1] What is the stock diameter?
[2] Are there any sensors in the stock axle-back unit that will make this impossible?
(edit: answered my own question, there aren't any)
bigsky2
11-14-2006, 02:26 PM
Okay, so after I get my headers I am going to be looking to get a dual-tip muffler... I'm going to have a pipe custom-bent from the midpipe back to give me a center exit exhaust... your basic straight pipe, only I'm keeping the cat. No law breaking for me. I want to retain the stock exhaust diameter. Now, a couple questions.
[1] What is the stock diameter?
[2] Are there any sensors in the stock axle-back unit that will make this impossible?
(edit: answered my own question, there aren't any)
Damn I'd answer you if I was at home because I was just putting away the old muffler/exhaust.
If no one else answers you, I'll check when I get home.
ChinoCharles
11-14-2006, 04:09 PM
Thanks bro, no big hurry. Gotta make my Christmas list this week, haha.
ChinoCharles
11-14-2006, 04:18 PM
http://www.meganracing.com/products/product_detail.asp?prodid=65&catid=45
Say 2.25" please.
the_saint
11-14-2006, 04:24 PM
I really doubt the Yaris exhaust is 2.25". It's probably like 1-7/8" or 2".
But fret not my friend, a competent exhaust shop could take care of that in a jiffy. :biggrin:
btw...that looks like the muff hasher's going for.
jcove
11-14-2006, 07:02 PM
Vibrant's exhaust will be out soon if not already.
RossP
11-15-2006, 04:53 AM
Megan Racing are making an exhaust too, but not sure when it's going to be out, or what one of their exhausts it uses
Violin
11-15-2006, 11:06 AM
I just got my Borla performance exhaust from Canada today!
I just got my Borla performance exhaust from Canada today!
I just got my Borla performance exhaust from Canada today!
Katana
11-15-2006, 01:09 PM
Tell us some opinions!
mikeukrainetz
11-15-2006, 01:28 PM
Vibrant is out - talked to a guy there in R&D and the intake was out in the summer and the exhaust is out in November or worst case the spring.
Violin
11-15-2006, 01:51 PM
Tell us some opinions!
I still have to put it on but it sure is pretty.
ChinoCharles
11-15-2006, 02:14 PM
Soooo how about that stock exhaust diameter?
bigsky2
11-15-2006, 02:23 PM
lol, poor Charles.
ChinoCharles
11-15-2006, 02:34 PM
-sniff sniff- hahaha
Violin
11-15-2006, 03:19 PM
About so big.
the_saint
11-15-2006, 03:28 PM
ROFL!
Violin
11-15-2006, 03:50 PM
:biggrin: Using a ruler and looking at the aftermarket muffler it looks like about 1 3/4" but if you can wait until I can crawl up under the car to install this, I can give you a better idea. :biggrin:
ChinoCharles
11-15-2006, 08:19 PM
Sounds good... I'll roll with "so big" for now. :bellyroll:
Violin
11-16-2006, 08:27 AM
It was kind of hard to get an accurate meaurement because of the flange on the end but it is less than 1 3/4" - around 1 5/8" but it's likely one of those metric numbers favored by the more backwards nations.
ChinoCharles
11-16-2006, 01:52 PM
Thanks Violin, much appreciated.
Black Yaris
11-16-2006, 07:47 PM
Violin, how much did the borla set you back?
Violin
11-16-2006, 10:06 PM
It sells for $711 CAN installed, but I got a pretty good deal on it with three weeks use. I have a video clip loading on YouTube but their servers are really taking a beating tonight.
It has a real deep bass note and is louder than the TRD - it's a straight through design so that's no surprise. Going by my seat of the pants dyno, gains are similar to the TRD except at the top end where it really opens up.
Violin
11-16-2006, 10:48 PM
Borla Performance Exhaust: http://www.youtube.com/watch?v=iROp9aPaltc
TRD Sport Exhaust: http://www.youtube.com/watch?v=T3cnyLYwCMk
hasher22
11-17-2006, 01:52 AM
i recieved my muffler today.......gonna go to some mechanics and ask for a quote and to install it straight! :)
bigsky2
11-17-2006, 03:17 AM
Borla Performance Exhaust: http://www.youtube.com/watch?v=tszff5kHirk
TRD Sport Exhaust: http://www.youtube.com/watch?v=T3cnyLYwCMk
So which one you gonna keep?
I take it the Borla because you are in love with those tits, I mean tips. :wink:
Violin
11-17-2006, 05:42 AM
So which one you gonna keep?
It's a very tough call. I'm gonna drive around with the Borla for a while yet to evaluate it more. It's all polished stainless steel - a thing of beauty.
Black Yaris
11-17-2006, 06:04 AM
It's a very tough call. I'm gonna drive around with the Borla for a while yet to evaluate it more. It's all polished stainless steel - a thing of beauty.
I call dibs if you decide to sell either, if no one has yet
Violin
11-18-2006, 11:11 AM
Some photos:
Chris07LB
11-18-2006, 11:39 AM
I call dibs if you decide to sell either, if no one has yet
Dibs has been called weeks ago.... just waiting for V to choose. :headbang:
I'm hoping he keeps the borla..
spkrman
11-18-2006, 09:49 PM
i like my magnaflow :)
http://i61.photobucket.com/albums/h54/spkrman/th_magnaflowonyaris1.jpg (http://s61.photobucket.com/albums/h54/spkrman/?action=view¤t=magnaflowonyaris1.flv)
Violin
11-19-2006, 07:08 AM
Borla is sold - I'm keeping the TRD.
(sorry Chris)
bigsky2
11-20-2006, 05:12 PM
Borla is sold - I'm keeping the TRD.
(sorry Chris)
Glad you stayed with Team TRD.
REPRESENT.
Violin
11-20-2006, 05:22 PM
That's Team TuRD, isn't it?
What an unfortunate acronym.
bigsky2
11-20-2006, 05:24 PM
That's Team TuRD, isn't it?
What an unfortunate acronym.
I saw that one coming as soon as I clicked Submit Reply.
TEAM TuRD.
spkrman
11-20-2006, 11:38 PM
i'd say team TuRDy would be more like it, more phonetically correct :)
Violin
11-21-2006, 06:15 AM
We need decals and hats.
vBulletin® v3.8.11, Copyright ©2000-2026, vBulletin Solutions Inc.